Hanging At Startup Applying Setting
Aug 25, 2005PC has started to hang at the 'Applying your settings' screen on a regular basis. what may be causing this? AV/Anti spyware and all Windows patches are up to date.
View 1 RepliesPC has started to hang at the 'Applying your settings' screen on a regular basis. what may be causing this? AV/Anti spyware and all Windows patches are up to date.
View 1 RepliesThis happen to all my clients, i'm using Win2003 as my server, and i set only a Group Policy, which is "set all the local administrator password to be the same with the domain admin" <only 1Kb in size> but i don't know why, all the clients takes up to 2-3 minutes to go to the ctrl+alt+del screen. no virus or spyware detected by symantec.
View 2 Replies View RelatedI am currently running XP on my system. About three days ago, my system suddenly started taking longer to boot. The extra boot time comes in the form of a black screen with a flashing cursor in the top left, where my system does not appear to be doing anything. This screen appears immediately before the Windows XP loading screen. I have tried Tweak XP utilities to try and speed up my startup. Failing that, I tried a system restore to a few days prior to this strange occurrance. Every time I try to run system restore, however, I am confronted with an error upon startup that tells me that system restore was unsuccessful. I have tried a variety of system restore dates, and all have been unsuccessful. I have tried sweeps with Spysweeper and Norton, and neither have brought any more insight into this problem.
View 11 Replies View RelatedI've had this computer working for quite a while, at least a year, and I reinstalled XP a few days ago to rid the computer of spyware, etc. It installed with no errors, and worked fine for a few days after the reinstall. Last night I shut it down, started it back up this morning and it hangs on the Windows XP loading screen, the green bar keeps going through but it never boots. The same thing happens when I boot with the last good configuration that worked. When I boot in safe mode it hangs while it loads the safe mode files, the last one is Mup.exe, Mup.dll, or something that starts with Mup. MemTest86 shows no errors, so I guess its not the memory, and I don't know why anything would just stop working. I didn't install any new hardware, software, or drivers right before I shutdown last night. Here are my computer specs: Asus K8V SE Deluxe Motherboard. Athlon 64 3200+ CPU. 1GB (2 x 512MB) PC3200 Kingston Value RAM (Non-ECC). 250GB SATA Hard Drive (It's either Maxtor or Seagate, if you really need to know which I can check).ATI X800XT Video Card. Windows XP with the SP1 CD, but I downloaded and installed SP2 and it was running fine with SP2 for a few days.
View 10 Replies View RelatedPlease help. I have upgraded a machine from 98 to XP pro. Now on start up, the pc hangs/freezes on the windows XP screen, the one with the blue scrollong bar at the bottom.
View 1 Replies View RelatedI am using a laptop I am not very familar wth but it has been working fine for a few years until recently whenever I turn it on it gives me choices to start normally or safe mode, and whichever I choose, starting normally the loading screen loads infintely or loading the required drivers for safe mode stalls after Mup.sys. I have looked around and tried to boot from the winxp cd to attempt a repair console but as soon as I switch on the computer it almost immediately goes to the safe mode selection screen after flashing Toshiba for a few seconds, and from here I can't do anything. I can't get into BIOS, or bypass anything. There might be a quick keyboard command I am not aware of but I seem to be stuck in a loop. The computer is a Toshiba Protege A100.
View 5 Replies View RelatedAfter starting my computer some programs won't start within the first two-three minutes after XP has finished loading. Winamp (5.5) shows the main window frame but doesn't load any further, Ad-Watch 2007 doesn't load while Ad-Watch SE loads fine, MSN Messenger doesn't load at all and IE7 starts but refuses to load any web pages. Firefox and Word 2007 are not affected. All of these annoyances disappear entirely after about three minutes after which all programs work just fine. In the three minute time frame I am also unable to access My Computer which just shows the flashlight looking for drives. I am, however, able to access files by using shortcuts to eg My Documents.
View 2 Replies View RelatedLong story but I've been having some serious issues with my dell desktop and XP... here's the story in chronilogical order. My system was running fine other than the fact that a friend noticed the hard drive was clicking frequently when the system was idle (about every 2 seconds) - he suggested I may have a virus. My own virus scan/shield (PC-cillin) never identified anything. I installed Avast and ran a boot scan - some form of Trojan was found and deleted. Some form of Adware was also found and deleted. Sometime either just before or immediately after the boot scan I started having problems. XP would startup quite quickly. I would log into one of the two user profiles (home edition of XP) but when I tried to launch IE it would sit for 10 minutes and not connect to anything. After about 10 minutes the page would finally load and everything would seemingly work fine. Note that during this time I could go to cmd and ping sites no problem. I started troubleshooting and realized that it was not just IE that would sit and hang - other system applications such as System Properties, Add Remove Programs, etc would take about 10 minutes immediately after startup before they would do anything. Once the system "woke up" it would seem like everything operated fine. To try to cure this I tried; - uninstalling several unnecessary applications- uninstalled Avast - installed AVG and scanned (everything clean)- removed all programs from Startup / Run - disconnected mapped drives, removed sharing from folders - resetting IE to defaults. None of which solved the problem. I tried booting into safemode and the system did seem to operate much better but of course I couldn't browse the web etc.I since reinstalled Avast and reran the bootscan - came up clean. I have just recently tried System Restore to a date where everything was fine. Now XP won't start up. I get to the profile page, choose my profile and it just hangs on a blank desktop. what I haven't tried yet is booting into safemode and running a virus scan. With the system restore causing me to hang I'm not 100% sure I can even boot into safe mode but will try when I'm back home tonight. If I'm successful I'll likely undo the system restore, turn off system restore, run virus scan in safemode.
View 1 Replies View RelatedI am running windows xp on my home puter and somehow it seems to hang for about 1min 30 sec at the stratup screen then will hear the floppy drive check itself and then it will be able to let me logon. After that it seems to not hang anymore. AMD Athalon 1800+. 200 GB HDD. 2GB Ram. 1 cd-r. 1 dvd+/- R. 1 dvd rom. 1 floppy. g-force 4 video card gigabyte 7vaxp mobo.
View 1 Replies View RelatedMy PC has recently started hanging during startup. It usually happens before the Windows XP logo appears. The startup process just stops, the screen stays black, the hard disk drive goes quiet and the activity light stays on (rather than the normal flickering).All I can do when this happens is hold down the power button until the power goes off.Also, when it does startup properly, after logging into XP it takes an unusually long time to load the settings,startup programs, etc and sometimes some of the normal system tray icons dont appear at all
View 14 Replies View RelatedI try to start up, and it doest freeze, but it hangs after I type in my password, I can move the mouse, but my busy light blinks in controlled blinks... either way, It just did this after I removed some old nForce chipset drivers, then reinstalled them. I used DriverCleaner, and updated to my motherboard's latest drivers. My mother board is a MSI K8N Neo4-F (Socket 939)... AMD Athlon 64 3500+, 2gb ram, XFX 7900GS XXX Edition. Before I backup drivers and files and reformat? I have to restart the computer a few times to get it to get past the login screen, and the nVidia BIOS screen will change font sizes, but not by much, after every other restart... But everything runs smooth when I start in safe mode. Also - Once I turn the computer on, the busy light is going on full, all the way untill windows gets to the login screen. UPDATE: Loads have not been as slow, but I cant still log in, unless in safe mode.
View 1 Replies View RelatedBought a Dell laptop with Windows XP for college last semester. She's had it for about six months now and earlier today upon startup it hung for a very long time (about 20 minutes). She rebooted it to the same results. I tried doing the only thing I knew how which was booting it in safe mode, which gave me a brief flash of a blue screen before restarting. I went to safe mode again so I could make out what the error message was before the computer restarted itself and I saw that it said KERNEL_INPAGE_DATA_ERROR. There's an error number at the bottom, but the screen flashes by so fast that I can't make it out. Anyway, it's been a few hours and startup is still hanging. I have tried booting it in the last good settings mode and nothing seems to work. I'm not very PC savvy (yes, I am a mac user :P) and my limited knowledge doesn't really help in this situation. I asked her if she had deleted any files which might cause a startup problem and she said that she hadn't. She uses the computer strictly for her iPod, printing papers, and burning the occasional CD. There are a few harmless games which have been downloaded for a long time now, but I don't think that she recently installed any software that could cause a kernel inpage data error, whatever that is. Her most recent piece of installed software is for her new phone, but even that was a week ago. When this problem started, the laptop wasn't very hot so I don't think that would be a problem either.
View 1 Replies View RelatedAfter buying and installing the new hardware i'm now having some issues. Everything was fine for weeks but now sometimes i get an error message. This is the 2nd time this has happened. Everything starts up as per normal but once it comes to the Windows screens (desktop) i get a blue screen with the error message: So i pretty much need to restart the pc and it goes back to normal. All hardware and software has been checked time and time again. All seems to be ok. Bar the dvd drive. The dvd drive doesn't let me access it, however if i put a dvd, audio or data cd in then autoplay takes over and asks if i want to play it or whatever. But if i want to open it by double clicking or selecting open after right-clicking then it doesn't allow it. I get the error message: d: not accssible. Incorrect function.
View 1 Replies View Relatedmy windows xp home edition hung and now shows a black screen everytime i start the computer. how do i cancel installation? do i have to access and the bios, and if so how do i do this
View 2 Replies View RelatedWindows display setting keeps resetting after startup On startup of my computer the monitor screen displays normal sized icons, then enlarges to gigantic icons. After all programs are started I right click on the screen and click on properties. Display properties open, then I click on settings and move the slider to my likings, I click apply and the desktop reverts to normal size and operates in all areas normally. The problem is I have to perform this task every time I restart my computer. It's obvious that the apply/ok
setting in the display properties setting is not sticking. Is there a fix for this condition? Please HELP. Running Windows XP.
Submitted by: Mel W. Here are some featured member answers to get you started, but please read all the advice and suggestions that our members have contributed to this question. ....
I have a Dell D610 laptop running WinXP Pro. The screen is an SXGA+ (1400x1050 resolution). I have a docking station at home and use a 19" wide screen LCD monitor (1440x900). My docking station at work has a 23" wide screen LCD monitor (1920x1200). The laptop and home 19" monitor look good at normal size (96 DPI) setting. However, the large 23" monitor needs the Display DPI Setting increased to large size (120 DPI) for my old eyes.
The problem is having to constantly change between normal and large display DPI settings. This change requires a reboot to take effect. Is there a program or script available that will run at startup and allow me to choose the DPI setting? Even better would be a startup script that detects which monitor is in use and sets the display DPI accordingly.
He did not setup the device settings (i.e. tell my computer what trays the unit has, paper deck, sorter, etc.). I set up those items after he was done under "Installable Options" in the Device Settings tab in the properties. Trouble is....it doesn't see the changes I made--it defaults to the settings the sysadmin made. I can print, but the trays are not correct and I cannot print from the paper deck which is our standard paper.I cannot even get a PDF to "fit to page" when printing to this printer.
View 1 Replies View RelatedI have to uninstall unlicensed applications from hundreds of users and to manually do this would take the better part of the year. There is a login script running on the domain that can not be changed so the only thing I can think of is adding a login script to a GPO and then linking those users to that GPO but the GPO doesn?t seem to apply. Ill post the steps I did below. First thing I did was create a OU unit under Managed OU named Software removal login. Under the Software removal login I created a Global Security group named Unlicensed app users and added the users to that group.
I then opened GPMC.MSC and browsed down to the managed group and right clicked software removal login OU and selected create and link a GPO here. I named the GPO Adobe and then right clicked it and selected Edit. I set the user logon script and closed the GPO window. Then I clicked on the GPO link under Software removal Login OU. Under scope I removed authenticated users from the Security filter and added the Unlicensed app users group. Under Details tab I changed GPO status to Computer Configuration settings disabled..........
After upgrading are users from 2000 to XP the users will change the folder view from tile to details and click the apply to all folders. The setting will not apply to all the folders.
View 1 Replies View RelatedThere is a delay of 5 to 10 minutes "applying your local settings" before going into Windows desktop. It may be a DNS issue on the server, but the only DNS setting I have on the local area connection on the server is 127.0.0.1. Everything seems to be working fine but this is a source of frustration if a workstation needs to be restarted.
View 7 Replies View RelatedI just finished a complete reinstall of Windows XP. Before the re-installation, I partitioned the hard drive. I want the basic Windows XP system files and drivers on my "C" drive and then I want to accumulate data files (word processing, spreadsheets, photos, music files, etc.) on the new partition which in this case has been labeled the "G" drive. The difficulty I am having is getting getting the "Documents and Settings" to move over to the "G" drive. So that when I want to load photographs from my camera to the computer it goes for C:Documents and SettingsMy NameMy DocumentsMy Pictures. Instead I would like it to go to G:Documents and SettingsMy NameMy DocumentsMy Pictures. Using Windows Explorer I changed the file name of "My Documents" to 'Windows XP old path My Documents" and then I was going to set up a new path to the "G" drive through Control Panel>Administrative Tools>Computer Managment>Disk Management.
However I noticed that when I clicked on Start in the bottom left hand corner and it puts up that little window that "My Documents" which was listed now had the new title 'Windows XP old path My Documents' which I believe means I haven't gotten to the proper place to change the main configuration for Documents and Settings. Long way of saying how do I change the basic configuration for where Document and Settings are stored to a new location.
This is a Windows XP sp3 domain connected PC with one specific user, which all of a sudden takes 2.5mins to log in to the domain, Where it used to take just about 20 seconds. Other users on the same PC is all OK 20sec login This is not the usual where it hangs at "applying computer settings" or "personal settings" it's after those two has passed that it just hangs for a couple of minutes.
All i get is the mouse pointer (not even hourglass) and the desktop wallpaper for about 2-3 minutes. When it finally logs in everything is as quick as you would expect that spec of PC to be (1,6ghz Sempron, 1gb RAM, 40gb IDE-100 HDD)
i've had problems with my computer background for months -.- and it's really getting on my nerves. i'd like to find a solution to my problem.. when i right click my desktop, click properties, click desktop.. and browse and find the photo i want to set, it looks fine in the preview but when i apply it, half of it is off the screen in the corner. i tried changing it to stretch, center, tile, i re sized the image to my exact desktop size, i also tried different resolutions and still no change! please if someone can help.. i've googled this Many Many times but none of the solutions worked for me, i've also tried multiple images... I'll post some screenshots now
View 13 Replies View RelatedAOL Broadband Checkup always hangs when I'm signed on. Computer Checkup works fine & will sign on automatically if needed. Not a major problem, I just want to get it fixed.
Windows XP (home), sp2 & all updates, Windows firewall. AOL 9, Platinum 2mb. Spybot S&D, AdAware SE Personal with latest updates, XSoftSpy with latest updates. Presario 2504EU Laptop.
For some reason my system keeps hanging when booting up on the windows splash screen, then when i try to start it in safe mode it hang on /System32/Drivers /mup.sys . The problem started when i switched the case of the computer due to the power button beeing fauty. There has been no update of hardware apart from the case.
View 3 Replies View RelatedI am having a problem with various workstations hanging when trying to log in. Sometimes after powering down and restarting it will log on successfully, other times it still hangs. This same issue is happening at several of our school campuses, each with their independent domain.
View 1 Replies View Relatedrecently XP hangs when i open anything to do with its properties (System Properties, Display Properties, System Config, Mouse & Keyboard Properties) Avast, MRT, Spybot has not found anything Trojan/Worm etc that could be the reason for this hanging.
View 4 Replies View RelatedThis rather novice computer user is looking for a checklist of steps to diagnose an issue with XP hanging up on boot started last night.Current system is 3 1/2+ years old - Graphics card upgraded 2 years ago - running XP SP3 for games and email.Booting computer - starts up no problem - on XP screen with dots moving across it freezes after about 10 seconds.On restart I tried the restart from Last Known Good Configuration - same hang up same dot location.I can boot into Save Mode and it comes up. I ran CC Cleaner again including registry. Actually I may have run CC Cleaner before the hand up booting.An links on a step by step process I can follow so as not to make a problem any bigger would be helpful.
View 1 Replies View RelatedI was on my computer, listening to music, and then all of a sudden, my sound just stopped. Totally. Checked the volume control and everything. I was obviously curious as to why, so for some reason, I opened up the task manager to take a look at what was running. It was then that I saw "loader.exe" and "iexplore.exe" running. I didn't have Internet Explorer open, and I've never seen loader.exe before. Naturally, I googled it and was informed that it was some sort of spyware/malware. I ran MalwareBytes-AntiMalware and the results came back clean. Still, I searched for "loader.exe" on my computer and deleted it, and its prefetch file. The EXE was in a temp folder.After doing all of that, I decided to reboot to see if my sound will come back. Much to my dismay, not only did my sound not come back, Windows XP ITSELF did not come back either. My computer restarts and does the whole Asus thing it does at the beginning, and then the screen goes black. I never end up at the boot screen.
View 3 Replies View RelatedMy system have a good configuration that AMD Athloan 64 X2 Dual Core Processor 6000+, 3.01 GHz, 2GB RAM (DDR II ), 640 GB SATA HDD. I am using Windows XP Service Pack 2. My softwares are common and simple like Adobe Photoshop, Abbey Fine Reader, MS office etc. But still my system hangs with regular intervals and maximum slow. I can't play even a simple game, can't see a film or even I can't browse the internet smoothly. Often I am getting error messages like explorer not responding. I have formatted my system many times. But still the problem persists. How can I resolve this problem?
View 14 Replies View RelatedI start up my computer and then after a few minutes later, my computer screen goes black and automatically reboots on itself. After reboots it somehow hangs on me before getting into the login page of xp accounts.
View 14 Replies View Related