my windows xp home edition hung and now shows a black screen everytime i start the computer. how do i cancel installation? do i have to access and the bios, and if so how do i do this
View 2 Replies
I got my new system.. its been working like a dream, a proper gaming behemoth!Having got my 22" monitor on friday, I decided that now was the time to give it an overclock and see how it would do I used Ntune (I know I know!) and it hung a couple of times during its mucking about with clock speeds, etc I went out to sort something out in the garden, came back in and the screen had gone black during another hang.I reset the computer and on boot up windows would start up with the same black screen.
View 7 Replies View RelatedI am using a laptop I am not very familar wth but it has been working fine for a few years until recently whenever I turn it on it gives me choices to start normally or safe mode, and whichever I choose, starting normally the loading screen loads infintely or loading the required drivers for safe mode stalls after Mup.sys. I have looked around and tried to boot from the winxp cd to attempt a repair console but as soon as I switch on the computer it almost immediately goes to the safe mode selection screen after flashing Toshiba for a few seconds, and from here I can't do anything. I can't get into BIOS, or bypass anything. There might be a quick keyboard command I am not aware of but I seem to be stuck in a loop. The computer is a Toshiba Protege A100.
View 5 Replies View RelatedPlease help. I have upgraded a machine from 98 to XP pro. Now on start up, the pc hangs/freezes on the windows XP screen, the one with the blue scrollong bar at the bottom.
View 1 Replies View RelatedAfter buying and installing the new hardware i'm now having some issues. Everything was fine for weeks but now sometimes i get an error message. This is the 2nd time this has happened. Everything starts up as per normal but once it comes to the Windows screens (desktop) i get a blue screen with the error message: So i pretty much need to restart the pc and it goes back to normal. All hardware and software has been checked time and time again. All seems to be ok. Bar the dvd drive. The dvd drive doesn't let me access it, however if i put a dvd, audio or data cd in then autoplay takes over and asks if i want to play it or whatever. But if i want to open it by double clicking or selecting open after right-clicking then it doesn't allow it. I get the error message: d: not accssible. Incorrect function.
View 1 Replies View RelatedMy PC has recently started hanging during startup. It usually happens before the Windows XP logo appears. The startup process just stops, the screen stays black, the hard disk drive goes quiet and the activity light stays on (rather than the normal flickering).All I can do when this happens is hold down the power button until the power goes off.Also, when it does startup properly, after logging into XP it takes an unusually long time to load the settings,startup programs, etc and sometimes some of the normal system tray icons dont appear at all
View 14 Replies View RelatedMy computer shutdown and on boot up it hangs at the black screen showing the white bar at the bottom. I have Windows 98 and 2000 on my computer and neither will boot up from C:, CDROM, or StartUp/BootUp disks. When I try to boot up from the Windows 2000 boot up disk it sometimes will not get passed the blue screen showing 'Windows 2000 setup. Once or twice it has shown some functions in the bar at the bottom of the page. I have tried to boot up using Windows 98 start up disk but most times it hangs at C:. Last night it did open Windows 98 but would not let me reinstall 2000 or do a repair. It now is hanging in both OS. I am told it could be my memory...but how do I check? Upon start up my memory check shows all is okay. I have ran the utility disk for my hard drive and it says all is okay. Before I invest in new memory is there anything else I should check or try? My computer is older and the memory is quite expensive.
View 8 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
I have Windows XP SP2 and the Wallpaper Changer. When I boot up it shows me the configuration screen. I don't want to see the configuration screen, I just want it to change my wallpaper. Wallpaper never used to do this but when IT took my computer to fix it the removed Wallpaper Changer (they thought it might be causing a problem but it wasn't) so I am confident that there is some way to stop this annoying behavior.
View 1 Replies View RelatedHe is using XP Professional. For last month at the startup sometimes PC start up ok, but before XP logo comes, the whole screen goes black and only one flashing dash at the top left corner of the screen. Turinign on and off the PC couple of time make the PC startup ok and every thing works fine. His automatic update is on and is getting all the updates from Microsoft auomatically.
View 7 Replies View RelatedStarted computer it went black after startup, shortly after the desktop was showing. The led on my screen acted like it didn't have any connection to the computer. I then tried to boot in fail safe mode to scan the computer for viruses, no problems at all. No viruses found either. After that i tried to start it normal mode again this time the screen became distorted with the my background picture as palette. After that i tried to boot in VGA mode and that worked as well perfectly. I really don't know what can be causing this.
View 4 Replies View Relatedso heres the story my laptop took forever to boot up after about a week i got it so i sent it in a month later i received it "fixed" with a new harddrive. i was extremely excited threw in the battery and after about 15 minutes i finally was in. 15 is way longer then the bootup times ive seen on other hp mini 110 laptops on Internet.
View 8 Replies View RelatedI justr turned on my pc this morning and after being asked whether to boot from last known good or from normal, the screen goes blue/black and just stays like that and nothing happens hope its nothing serious. I don't have a backup cd.
View 1 Replies View RelatedSo My roommate's computer just decided to up and die on us today. She's been running XP all along, and then today she woke up, tried to start it up, and it just stopped working.The PC starts, goes to the
black startup screen where I can hit del. to enter setup then to another black screen that cycles through the list and the last thing is says is 'verifying dmi pool data' Then the little white bar scrolls across the bottom from left to right Then the Windows screen comes up and the little blue progress dots cycle through
On startup it will load through the xp logo then goes to a black screen with cursor and freezes. I have tried booting to safe mode with no luck, put drive in external enclosure to reload drivers no luck, tried fixmbr no luck, tried in different case no luck.
View 6 Replies View RelatedI ran into a problem today with my XP system. While browsing the web, the graphics on my screen seemed to go crazy. There were all different colors of what appeared to be little tilde's (the character) on my screen. They generally were present where there had been a window that was open, and they would mostly be confined to the place of that window. e.g., if I opened the start menu and closed it there would be a patch of disfigured color in the rectangle where it was.
Anyway, I rebooted my system thinking that would fix it and saw a bunch of disfigured characters on my BIOS screen and while it booted in general (I included a screenshot of the character disfiguration at this point). It gets through to the Windows splash screen with the loading bar, and from there the screen goes black. The system and monitor are still on. I had the latest video drivers for my card.
I have a PC that sometimes gives me a black error screen after startup The screen says.Sometimes I also get a Blue screen with an error message.. Is this the blue screen of death? This message reads.Any further information you might need to help me.
View 7 Replies View RelatedI have a Dell Latitude D400 laptop. After reloading windows I get the Windows startup screen and then I just get a black screen...Windows will not come up. Anyone know what I can do?? I get the mouse and can move it around but no windows screen. I have done the diagnoics test and found a DST Short Test failed with code 1000-0146 is this why Windows will not load? Is my harddrive bad you think? It reloads Windows fine but Windows will not come up after install? Again all I get is a black screen with the mouse to move around.
View 4 Replies View RelatedThe screen going black and the computer beeping consistently untill turned off. The screen showing evenly spaced vertical white lines on a black screen. Showing a bluescreen (I can't remember the error messege but will make a note if it happens again). Not booting up correctly, with a messege displayed about inserting system disk or removing disk from the floppy drive though nothing is inserted. Sometimes the computer will switch on fine and will not act up at all, but much more often now I will get at least one of these errors each time I try to use the computer, if not several in succession.
View 3 Replies View RelatedI'm having a slow start-up problem, which never used to be a problem. I am running Windows XP SP2. When I startup or restart, the screen goes to black for a few seconds before going to the Log On Page. Once it goes to the log on page, I click my user name. It then takes anywhere from 3 to 5 minutes to load to the state of use. Within one minute from clicking my username, I am brought to Windows Screen, but my background and my icons do not load for another 2 or 3 minutes. During this time period, if I scroll over Start or any other command buttons, my mouse turns into the hour glass. I am receiving no error messages, and once my computer loads completely it seems to be working fine. Though, I think it is running slower than normal in general.
View 4 Replies View RelatedI dont know what is going on. I originally was trying to get my webcam to work, it wouldn't so i was going through troubleshooting procedures according to its help menu, and it asked me to unplug all usb devices and replug the webcam only, well i wasn't thinking and I just unplugged the external hardrive and the webcam at the same time without "stopping" it. So then it gaev me a message saying it needed to reboot to complete its update or something i wasn't paying attention cause i thought it just needed to reboot for the webcam so i did, then when i rebooted it would show the COMPAQ screen with the three options at the bottom(ESC for boot menu, F1 for BIOS(Ithink) and F10 for recovery, well then it would go immediately to a black screen w/ a white cursor in top left corner, It would idle there permenantly. I would have to ctrl+alt+del to get it to go back and finally i was looking for a way to use my recovery tools cd, that didn't work at first but then it finally came up and said it could do a recovery where it wouldn't delete my files but it would restore the rest to orignal state, so i went ahead and chose that option. It finished and said to reboot. I did, then it still gets stuck at that black screen, doesn't even show the WINXP screen.so i was looking for a way to figure this out and i went to the ESC menu this is what you see there.
View 1 Replies View RelatedUpon turning on my PC, the I get as far as the Windows icon showing the system booting up, then an hour glass, then back to a black screen as the computer automatically reboots and begins the cycle again. I've done some research online and found others have worked on this problem with check disk commands and safe mode start ups. The problem is, even when started in safe mode, it reboots. I am not able to get to a command prompt at this point to try anything!
The machine is an HP pavillion 513n running windows XP. XP came installed when this desktop was purchased new 2 years ago. This particular computer is not even used to access the internet so I have a hard time believing its virus related. I've checked that the power supply is secure and the fan seems to be operating as usual. The only change I made to any software or systems today was to add several legitimate fonts to the control panel.
There was recently a power outage in my home in which my computer has a forced shutdown upon loss of power while already in Windows (at the normal desktop screen). When I got power again I found start up o be longer than usual, and when the XP load screen was done the computer immediatly went to a black screen instead of moving to the normal login screen. There was video and the monitor was on, so I know the video card was functioning among everything else
I believe Windows encountered a few problems upon the quick shutdown prior to the power outage. Pretty much I tried everything I knew to try, using F8 at windows selection screen, and going to startup through windows with the most recent functioning configuration- this yielded the same problem unfortunately. I finally started up with safe mode, quite a few drivers loaded, but all in all the processes halted at a specific driver ( dont think this has any specific significance) mud.sys.
I recently bought a second hand computer. It originally had vista ultimate installed but i was experiencing system freezes during computer game play on games that aren't too high end. I guessed that it might have been an incompatible driver after having read on the internet about the problems people were having with vista/64Bit compatibility.
View 8 Replies View RelatedI have a Dell Dimension 4550 desktop running Windows XP, SP3. I have 2 problems. BSOD on waking from Standby mode about 80% of the time - must reboot. Error message is: Kernel_Stack_Inpage_Error. Codes are: Stop: 0x00000077, (0xc000000E, 0xc000000E, 0x00000000, 0x05DB7000). Beginning dump of physical memory.This has been going on for a couple of months. When it first happened I could think of no new software that I had added recently. I'm also getting a black screen on startup about 70% of the time. Messages: Primary hard disk drive 0 not found. Strike F1 key to continue, F2 to run Setup Utility. When I hit F1 key, the error message just repeats endlessly, have to reboot to get out.
View 4 Replies View Relatedas above, pentium 4 windoiws xp black screen on startup cannot see bios menu or get to safe mode.
View 1 Replies View RelatedI just joined here and Im having a really abd problem with my computer. The specs that i know for sure) are:I booted my comp a few dyas ago and out of nowhere I get a BSOD before that screen with Windows XP comes up. I say to myself "ok, maybe its just one time" and reboot. I get it yet again and reboot. I finally get to the windows log in screen and I get ANOTHER BSOD after it finished loading. Restarted again, worked fine. I analyze my minidumps and it said the most probably cause of these crashes was hardware. At this point I recall a computer technician saying the capacitators on my mobo were bursting, but this was a good 8 months ago, so Im not sure if its FINALLY giving out or if my RAM thats failing.
View 3 Replies View RelatedI have a Toshiba Satellite A15-S129 that i bought a couple of years ago. When i go to start up, it shows the windows xp loading screen. But it then flashes a black then blue screen for a split second. The computer shuts down then starts up again and does the same thing, over and over.
View 1 Replies View Relatedmy computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
I am currently running XP on my system. About three days ago, my system suddenly started taking longer to boot. The extra boot time comes in the form of a black screen with a flashing cursor in the top left, where my system does not appear to be doing anything. This screen appears immediately before the Windows XP loading screen. I have tried Tweak XP utilities to try and speed up my startup. Failing that, I tried a system restore to a few days prior to this strange occurrance. Every time I try to run system restore, however, I am confronted with an error upon startup that tells me that system restore was unsuccessful. I have tried a variety of system restore dates, and all have been unsuccessful. I have tried sweeps with Spysweeper and Norton, and neither have brought any more insight into this problem.
View 11 Replies View RelatedI've had this computer working for quite a while, at least a year, and I reinstalled XP a few days ago to rid the computer of spyware, etc. It installed with no errors, and worked fine for a few days after the reinstall. Last night I shut it down, started it back up this morning and it hangs on the Windows XP loading screen, the green bar keeps going through but it never boots. The same thing happens when I boot with the last good configuration that worked. When I boot in safe mode it hangs while it loads the safe mode files, the last one is Mup.exe, Mup.dll, or something that starts with Mup. MemTest86 shows no errors, so I guess its not the memory, and I don't know why anything would just stop working. I didn't install any new hardware, software, or drivers right before I shutdown last night. Here are my computer specs: Asus K8V SE Deluxe Motherboard. Athlon 64 3200+ CPU. 1GB (2 x 512MB) PC3200 Kingston Value RAM (Non-ECC). 250GB SATA Hard Drive (It's either Maxtor or Seagate, if you really need to know which I can check).ATI X800XT Video Card. Windows XP with the SP1 CD, but I downloaded and installed SP2 and it was running fine with SP2 for a few days.
View 10 Replies View Related
