PC Sometimes Gives A Black Error Screen After Startup
Apr 28, 2008
I have a PC that sometimes gives me a black error screen after startup The screen says.Sometimes I also get a Blue screen with an error message.. Is this the blue screen of death? This message reads.Any further information you might need to help me.
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
He is using XP Professional. For last month at the startup sometimes PC start up ok, but before XP logo comes, the whole screen goes black and only one flashing dash at the top left corner of the screen. Turinign on and off the PC couple of time make the PC startup ok and every thing works fine. His automatic update is on and is getting all the updates from Microsoft auomatically.
Started computer it went black after startup, shortly after the desktop was showing. The led on my screen acted like it didn't have any connection to the computer. I then tried to boot in fail safe mode to scan the computer for viruses, no problems at all. No viruses found either. After that i tried to start it normal mode again this time the screen became distorted with the my background picture as palette. After that i tried to boot in VGA mode and that worked as well perfectly. I really don't know what can be causing this.
so heres the story my laptop took forever to boot up after about a week i got it so i sent it in a month later i received it "fixed" with a new harddrive. i was extremely excited threw in the battery and after about 15 minutes i finally was in. 15 is way longer then the bootup times ive seen on other hp mini 110 laptops on Internet.
I justr turned on my pc this morning and after being asked whether to boot from last known good or from normal, the screen goes blue/black and just stays like that and nothing happens hope its nothing serious. I don't have a backup cd.
So My roommate's computer just decided to up and die on us today. She's been running XP all along, and then today she woke up, tried to start it up, and it just stopped working.The PC starts, goes to the black startup screen where I can hit del. to enter setup then to another black screen that cycles through the list and the last thing is says is 'verifying dmi pool data' Then the little white bar scrolls across the bottom from left to right Then the Windows screen comes up and the little blue progress dots cycle through
On startup it will load through the xp logo then goes to a black screen with cursor and freezes. I have tried booting to safe mode with no luck, put drive in external enclosure to reload drivers no luck, tried fixmbr no luck, tried in different case no luck.
I ran into a problem today with my XP system. While browsing the web, the graphics on my screen seemed to go crazy. There were all different colors of what appeared to be little tilde's (the character) on my screen. They generally were present where there had been a window that was open, and they would mostly be confined to the place of that window. e.g., if I opened the start menu and closed it there would be a patch of disfigured color in the rectangle where it was.
Anyway, I rebooted my system thinking that would fix it and saw a bunch of disfigured characters on my BIOS screen and while it booted in general (I included a screenshot of the character disfiguration at this point). It gets through to the Windows splash screen with the loading bar, and from there the screen goes black. The system and monitor are still on. I had the latest video drivers for my card.
I have a Dell Latitude D400 laptop. After reloading windows I get the Windows startup screen and then I just get a black screen...Windows will not come up. Anyone know what I can do?? I get the mouse and can move it around but no windows screen. I have done the diagnoics test and found a DST Short Test failed with code 1000-0146 is this why Windows will not load? Is my harddrive bad you think? It reloads Windows fine but Windows will not come up after install? Again all I get is a black screen with the mouse to move around.
The screen going black and the computer beeping consistently untill turned off. The screen showing evenly spaced vertical white lines on a black screen. Showing a bluescreen (I can't remember the error messege but will make a note if it happens again). Not booting up correctly, with a messege displayed about inserting system disk or removing disk from the floppy drive though nothing is inserted. Sometimes the computer will switch on fine and will not act up at all, but much more often now I will get at least one of these errors each time I try to use the computer, if not several in succession.
I'm having a slow start-up problem, which never used to be a problem. I am running Windows XP SP2. When I startup or restart, the screen goes to black for a few seconds before going to the Log On Page. Once it goes to the log on page, I click my user name. It then takes anywhere from 3 to 5 minutes to load to the state of use. Within one minute from clicking my username, I am brought to Windows Screen, but my background and my icons do not load for another 2 or 3 minutes. During this time period, if I scroll over Start or any other command buttons, my mouse turns into the hour glass. I am receiving no error messages, and once my computer loads completely it seems to be working fine. Though, I think it is running slower than normal in general.
I dont know what is going on. I originally was trying to get my webcam to work, it wouldn't so i was going through troubleshooting procedures according to its help menu, and it asked me to unplug all usb devices and replug the webcam only, well i wasn't thinking and I just unplugged the external hardrive and the webcam at the same time without "stopping" it. So then it gaev me a message saying it needed to reboot to complete its update or something i wasn't paying attention cause i thought it just needed to reboot for the webcam so i did, then when i rebooted it would show the COMPAQ screen with the three options at the bottom(ESC for boot menu, F1 for BIOS(Ithink) and F10 for recovery, well then it would go immediately to a black screen w/ a white cursor in top left corner, It would idle there permenantly. I would have to ctrl+alt+del to get it to go back and finally i was looking for a way to use my recovery tools cd, that didn't work at first but then it finally came up and said it could do a recovery where it wouldn't delete my files but it would restore the rest to orignal state, so i went ahead and chose that option. It finished and said to reboot. I did, then it still gets stuck at that black screen, doesn't even show the WINXP screen.so i was looking for a way to figure this out and i went to the ESC menu this is what you see there.
Upon turning on my PC, the I get as far as the Windows icon showing the system booting up, then an hour glass, then back to a black screen as the computer automatically reboots and begins the cycle again. I've done some research online and found others have worked on this problem with check disk commands and safe mode start ups. The problem is, even when started in safe mode, it reboots. I am not able to get to a command prompt at this point to try anything!
The machine is an HP pavillion 513n running windows XP. XP came installed when this desktop was purchased new 2 years ago. This particular computer is not even used to access the internet so I have a hard time believing its virus related. I've checked that the power supply is secure and the fan seems to be operating as usual. The only change I made to any software or systems today was to add several legitimate fonts to the control panel.
There was recently a power outage in my home in which my computer has a forced shutdown upon loss of power while already in Windows (at the normal desktop screen). When I got power again I found start up o be longer than usual, and when the XP load screen was done the computer immediatly went to a black screen instead of moving to the normal login screen. There was video and the monitor was on, so I know the video card was functioning among everything else
I believe Windows encountered a few problems upon the quick shutdown prior to the power outage. Pretty much I tried everything I knew to try, using F8 at windows selection screen, and going to startup through windows with the most recent functioning configuration- this yielded the same problem unfortunately. I finally started up with safe mode, quite a few drivers loaded, but all in all the processes halted at a specific driver ( dont think this has any specific significance) mud.sys.
I recently bought a second hand computer. It originally had vista ultimate installed but i was experiencing system freezes during computer game play on games that aren't too high end. I guessed that it might have been an incompatible driver after having read on the internet about the problems people were having with vista/64Bit compatibility.
my windows xp home edition hung and now shows a black screen everytime i start the computer. how do i cancel installation? do i have to access and the bios, and if so how do i do this
I have a Dell Dimension 4550 desktop running Windows XP, SP3. I have 2 problems. BSOD on waking from Standby mode about 80% of the time - must reboot. Error message is: Kernel_Stack_Inpage_Error. Codes are: Stop: 0x00000077, (0xc000000E, 0xc000000E, 0x00000000, 0x05DB7000). Beginning dump of physical memory.This has been going on for a couple of months. When it first happened I could think of no new software that I had added recently. I'm also getting a black screen on startup about 70% of the time. Messages: Primary hard disk drive 0 not found. Strike F1 key to continue, F2 to run Setup Utility. When I hit F1 key, the error message just repeats endlessly, have to reboot to get out.
I just joined here and Im having a really abd problem with my computer. The specs that i know for sure) are:I booted my comp a few dyas ago and out of nowhere I get a BSOD before that screen with Windows XP comes up. I say to myself "ok, maybe its just one time" and reboot. I get it yet again and reboot. I finally get to the windows log in screen and I get ANOTHER BSOD after it finished loading. Restarted again, worked fine. I analyze my minidumps and it said the most probably cause of these crashes was hardware. At this point I recall a computer technician saying the capacitators on my mobo were bursting, but this was a good 8 months ago, so Im not sure if its FINALLY giving out or if my RAM thats failing.
I have a Toshiba Satellite A15-S129 that i bought a couple of years ago. When i go to start up, it shows the windows xp loading screen. But it then flashes a black then blue screen for a split second. The computer shuts down then starts up again and does the same thing, over and over.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
When starting my computer, I have started getting a "Hard Drive Not Found" error on the black screen just as the pc starts booting up. I've not written down all the details, but I see the MAC address displayed and a cursor blinks just after the letters DHCP, there is something about "boot filename not received", then "Hard Drive not found" and then it defaults to the Windows boot screen and will boot up fine. The pc seems to run normal once up...but, I'm somewhat concerned about a "Hard Drive Not Found" error. It just doesn't sound good. I'm going to try to get more specifics as to what I'm seeing on the boot screens, but wondered if anyone here might have some suggestions as to what my issue is?
My pc specs should show in my signature. Also, I recently upgraded my graphics card, but that's the only hardware I've been playing with lately. Don't know if that would make any difference because I wasn't getting any trouble until now and that graphics card has been in about a week already.
i have a dell dimension 310 with Window xp. when started the first screen is black and says floppy disk seek error, i dont even have a floppy drive. press f1 and will go to sign on screen, you press the user and xp pops up for a second and back to sign on screen.it wont stay open.
Recently, my computer would boot up and there would be double blue lines flickering on the screen. Sometimes, there would be a box of flashing lines that followed the cursor. Eventually, my computer would stop booting up, and I would get the blue screen with the following information: Page fault in nonpaged area Stop: 0x00000050 (0x9A4878F4, 0x00000000, 0x8052B6CC, 0x00000000)From what I have read, this could be a software or hardware problem. I downloaded Memtest and ran that many times over long periods, but it did not find errors with my RAM (or at least what it could test). Reading that it could be something in the registry that is no longer valid or corrupted, I downloaded CCleaner, ran it, and fixed the errors. Still no resolution to the problem. I have scanned for viruses and malware using Symantic Antivirus, Malwarebytes Anti-Malware, and SUPER Antispyware, but it found nothing out of the ordinary. I am not sure if my registry is corrupted or perhaps the RAM on my video card is at fault, but the laptop starts up fine in Safe Mode and works well (making me think it is not the video/graphics card). I would like to know what I could do to fix my problem short of wiping out my system and reinstalling the operating system.
I'm getting a BSOD with the following Stop Error DRIVER_IRQL_NOT_LESS_OF_EQUAL *** STOP:0x000000D1(0x00000018,0x00000002,0x00000000, 0xF72BD25F) iastor.sys - Adress F72BD25F base at F72AE000 DateStamp 42b2df42 This happens every time I start up and also I am unable to boot into Safe Mode as it is getting hung on whatever file is after Mup.sys.My plan was to go into safe mode and update iastor.sys to a newer version but I cant. I also find it stange that this file is an issue as I only have a single hard drive and I was under the impression that this file had something to do with RAID.
2 months ago I ordered system from Cyberpower PC and it was shipped a week later.Set it all up,formatted Windows XP Home Edition and got it running. Shortly there after, I started blue screening and it seemed RAM related, so I swapped the sticks and it seemed I would only BSOD with one of the sticks, so I called the company, shipped it back, and got a new stick.
Then I started to BSOD again with the error message of IRQL_LESS_OR_NOT_EQUAL and then 0x0000000A (0x0000F78A, 0x0000002, 0x0000001, 0x806E4A8F), and this particular error would only occur while I was playing World of Warcraft. So first I pulled the new stick of RAM and tried playing... and everything went fine for a day, and then I BSOD'd again, same error
I'm using Windows XP SP2 on this computer, and last night the computer froze while waking up (I don't "shut down" every time, i hibernate the system). I restarted and windows froze again on the startup screen. I restarted in safe mode and ran a disk check (scheduled it for next restart). The system booted up after the disk check completed (it said it found and fixed errors). However, it was dead slow,. I have avira antivir personal(updated with the latest definitions), I ran a full system scan, and it found nothing but a "hidden object". Here's the report:-
Avira AntiVir Personal Report file date: Wednesday, May 19, 2010 02:13 Scanning for 2118977 virus strains and unwanted programs. The program is running as an unrestricted full version. Online services are available:..............
i have a compaq deskpro which runs on xp pro this morning, my mother started up the computer and realised it would get past the stage of the windows xp logo when the Xp logo appears, a few seconds later, a blue screen with an error flashes and reboots but i am unable to read what the blue screen says but the pc keeps rebooting and rebooting i have accessed the recovery console from the boot cd but am i able to fix the error using this or will i have to format the pc?
After buying and installing the new hardware i'm now having some issues. Everything was fine for weeks but now sometimes i get an error message. This is the 2nd time this has happened. Everything starts up as per normal but once it comes to the Windows screens (desktop) i get a blue screen with the error message: So i pretty much need to restart the pc and it goes back to normal. All hardware and software has been checked time and time again. All seems to be ok. Bar the dvd drive. The dvd drive doesn't let me access it, however if i put a dvd, audio or data cd in then autoplay takes over and asks if i want to play it or whatever. But if i want to open it by double clicking or selecting open after right-clicking then it doesn't allow it. I get the error message: d: not accssible. Incorrect function.
My granddaughter downloaded some kind of game on my computer yesterday she said that while she was playing a box came up and the screen went blue well it has been blue ever since the error Disable or uninstall any anitvirus disk defragmentation or back utilities Check your hard drive configuation and check for updated drivers Run chksk/f to check for hard drive corruption and then restart your computer techincal info stop:oxooooo24(oxoo190203,0x81364008 ,oxcooo102 ,oxooooooo)