Each time I re-boot my Windows XP sp2, I get an error message on a blue screen: "AU program not found Skipping AUTOCHK". In the control panel, the Security Center shows Automatic Updates is ON. Doing a support search on the Microsoft website, a Repair Reinstall of XP will cause problem's in- it- self.
View 1 RepliesI got this blue screen error message which came up when I was usingmy PC.The details are: *** STOP: 0X00000001 (0X005C007F, 0X00000002, 0X00000000, 0XF2E312AC)*** LF30XQ.SYS - address F2E312AC base at F2E2C000, DateStamp 403C6159 beginning dump of physical memory Physical memory dump complete.It also said to turn off BIOS Memory Caching or shadowing. There is only Video BIOS Caching enabled on BIOS. No other shadowing or caching is stated anywhere.
View 1 Replies View RelatedThis is kind of a long one, so please bear with me. In the last week I've been getting a lot of pop ups (almost every time i clicked a link or visited a new site) which i never used to get before. Many of them were things saying my computer was at risk and i should download such and such software, but i didn't know if they were legit so i didn't do it.Then one morning a couple days ago i woke up with the computer running the windows loading page. It took me to the password screen, i entered my password and windows started. But then once all the programs had loaded, it flashed a blue screen error, too quick to read, and then went black. Then it started loading windows again and took me back the password screen. I logged on and the same thing kept happening over and over.I started it in Safe Mode and did a full scan with my virus protection software (Symantec). It found six threats and i deleted them all. Restarted the computer but the same thing happened. I tried the disk defragmenter in Safe Mode but that didn't work either.
Finally i changed the System Config Utility in Safe Mode to diagnostic which allowed me to open windows outside of Safe Mode, but not use any programs. So i went back to the system config and turned off all the programs that i could recognize as unnecessary (AIM, Kodak, winAmp, etc) and restarted. This time windows started fine and stayed up for awhile. Just to be on the safe side i disabled the automatic restart so that if it happened again i could write down the blue screen error. After about a half hour of working fine it went to the blue screen error again.
Trying to help my daughter with her computer. Every once in a while (sometime twice in a day, sometime not for several days in a row) she hears her computer rebooting. Even when she has nothing open and not even using it - just a desktop open. Created a system restore point before started all this. The computer reboots and gives the following error message: "The System has recovered from a serious error", then she can click Send to Microsoft, or don't send. She clicks don't send and everything words just fine, her applications run fine, email and Internet work fine. This doesn't happen very often, but something is not right. Not much to gone on but that's all that happens.The computer is nice and fast, boots up fast, everything runs nice and fast. Internet and email work fine.This started a few months ago and she can't remember doing anything that would cause it to start. She has not installed any software or hardware in over a year or so. I did a complete backup right away so her files are backed up and safe.
Thought it sounded like a heat issue so I opened the case and she had it very, very clean. Fan and heatsink very clean and fan working fine as well as the other fan in the case. I checked the hard drive cables (SATA 250 gig HD) and they were nice and tight. Reseated the memory modules just in case one crept lose. check CD/DVD drive cable and it was tight. Cleaned out her temporary Internet (cache) files.Next, I clicked on My Computer then highlighted the C: drive and right clicked the C: drive and selected Properties. Then selected Tools and was going to select Defrag button but it was greyed out and said "No defragment tool is installed. I then opened the Control Panel and click the Add/Remove programs icon and once that opened I selected the Open Windows Components and it opened fine, but I couldn't find anywhere in there to install the Windows Defragment program. Am I looking in the right place for this?
My friend goes to college and is home for the holidays and asked me if I could find out what is wrong with his laptop.First you turn it on and there is a constant clciking noise but that I don't think is the main problem. when you turn it on it doesnt boot it goes right to a black screen with whitle letters and says this Reboot and select proper boot device or insert boot media in selected boot device and press a key Could I person put in an xp pro system disk and boot with that? He isn't home right now and I don't know if it is xp home or pro but I have a pro disk, it has not got a floppy drive so can't use floppies to boot with, So can I set the BIOS to boot from the cd-rom and try the xp pro disk? and if so what do I do after it boots? or can I click on I think it is F10 when starting and see if I can get to system recovery? and if so what do I do after I get there?
View 7 Replies View RelatedUsing XP Home Edition. For awhile it has been popping up Windows-No Disk "There is no disk in the drive. Please insert disk into drive." When I cancel, it pops up again anything from 3-8 times. I keep it on all the time. The last two mornings I have found the computer shut down. When I boot it up, it said, "Windows has recovered from a serious error." After sign-in, still having popups No Disk. Have checked disk, defragged, and am doing a clean disk. Any ideas on what this is or how to get rid of the message?
View 11 Replies View RelatedI'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
View 2 Replies View RelatedEvery time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
View 6 Replies View RelatedI went to bed 2 nights ago with a statistical program running on my computer. I woke up the next day to find a black screen with a small window with an error message. It said: "lsass.exe - System Error" "Object Name not found." When I click OK, the computer tries to restart.it shuts down, but then when trying to reboot it comes back to the black screen with the error message.
View 1 Replies View Relateda message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
View 1 Replies View RelatedI have a Dell Inspirion laptop and have formated the HD and removed the partions. Have tried booting from a USB HD and have also tried another burned disk. No change will not install.
View 1 Replies View RelatedMan, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
When I'm trying to start up Windows XP Home Edition I receive an error box without an error message, I can just click YES or NO. Neither option let's me continue. When starting up in Safe Mode, everything works fine.
View 2 Replies View RelatedThe message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was 'cih333@suddenlink.net'. Subject 'Batman!', Account: 'pop.suddenlink.net', Server: 'smtp.suddenlink.net', Protocol: SMTP, Server Response: '553 Authentication is required to send mail as <cih333@suddenlink.net>', Port: 25, Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC78
View 2 Replies View RelatedI keep getting this error message when I boot. The entire message says, "windows explorer has encountered an error and needs to close." When I close the box, i lose my desktop, and can't run a bunch of programs, including the "run" option. I am able to run my browsers and get on the web. I did do a system restore, and it worked at first, but then on the next reboot, i got the error message again. Did another system restore, same thing.
View 17 Replies View RelatedMy computer started to crash a bunch, so I reloaded windows. Now it does it all the time. It reboots randomly and does not record anything in the error log. It did however just give me a stop error. The error was 0x0000007E (0xC00001D, 0x804FFDB7, 0xF789E678, 0xF789E374)
View 2 Replies View Relatedi have a customer that is getting a stop error when they boot the pc. the error flashes too quickly on the screen to catch it. i know there's a registry entry somewhere that i can change that will change the reboot automatically setting. does anyone know what it is? there should also be a log file that will also show me the what the stop is, but everything i see is all binary data.
View 8 Replies View RelatedI attached my xp drive as a slave to my 2000 pro drive and booted. It checked my xp drive and then started to truncate everything. I now cannot reboot my xp drive. I tried using xp cd to repair but it says I can't due to error on partition, drive full etc. I have tried my friends partition software but it finds no errors. When I use his xp drive to see my xp drive, it says it is unreadable. Is there something out there to repair my truncated files? Is this fixable or is formating my only option. I am desperate to retain my xp drive data. Using parition magic 8, it shows my xp drive as a type 07 and my 2000 as a FAT drive.
View 1 Replies View RelatedWhen i logon my pc reboot it self. A message comes up. PC recovered from a critical error.
View 1 Replies View Relatedtoshiba laptop keeps rebooting i have a toshiba satellite a100/a105 series laptop. it was working fine until i hit a link from a Internet video. i try to log on but it keeps rebooting indicating the following message:"we apologize for the inconvenience, but windows did not start successfully. a recent hardware or software change might have caused this.if your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose last known good configuration to revert to the most recent settings that worked.if a previous startup attempt was interrupted due to a power failure or because the power or reset button was pressed , or if you aren't sure what cuased the problem, choose start windows normally.
View 6 Replies View RelatedIt has 2 drives and the boot drive is split into 2 partitions. I was 'upgrading' his XP (was on C: volume) to XP-MCE and there was a failure, I decided to just do a clean install onto that partition. I deleted the old boot partition and started installing XP-MCE into the now unallocated space. After the reboot to continue installation it stops after post with "Disk error" and "Press any key to restart" messages.
If I boot to the install disk again it shows the storage space as C: and the new installation as D: (opposite of pre-reinstall). I retried with the 2nd SATA drive disconnected and it's the same every time.I can't reformat the whole drive; the storage partition has all the backup data that I saved from the original XP installation.
Okay every time i start my pc i get this error. I insert my gigabyte system cd with gives me option to backup or reboot.Back up = error dont have enough hard disk space reboot = nothing the same error as in the title
View 1 Replies View RelatedI have a friend who has a Dell Dimension 2400. She had a blue screen error with the following parameters 0x00000050 (0xfa3bedeb, 0x00000000, 0xfa3beded, 0x00000000). She was able to reboot at the time of the error but now she's getting a black screen and can not do anything at all.
View 8 Replies View RelatedHow to Remove cn_api60.dll?
View 7 Replies View RelatedI left my computer on for about 3 hours, when I returned the screen was black with the a message First time this happened INVALID System Disk Replace Disk and then press any key There is or was no 3 1/2 floppy disk in the computer. Every time I hit any key nothing would happen. When I would reboot I would get to the same screen with the same message and nothing would happen. Then I would reboot again and when that screen would come our I would insert a 3 1/2 Floppy into the computer and the computer would start up. So now the only time I can get the computer to start up I must insert a 3 1/2 floppy.
View 1 Replies View RelatedBuilt my computer about 1 1/2 months ago, have been having various random reboots at times when I seem to be running a lot of stuff. Most notably crashes during memory intensive games. I sent for replacement ram, even though memtest gave me no errors after 7 passes. I had an Audigy 2 that was in one of the PCI slots, but I removed it and uninstalled all the drivers and apps. I also uninstalled my video drivers, deleted, and reinstalled to updated drivers. Some Errors picked from Event Viewer: (occured last night while playing World of Warcraft)
Error code 10000050, parameter1 e77b8000, parameter2 00000000, parameter3 bf9d59b4, parameter4 00000001.
---------------------------------------------
*Error code 10000050, parameter1 991b272e, parameter2 00000000, parameter3 80529a84, parameter4 00000000.
----------------------------------------------
*An error was detected on device DeviceHarddisk0D during a paging operation.
Every time I reboot a setup window appears. When I click the next button an error say can not install on windows NT.
View 5 Replies View Relatedhi i'm very untechy, i am getting an rpc server error and cannot figure out how to fix it. it keeps rebooting my system. so it's in a continual state of shutdown and reboot. RPC Server Unavailable, hres: 0x800706BA Register Class Objects Fail when i try to do anything it shuts down before i can complete it.. and i try to type command, but i have to go through ctrl/alt/delete to get to the run function because the taskbar isn't there?
View 7 Replies View RelatedI'll try to remember, to the best of my ability, the sequence of events...Suffice it to say that I downloaded and tried to install something I shouldn't have. I Immediately tried to get out of the errors from AVG (free version) and stop the install. All seems good, then IE keeps opening to bogus ad sites. I realize I've got something. AVG and AdAware both fail in removing this Win32Trojan.tdss (I think AVG gave me this description). AVG tells me to reboot to remove it properly. Reboot throws me into "can't verify this installation of Windows". Boot in safe mode work, then I get the same error on reboot...even in safe mode.
I don't have the original Windows CD (separated from husband and software at the same time; cannot find any software now), but it's a Dell and it came with Windows XP Home (product key on box), but I installed XP Pro instead. Don't know what product key was used or how to get it.....
Error Code 0F00:0244
Error Code 0F00:1A44
Msg: Block 6442285....
Computer that has Windows XP and I've started getting these annoying error messages that "Internet Explorer has encountered a problem and needs to close", the box has a debug button or send error report. What kind of update do, The version of IE is 6.0.2900.2180.xpsp.
View 6 Replies View Related