My laptop has just starting showing the above message whenever I shut down or restart. It then gives me the option to "End Now" or let it end itself. What is this error for as i've noticed that the laptop is also running slower not sure if this is connected to this or not.
View 5 Replies
Often when I start my computer my CPU usage reaches 100% even though no programs are running. When I go to reboot it, an "End Program - Zoom In" window pops up and I have to click on OK to end the program for the computer to shut down. It seems obvious to me that this "Zoom In" program is using all my resources but I don't know how to keep it from starting - and it doesn't always start.My computer is an Acer TravelMate 2300 with an Intel Celeron 1500 Mhz processor and 1.23 Ghz of RAM, Windows XP Home Edition SP2. I have AVG anti virus and run AVG Spyware, Ad-Aware, and SpyBot regularly.
View 3 Replies View RelatedAre there any software that will allow you to zoom on your XP desktop and navagete (move around while in xoom mode? I know Mac has this by holding a key and using schroll on your mouse. This is useful even while playing videos that dont have zoom feature in the player, or is there?
View 8 Replies View RelatedI was playing a game (sims2), and after closing it down everything on my desktop looks like it's all stretched or zoomed in on and the font is like the font from the game(?!) - now my only problem is I can't get it to go back to normal. It's not that the windows or font have been changed in the display properties. Even when I look at my photos they are all stretched out of wack too!Please help! Because this has happened on my hubbies work computer.
View 1 Replies View RelatedDell Latitude 810D probably about 4 years old running XP Pro SP3. The following has happened a few times in last 18 months but reboot has always solved problem - today it continues even after reboot. No new software has been added recently; anti-virus program runs in background all the time and full sys scan every night. Dell tech support says it is a software issue. I am not getting any error messages, just screen magnification that has not been asked for by user.
When opening Firefox or MSWord initially the web page (or word document) looks normal at a reasonable text point size, but within a few seconds it progressively zooms larger to over flow the screen. In Firefox it looks like 1,600% in Word it seems to go to 500%. In either application using the menu or keyboard shortcut to restore screen to a more readable text size only retains that for a few seconds before it zooms and over flows the screen. Usually clicking on the scroll bar to move vertically is erratic and even though you click to go down on the page the screen seems to jump downward but then back up on its own.
As I said, rebooting typical would solve things but not today. Using the computer of a friend as my laptop is impossible to work with. Typing text in browser search, or Word, or email program because of the magnification becomes nearly impossible to track. I have not tried other apps, but the magnification is consistent except that with Internet Explorer things automatically zoom out making things at about 12% size.
Not sure this is an operating system issue but was not sure which forum to post this in. I am currently running a full system scan (Kaspersky Internet Security 2010). Desktop looks normal (icons and text labels look the same size that they always do; Windows Explorer also looks normal. Thanks for any assistance.
I've been using XP Pro for a few years now. However, on my last re-install I left off ACDSee and was just going to use XP's own settings for viewing photos. I'm now using SP2.I was certain that in the 'filmstrip' setting for photos there was a 'Zoom IN/OUT' option - am I wrong? I'm using TweakUI + TweakXP Pro 4, I've checked everywhere but I can't find anywhere that the zoom option has been unchecked? Is it there or can I enable it somehow?
View 3 Replies View RelatedDell620D :Every time ,when I'm connecting a projector (or an external LCD Screen) to my laptop, the following are happening:
1. When I'm opening any doc file (Word 2007) or PPT file, the file appears with the maximum zoom (400%), without the ability to change back the zoom to 100%.Also, I can't scroll the file up or down !
2. The resolution of the projector's screen and the laptop's screen is changing (Once I'm click on "Fun F8"), so I can see it all as a 200% Zoom.Refer to the expert's diagnostic:
Once I'm replacing my HardDisk by another one, the phenomenon is disappear, which mean, we have to format the HD & re-install the XP.
Anybody know how to permanently set the Zoom function for every Explorer page you open to different than the set 100%.The reason is I have just purchased a new 20" widescreen and it seems the only method of obtaining larger screen inages using the recommended resolution.Everything is so small! Each page I open I have to keep manually altering the zoom function and when working on quite a few pages at a time its getting tedious!
View 3 Replies View RelatedI dont care if faces will look stupid but i looking for prog that can show widescreen video zoomed to full square screen.
View 1 Replies View RelatedUsing Windows XP . ASUS AMD socket A.The official Logitech website directs you to various driver inspector software which scans your computer and identifies driver updates needed. Very nice, but they all charge $30 to download the updates. I may be mean but I thought updates of this kind should be free. Where can I find a free update for my webcam driver please?
View 2 Replies View Relatedi messed around with it for a while changing zoom, stretch, dot to dot ect .Finnaly i got the tv's view mode to normal no stretch and filled all 32" perfectly with my desktop and the resolution was something like 2040x1200 or 1920x1080 not sure exactly..i should have wrote that down but close to that..
View 1 Replies View RelatedI need the name of the .inf file that the hardware wizard needs to install this webcam. The Logitech QuickCam Zoom v.8.4.6 software installs but the hardware wizard says that a required inf file cannot be found. I spoke with Logitech support and they had me uninstall the software using Add/Remove, then delete Logitech folders, and edit the registry to remove all references to Vid_046, then perform a clean boot. Reinstalled the software, when it said to restart, I clicked no, then changed msconfig back to normal startup, then rebooted. Upon reboot, I get the Logitech splash screen saying to connect camera to pc. When I do, the hardware wizard starts but gives the error that the .inf file cannot be found and the Logitech screen says that no camera was connected. (Should I have rebooted, connected camera, then changed msconfig back to normal startup?) I ran services.msc and find that Human Interface Device Access is Disabled. Could this be keeping the system from finding the..inf file?
View 2 Replies View RelatedI have been using Add/Remove icon in Control Panel to remove programs. Although the Win2k Pro is running fine ,the icon of Add/Remove Program is not opening the next window to remove the programs.
I downloaded a program from Ebay and after installing it I noticed it didn't have a uninstall. I used my add & remove program to uninstall the program but not all of it got uninstalled. I deleted the folder and then did a search in my registry for anything with refernce to the programs name "Ebay's Blackthorne" and deleted all entries with that name.Every time I reboot windows tries to install something for Blackthorne and I have to keep cancelling it out.
View 11 Replies View RelatedI tried to use "Compressed (Zipped) Folders" in Windows. It didn't work. Then I tried right clicking on a folder/file, selecting "Properties", pushing the "Advanced" button,I then checked "Compress contents to save disk space",and the folder and its contents turned blue but the size of the files,seeming, hadn't changed. Have the files actually been compressed? Should I get an external ZIP program? If so can you recommend a program?
View 6 Replies View RelatedHave had a problem for some time now. Program keep looking up and then get this error report. Have done a registry clean,
View 1 Replies View RelatedIt is frustrating having every program automatically install to program files, including minor things like audio attachment. I know I'll end up with tons and tons of folders in program files. Beyond that, I can't access program files from the other computers on the network. Is there a good way to reorganize/move files to my C drive in a way that would be efficient and wouldn't require reinstalling every single program in a different place?
View 7 Replies View RelatedUm.. I think this could go here. Well i just partitioned my hard drive and i seperated it by music, programs, etc. What im trying to do is get all my programs to use the seperate partition (E) instead of C:. I just wanted to know how to do this.
View 1 Replies View RelatedI have a Canon CanoCraft CS-P Series Scanning program and when I logg on as guest, I get an error saying, " Canon CanoCraft CS-P Series has encountered a problem and needs to close. We are sorry for the inconvenience. " On all other accounts, the program works normally. It only doesn't work on the Guest account.
View 14 Replies View RelatedI cant delete a spyware program that made it on my laptop.
View 1 Replies View Relatedcan someone please help 9 times out of 10 when i shut down i get a message that some prog is not responding click ok to end this prog -sometimes it ie or .
View 5 Replies View RelatedEven though I removed a program it is still in the control panel's add/remove programs list. How can I get rid of it?
View 5 Replies View Relatedis it possible to remove a installed program's name from the add/remove program list in the control panel. i recently had an important program removes from my system by mistake. i would like to make it im possible for tis to happen "by mistake" again. i want to keep the program installed but not have it show up in the list of programs in add/install programs.
I have a dos based application, previously running well in windows 98, but because of bought a new pc system, i wish to use the application in my new pc, running XP. But unluckily, it shows "Not Authorized program!" everytime i try to run the .pif file, or even directly running the .exe file.
View 5 Replies View RelatedI have Windows XP. Recently got F-Secure anti virus, snags the trojan stuff but sometimes says "can't be accessed" when I delete it. Recently Window defender has been going off constantly, it has to restart the computer *** of the time. Ealier when it did this all sorts of things started flasing ending with an error report to/from Microsoft. I followed their directions to remove a program. NOW HERES THE PROBLEM; to uninstall "The Best Offers" program the "Bad Guys" want me to download something, save it and disenable security. Should I follow the uninstall directions or is there a better way
View 14 Replies View RelatedJust noticed that my program bar is gone.Start, programs not their? Sure like to have it back.
View 7 Replies View RelatedWhen I try to execute the 'exe' program, I get the message shown in the subject line, plus 'can't find the 'exe' program or one of it's components', etc, etc.I have been working on this for the past three days with no success.Now. just this morning, I installed this program on my desktop computer, with the identical OS and HD configuration (EXCEPT XP-2) and the exe program works fine.
I am having problems downloading any programs. Including my auto updates. I contacted my Internet service and they believe that this is a spy-ware problem. They ran me through different things to try and I still cannot download. Every time I try I get a pop up that states Microsoft has encountered a problem and needs to close. I was able to set up temp web page through my Internet service, but am unable to complete the process due top the fact that I cannot download.
View 4 Replies View RelatedHow do I copy a program onto a cd
View 2 Replies View RelatedI go into my Control Panel and I click Add or Remove Program and I get this Run a DLL as an App has encountered a problem and needs to close. We are sorry for the inconvenience. With this extra info:
AppName: rundll32.exe AppVer: 5.1.2600.2180 ModName: unknown
ModVer: 0.0.0.0 Offset: 00750063
I have already gone under MSConfig and unchecked the rundll32.exe from start up.
I am trying to run a .exe file, but when i try to run it CMD pops up and then dissapears. Other than that, nothing happens. So, i tried using CMD to open the program, but then it says "Program too big to fit in memory". How can i fix this? I doubt that it's a RAM problem, the program is only 364 MB...
View 1 Replies View Related
