Enable To Disabled Device
Aug 20, 2006
My Windows XP home dont open , last nite I was making a roll back of a driver of ULi sata 5289 and was ok , then I went to the device manager to chek the status of my driver and accidentally I disable teh device ( I know.... me bad ) now my windows give me the screen of safe mode choice , but when i try to open safe mode , it comes back to this screen , windows try to open but its on loop , how can I get there and enable again the device ? or I need to boot into my CD and fix windows?
View 14 Replies
ADVERTISEMENT
Mar 17, 2007
I would use one, but I don't want one so I disabled it in Security Center. But Microsoft thinks I must have inadvertently disabled it, so Windows Update occasionally turns it back on.Is there a registry tweak to prevent Microsoft from turning the firewall back on?
View 8 Replies
View Related
Jul 20, 2008
A friend's Acer laptop, running XP, has a Broadcom Ethernet card which is disabled at boot. I'm told it started this a few weeks back, so I don't know if it's related to a M$ patch. Although I can turn the driver on in the device manager it doesn't want to remember the driver state when rebooted. Last time, when I thought I'd fixed it by disabling unneeded startup programs, I'd stumbled over a program advertising ability to set drivers to be enabled at boot but I don't want to buy a program to solve a simple problem. atm there are just Kaspersky and the Windoh$ firewall plus a few Acer and normal startup programs obvious. How do I set the Ethernet's driver to enabled from boot?..and is it clear what might have triggered this?
View 5 Replies
View Related
Jan 17, 2010
My computer was having a personality disorder so I decided to save all my files from the hard drive and do a system restore back to the original factory settings. I don't have the installation disks anymore and would like to avoid having to order them. When I started the process, the desktop locked up on me. The keyboard wasn't recognized and I couldn't mouse to any programs or functions. It didn't even complete it's startup sequence, and the icons on the right side by the clock never showed up.
So I restarted the computer in safe mode and saved my files. When I tried to do a system restore from safe mode, I got an error stating that system restore was disabled and couldn't be enabled in safe mode. I'd have to restart in normal mode and change the settings. Therein lies the problem: when I start in normal mode the computer locks up immediately, and I can't change the settings
View 14 Replies
View Related
Aug 18, 2005
After Service pack 2 was installed my bluetooth went mad(basicly)But i now got all the main features working with the Bluetooth.Before the installation of sp2 i had a mrouter that shared my internet connection with my phone via bluetooth.Now after that when i try to conect i get "error message 80042000"The router service could not be found on the device or bluetooth may be disabled"..Iv searched the net but no luck. Any tips at all would be great.The Bluetooth software is Widcomm.
View 1 Replies
View Related
Nov 22, 2008
Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies
View Related
Oct 1, 2005
I have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies
View Related
Jul 15, 2005
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies
View Related
Aug 4, 2010
I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies
View Related
May 12, 2010
Running Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies
View Related
Dec 17, 2005
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies
View Related
Jul 21, 2005
I've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies
View Related
Aug 31, 2005
I had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
View 3 Replies
View Related
Dec 8, 2004
I have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
View 3 Replies
View Related
Sep 19, 2006
The system seems to be very stable at this point in time. I run Norton Utilities and other maintenance sw as well as have a firewall/pest remover/anti-virus. Behavior - most things work fine on the USB ports, either the hub or direct connects. One digital camera will only work when direct connected(not thru the hub). I have a scanner that will only work on a 2003 Compaq Presario, but not on the whitebox on any port. Also, I have had two devices that won't work at all. I have noticed that the USB mass storage device icon doesn't seem to be present now when I attach a flash drive. This is recent behavior and doesn't predate every USB problem.
View 4 Replies
View Related
Mar 11, 2006
Last night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies
View Related
Dec 24, 2007
I have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies
View Related
Jun 20, 2008
I'm using XP SP3 Home Gateway desktop My device Manager has nothing in it. I don't know when it quit showing. I have checked Bios plug&Play, and it is set in Auto. I am also getting an error stating my recovery D: is running out of disk space.
View 2 Replies
View Related
Dec 28, 2007
My computer cannot detect any cd's in my DVD or CD drive. When I open Device Manager the CD/DVD devices have an error. This error: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Click Troubleshoot to start the troubleshooter for this device.When I run the DriverScan it simply doesn't even have an entry for the drives, probably since it thinks it doesn't even exist at the moment.
View 5 Replies
View Related
Aug 3, 2005
Anyone know how I can rename a device in device manager, (or the registry), so it doesn't show #2 after the device.I used the leadtek driver uninstall tool last night. And it removed the drivers I had for this Leadtek Deluxe tuner alright.BUT it also renamed my onboard Gigabit LAN (onboard) to #2 my scanner to #2,
and removed my Nvidia drivers for the video card.And reverted the videocard drivers to MS Nvidia drivers.I managed to fix the scanner entry by uninstalling the drivers, then rebooting and reinstalling the drivers.And I managed to fix the videocard drivers, by reinstalling the Nvidia drivers.So, yup, anyone have any idea how I can change the board LAN, so it doesnt have #2 after it? sing XP Pro SP2
View 3 Replies
View Related
Nov 10, 2007
the other day I tried to insert my friends usb into one of the frontal usb ports, it said it couldn't recognize the device or that it had malfunctioned. From that point on, Anything connected to the pc via the usb won't be recognized. everything else on the pc works fine, so theirs either some really easy way of fixing this or i need to buy a new motherboard/serial bus.
View 1 Replies
View Related
Dec 4, 2007
I bought a WD Passport 160gb. and it worked fine I left it running on my computer for 2 weeks and now its not working error (USB Device does not recognize device) so I thought I broke it, I went out and bought another one and I am getting the same error with the new one and old one, on mulit computers that it worked on in the past, I even tried in on new computers.
View 37 Replies
View Related
Aug 27, 2005
This has happened several times and I don't know how to correct it, if anyone has a suggestion please let me know. When I uninstall. unplug and remove drivers, for a USB device (web cam) and then reinstall it later Windows says it #2 or #3 or #4 but there is no other device. Why does it name it that way and how can I make it install as just that device.This has also happened when I installed a replacement NIC card.I hope someone understands what I am trying to explain.
View 1 Replies
View Related
Dec 17, 2007
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies
View Related
Jul 11, 2006
I have a Dell Inspiron 8100 laptop running XP Home. The VGA driver has been disabled and all I get after bootup is a black screen. None of the safe modes work. I gan get into recovery. How do I re-enable the VGA driver that was disabled?
View 19 Replies
View Related
Oct 30, 2009
cookies is disabled. how do i go about puting the cookies back to the on enabled.
View 1 Replies
View Related
Jan 29, 2009
how can I enable auto run?
View 1 Replies
View Related
Dec 30, 2007
I have Windows XP SP2 installed on an "ASUS P4C800-E Deluxe" which used to work with a Celeron D 2.4 GHz. I Finaly bought a P4 3.0 GHz (HT) and changed the CPU. The OS detected the new cpu and with a driver signing warning, it installed the new processor (The driver is provided by Microsoft). Although everything seems to work fine I don't have "Hyper Threading" enabled in Windows, while it is reported to be available in BIOS. I found some boot.ini editing guide that didn't help. I don't want to fresh install windows since I'm faithful to my aged XP which was installed around 1998 and upgraded to-date! How can I enable HT?
View 12 Replies
View Related
Jul 7, 2007
I am using Windows XP. My computer won't let me view Java even though I have it enabled. Certain websites can't be viewed correctly, or it tells me I need to enable Java. I have Active Scripting enabled. I've tried uninstalling Java and reinstalling it again, but it doesn't work.
View 14 Replies
View Related
Mar 9, 2009
I go into Control Panel >Power Options>Hibernate and I click on "enable Hibernation" then apply and I get the message that process cannot be enabled as another process is using file. I do a clean boot and try again but get the same message. Does anyone have an idea of which other process might be using the necessary file and how I can reenable Hibernation?
View 9 Replies
View Related
Nov 21, 2006
I am trying to set up a Sype account. I am told by their wizard that I must enable cookes for Skype.
#1 How do I do that?
#2 Do I use www.skype.com as the site to set up or some other derivation of that site for phone calls?
View 2 Replies
View Related
