Dead Laptop Constantly Restarting
Jan 21, 2008
I have a (really) old Compaq Armada M300 running Win2K Pro. It was given to me several years ago from a buddy who upgraded. Old, slow, not much space, but we use it daily as an extremely convenient 'dummy terminal' to get to the internet & work on documents/files on the desktop upstairs.Yesterday afternoon, while nobody was working on it, it suddenly attempted to restart. Just a quirk that I thought wouldn't matter. Wrong it is now stuck in a never-ending cycle of restarting compaq intro screen, then windows startup screen, then an extremely quick blue screen that flashes too quickly for me to even see what it's saying, then restarts all over.I've tried all various ways to start in setup (safe mode, safe mode w/ networking, etc), all different options produce the same result.Since it was given to me on a whim so many years ago, I don't have the install CD, nor do I have a boot disk for it. According to what I've found, I need the CD to create a win2K boot disk.
View 2 Replies
ADVERTISEMENT
Feb 9, 2009
I have a problem with my laptop & it is really starting to do my head in. I got my vaio about 2 years ago, it was second hand, so came with no CDs. nIt has been running fine with no problems until this morning.It is constantly restarting, with a blue screen that flashes up momentarily.I saw something that someone mentioned about it being to do with the wireless, so I've switched that off, and it has stopped restarting. As soon as I switch it back on though, it goes back in to constantly restarting.I can't even seem to get into the menu to start with safe mode. I've tried to restore the system to when it was working fine, but this hasn't helped.
View 14 Replies
View Related
Jul 28, 2007
When I turn on my computer, it starts up like it's supposed to. Then, when it comes to the Windows XP loading page (you know, the one with the bar scrolling underneath it), it suddenly goes to a Blue Screen of Death for a straight millisecond, then reboots again. Then my computer gives me 5 options. I could load Windows at the previous settings that worked, load Windows normally, and there were three other options that involved loading Windows in safe mode. I've tried all five. All five result in the computer rebooting itself again. There was a timer below for 20 seconds for me to choose an option, so I doubt that it's a worm causing this problem.My antivirus is up-to-date and I do regular scans. I have a firewall.
It couldn't have been a power surge, because I have a power strip on the computer, and it says that it's protected. And, before all of this was happening (a few minutes before), my computer was acting normally. There wasn't anything funky going on, so I doubt that my hard drive was dead.
View 8 Replies
View Related
Nov 3, 2008
I have had an Acer Aspire 5670 for about 2 years. This morning, it was making a horrible noise (I left it on overnight and couldn't hear the noise until I went into my office). It sounded like a fan or spinning noise of some kind, but also might have been an audio file that was stuck repeating the first tenth of a second of the track. In any event, the monitor was dark and the PC was totally nonresponsive. I did a hard reboot and since then, the PC has not worked. The power button does turn it on and I can hear the HDD spinning and the DVD/CD drive looking for a disc (and it will accept/eject discs) but the screen never comes on and the PC doesn't seem to boot up. I don't ever hear the Windows welcome .wav file.
how should i fix the problem?
View 6 Replies
View Related
May 13, 2006
My laptop won't even turn on. It's a Dell 700m just purchased 2 years ago. It is in mint condition and even with the charger plugged in, it won't turn on. I held the button down over 3 minutes and nothing yet. Took battery off, waited a few then still nothing.It looks like a dead HD?
View 4 Replies
View Related
Dec 5, 2008
Dell D 800 Laptop running XP SP2.Internal AND external Keyboards and Mouse NOT working after boot to XP. Can't enter cntrl/Alt/Del or anything to log in. Keyboard DOES work in Bios mode but is lost as soon as xp is loaded. Does NOT work in SAFE mode either because can't log in..(no Cntrl/Alt Del).I've tried repair and reinstall of xp but still does not recognize any keystrokes after boot to xp.
View 14 Replies
View Related
Oct 5, 2007
My laptop keeps on crashing, whilst playing on world of warcraft, my laptop just completely switches itself off without warning. As of yet, has only crashed whilst playing wow. This is also not due to overheating, as im using a separate fan unit, after heat issues arose Using an acer laptop - aspire 5610 - with Xp proffesional, media center. Also sometimes, after restarting the laptop, and selecting the screen name, it comes up with my background wallpaper, but no icons, start bar, etc - only way to get rid of this is turning the power button off. Included a hijackthis log (hope i've done it right.
View 3 Replies
View Related
Jan 23, 2009
My name's Montana from london and i've got a problem with my sony laptop viao recently as it keeps on shuting off and on over and over and i cant even do anything..Is there anyway i can solve this issue please.I look forward to hearing from you'all.
View 2 Replies
View Related
Apr 15, 2008
I have tried a search here, but not found a thread with the same problem as mine. That may well be my fault; I am relatively inexperienced so may be using the wrong search terms. My apologies if that is the case.I have a Sony Vaio laptop running XP with a built in wireless which can be switched on or off with a sliding button at the front. The laptop has not been used for a couple of weeks, and now I find that it will not start up properly as long as the wireless is switched on. If it is on, the laptop constantly restarts then crashes and restarts again, never getting started up properly. If I switch off the wireless, it will start perfectly normally. If I then switch the wireless on after a normal startup, it may take a few seconds or a few minutes, but it will then crash and go back to the restart-crash cycle. There is an error screen which comes up but it is too briefly displayed to read it or get a screenshot.
I did a little research and tried a system restore which did not work. I also tried restarting without my wireless keyboard and mouse hooked up. When I did that and switched on the wireless, it stayed up long enough for me to connect to my network (the only time it was up long enough) then reverted to the restart/crash cycle again.
View 7 Replies
View Related
Oct 2, 2009
I have an Acer Laptop that will no longer bootup when I turn it on it keeps restarting and It didn't come with a CD. I tried booting it in Safe Mode but it does the same thing.
What can I do?
View 4 Replies
View Related
Oct 28, 2007
I have a Toshiba Satellite A15-S129, and it asks me a couple of options on how I want to start it up1)Safe Mode 2) Safe Mode with Networking 3) Safe Mode with Command Prompt 4) Last known Good Configuration 5) Start Windows Normally. None of them work. It goes to the Loading part and a blue screen flashes and then it restarts.
View 6 Replies
View Related
Feb 13, 2008
I have an issue with my Inspiron laptop. One day about six months ago, it locked up. When restarting I got a blue screen saying "STOP: c00002221 Unknown Hard Error SystemRootSystem32tdll.dll." I looked all over the internet and found a bunch of people with the same issue. Most were told they were in for a format and reinstall of Windows XP to correct the problem and that all was lost. I did find one forum suggesting to do a repair/install which I did. worked just like an upgrade and all my files and settings were preserved.
View 7 Replies
View Related
May 19, 2008
After I used Fix-it Utlilies the program erased essential system folders. So now when I do check disk it reboots, flashes a blue screen real fast (so fast I can't even read it) then restarts the computer, restarts check disk, restarts the computer, and on & on. It won't stop doing this till I interrupt check disk at the start by hitting any key but then I end up with a black screen with instructions which include safe mode, safe mode with networking, start windows normally & last known configuration
I can't boot from an installation CD to do a "repair" since Windows was preinstalled in the drive so I have NO CD. Does system recovery work?, who knows, I'm a noob and have no idea how to use it. The only thing I've tried to fix it was 2 things : 1) use system restore which failed; 2) use run> sfc /scannow but this file checker is also broken and will barely start before it errors and stops. I don't know what else to do besides reformat
View 3 Replies
View Related
Oct 31, 2009
When I turn the computer on as soon as the welcome screen comes up to sign in, a window pops up saying "The system is shutting down. Please save all work in progress and log off. Any unsaved changes will be lost. This shutdown was initiated by NT AUTHORITYSYSTEM. Time before shutdown: [counts down from 1 min] Message: the system process 'C:WINDOWSsystem32services.exe' terminated unexpectedly with status code -1073741482. The system will now shut down and restart."
I have tried system restore which is unsuccessful, I have done "last known good configuration" which also doesn't work. I'm in grad school and need my computer
View 13 Replies
View Related
Sep 18, 2005
the computer boots up and goes to the windows 2000 screen but then the next screen would be the desktop but instead it reboots and goes to the same spot the 2000 screen but never makes it to the desktop, this happens over and over. I tried to go into safe mode but does the same thing tried command prompt only so I could type in SCANREG but it just reboots again I can't get anywhere to do anything.
The last thing I tried was last known good configuration. I clicked on it and a page comes up with all the writing I hardly got a chance to read it when it reboot again. but under the first paragraph wher it says something about last know good configuration it has a space and the it says project 1 like I could have click on that if I would have been fast enough.
View 9 Replies
View Related
Feb 8, 2009
The computer takes my password to sign in and I get a message "a problem with the hard drive has been detected consult with the troubleshooting section of your user manual.Hit enter to continue.Then I get the gateway picture and it says hit F4 to continue.It just freezes.
View 7 Replies
View Related
Jan 4, 2007
I've got an HP Pavilion ze4400 on which the touchpad doesn't work. I can't be sure whether it's a faulty device or if drivers aren't installed. In Control Panel, under Mouse, Hardware, only one device (the USB mouse I'm using) shows up. I'm not sure what the standard touchpad driver for HP notebooks is. Going through the Add Hardware Wizard and telling XP that the device is already installed, it then gives me a list of installed hardware to select from. I don't know what that driver is, if it's even in there. what the driver is this
View 2 Replies
View Related
May 13, 2005
I turned on my computer and everything was fine, but realized husband had unplugged the dsl last night due to possible incoming storms. So I replugged in the dsl and as usual when this happens have to reboot my computer to get it to realize its there. So I went to start ..shut down..restart and did it. And it never came back. After about 5 min of it just sitting there I went ahead and pushed in the restart button on the machine. It makes its usual start up noise and the lights all come on except now there is a strange clicking noise I do not recognize and the cd rom seems to hang a bit, then the lights go off (as usual) except for the power light. But nothing comes up on the screen and no sounds are to be heard from the speakers. I now shut it all down and let it sit for about 20 min then retry still nothing. So I open the case up and check all the wires and with a can of air blow away any dust.
View 14 Replies
View Related
May 12, 2007
I'm trying to rebuild a pair of old 'dead' computers that had WinXP preinstalled on them.
They have the COA Lic. Stickers on the cases, but the old HD's, Mobo's, etc, are toast.
When I finish with all new bits inside, will I have to call MS & try to get their 'approval' to be 'Genuine'?
Will this be a major PITA ?
Is it worth doing ?
View 9 Replies
View Related
Jan 17, 2008
Alright the Problem is, when I start the computer the key board and mouse are working just fine both showing lights and I can access the boot menu and everything through the key board. But when windows boots up both the mouse and the keyboard go dead, and there is nothing I can do besides looking at the User Login Screen as I can not use ether my mouse or keyboard.
View 8 Replies
View Related
Feb 9, 2008
compaq computer has bit the dust and I'm building her a new one. Her original 20GB harddrive won't boot up in the new system....it gets to where the XP colored window flashes, goes to a blue screen of death screen, but that blinks out so quickly that I can't read it or pause it, and the computer reboots itself. It won't boot into safemode either. thought the harddrive was dead since I could hear it click at that point
View 6 Replies
View Related
Oct 24, 2003
Recently took some hits on my Compaq Presario 7478 system. Got two or three nasties via the 'Net. After McAfee's virus scan and removal, began experiencing weird happenings, such as system closing down and restarting. Then just not starting. Tried a few remedies [probably inadvisedly], and finally the system seemed to hang on my restore at the same place repeatedly.Ultimately the system could no longer establish my OS. Restore failed.
Bottom line: Could not invoke computer restore. Could do nothing with this computer.Q... Being compaq is the BIOS set to a certain condition that would prevent my reformatting the hard drive and restablishing an OS? Is this an option I can override? If I were to piggy-back the existing hard drive onto an operating hard-drive and reformat would that solve this problem and permit me to then create or repair the hard drive subsequently to get my compaq back?
View 3 Replies
View Related
Aug 8, 2007
My hard drive died on me recently. I bought a new one, put the jumper on master and put the dead hard drive on slave hoping to retrieve the files that were stored on it, but my computer won't recognize it. I checked the cable connections and they seem to be fine. When I put another good hard drive on slave the computer does recognize it. Could I still somehow retreive the files from the old hard drives or did I lose them for good?
View 1 Replies
View Related
Sep 30, 2005
The mother board of my hp laptop died. I have another laptop (Dell). Any ideas how I can transfer the data on the hard disk of the old hp to the new Dell?
View 2 Replies
View Related
Jun 12, 2006
Running windows XP home edition. If I boot to safe mode (F8) my keyboard and mouse are inop. Both are usb connected.
View 5 Replies
View Related
Jun 27, 2006
My computer died yesterday.If I use the system setup, an error message appear telling me the file windowssystem32configsystem is corrupted.Is there any chance to recover my files. I backed them up about 1 month ago, and I don't like to loose my work.
View 12 Replies
View Related
Dec 11, 2005
I am running XP Pro SP2 2.4 Ghz 512 memory. My problem is that I can not connect to the internet with either firefox or IE. My DSL is working fine with a connection speed of 100mgs. Everytime I open either browser it only leads to a dead link. I went to command prompt and pinged Yahoo and the ping was succesful
View 6 Replies
View Related
Sep 15, 2006
When I turn my computer on it shows me the normal Windows XP loading icon and then that goes away and I can watch the CPU light go haywire right as the blue screen (of death) says that there has been a fatal error (0x0000135) and the system has shut down. I have no clue what to do... the only way to bypass this (if you want to call it that) is to hit F2 and go to setup mode. I don't know what to do there. I've had problems before where the computer will only go to one or another BSOD and I've had to completely clear the hard drive and reload everything on it aka start from scratch. Usually my dad does this but first I would like to see if there is any other way to fix it.
View 1 Replies
View Related
Jul 20, 2005
Recently reinstalled Windows. When I did the restore it but back all of my desktop shortcuts and items that were on the Start/Programs menus even though many of them are no longer on the machine. Is there a program that will hunt for those "dead end" shortcuts and menu items & delete them?
View 2 Replies
View Related
Feb 11, 2009
I?m trying to run a repair on my friends Compaq Presario 1245 but I have a strange problem. Every time I boot into setup, it will load the setup files and then just try to start windows up. The setup program will boot from the CD, load the drivers and whatnot, but instead of going into the actual setup process (where you can install a clean copy, repair etc), it just tries to boot to Windows automatically (Which doesn?t work).I've tried it even with a Windows 2003 CD and the same thing happens. I have went and reset the bios to their factory settings just in case for a session but that doesn't seem to be the problem (the CMOS battery is dead anyways). I was told the CMOS battery being dead might be the problem but its never really been and issue for me before when Ive worked on laptops (with dead CMOS batteries)
View 3 Replies
View Related
Jun 16, 2008
Windows XP Professional I can't get access to the hardware specs. My nephew put the computer together for me from componets purchased at Fry's. For years it has given no problems until now... I am unable to even log on to look up the CPU info...My nephew is in the middle of getting married or I would ask him.
The problem started with a MicroSoft Error message and inability to open/print Word docs. When I tried to open/print a doc. I was receiving error: "The application failed to initialize properly (0xc0150002). Click on OK to terminate the application." I researched this and found a fix on the Microsoft They stated that the problem occures if you upgrade/reinstall/repair Windows XP. A friend of my husbands had put my XP OP disc into my computer trying to copy it and I think he might have inadvertently loaded it? ...
View 9 Replies
View Related
