Connect Printer To Computer?
Apr 14, 2010How do I connect my son's computer to my printer z700-p7oo on my computer?
View 1 RepliesHow do I connect my son's computer to my printer z700-p7oo on my computer?
View 1 RepliesI had a problem trying to connect my Canon Pixma 4000 so that I could access it wireless via our home LAN. I have one laptop(the wife's) attached directly to the router (cable service from Optimum). My laptop is used wirelessly from another part of the home. All was working well, except I could never get the printer to work so that I could use it wirelessly, so I had it plugged in directly to my laptop. Up to this point, it was all ok. I have AVG and ZoneAlarm running on both computers. A friend, (really) was at my home and volunteered to connect the printer so that it would work wirelessly. He is a UNIX administrator, manages a number of pc's too. I thought, "this is great, my own administrator".
To shorten the story, he removed ZA, the computer will not work wirelessly, only works when connected directly to the modem and the printer doesn't work wireless. I called ZA, and they guided me through removing all the "orphans" that were left behind, so that cleared up a problem whereas I could connect to the net, but couldn't get to another url. I did not re-install ZA yet, because I don't want to add anything else into the mix. I will post a HJT log if that is what is needed. I DO NOT care if the printer works wirelessly. I will live with it connected to the back of my computer, BUT, I do want my laptop to work wirelessly so that both me and my Frau can be on-line at the same time. I have been through the IP address checking, all is ok there. If I try to connect via the SYSLINK wireless, I get nothing, even PING ing different sites gets no valid response. Regrettably, I have some tech knowledge, but not enough to figure out this one.
Every time I turn my printer on, I get the following message: USB device can run faster if you connect to a 2.0 USB port. As I have a lot of USB devices, I purchased a USB hub and have the printer going through it. Everything prints fine, should I swap my devices so the printer runs faster? Will it make a difference?Running XP Home with the following USB devices: scanner, 2 USB printers, memory stick, and keyboard. Keyboard has two USB ports, but same message occurs.
View 4 Replies View RelatedHave an XP box with a shared printer on it. Have setup to allow, network, everyone, anonymous, guest, etc. Anything to let the people print to it without a password. However to do so, all need to connect to the \ipshare first, enter id and password (and admin acct o n the XP box). Then it prints, until they log off then it repeats. I do not want any prompt for a password. With the old NT 4 system there it worked fine. No password. New system and new printer was put in place. Permissions seem right and like I said I tried adding everything to have ti connect without a password. And the last thing I wan tto do is add every single user to that box as an account.
View 10 Replies View RelatedI want to connect Deskjet 340 printer to my laptop.The problem is that the 340 is a parallel printer and the laptop only has USB ports.When I use a parallel to USB printer cord, the laptop won't recognize the connection. It wants to use LPT1, so it can't find the printer.
View 10 Replies View RelatedMy printer locks upp my entire WinXp pro when telling it to print something out.There's nothing wrong with the printer itself or the cables attached to it, a've checked on another comp. Also tried to reinstall the LPT1 port and the drivers several times without no success. Even checked so that there's no other software that interferes with the printer drivers. and did run a virus check, both in Win and in pure DOS-mode, nothing. Starting to suspect that the LPTport on my Mobo- ASUS P4P800E Deluxe is screwed.The setting in BIOS is set to ECP as default and can't be manipulated.
View 1 Replies View RelatedIF MY PRINTER IS ON (HP PSC 1350 ALL IN ONE) & I turn my computer on My computer freezes. i never makes it to windows. I have to power off my printer then turn my computer on and at that all is ok.
View 7 Replies View RelatedI'm having problems with my HP 6122 printer, trying to print a cover for a family history.The cover contains a small b/w photo in center, a caption of one line and framed with a thin blue line, and the whole page framed with the same blue line on the border.I wanted the photo to be printed in "best" as anything less bring moire to the photo.Every time I have tried to do this, the printer does nothing for a minute or so, then proceeds to print the entire page black. What has happened?I can't afford to waste any more black ink, even when I'm watching so I can stop the printing before the whole page is covered.I usually have 2+ inches before I can see it to turn the Printer off.
View 4 Replies View RelatedIn the printer and faxes window there are printer icons listed in addition to my default HP Printer. Whiy are they listed there and what do they do since you can't use them...or can you and if so, how? Two that are listed on my computer are:
Broderbund PDF Creator
Quicken PDF Printer
I have Windows XP Professional with SP2. I have 1 GB of RAM and a Pentium 4 running at 2.81 GHz. Things were working AOK until I ran several anti-virus programs being Registry Mechanic, SpyBot, Ad-Aware SE, PestPatrol, & a trial version of Webroot Spy Sweeper. I seemed to start having printing problems (Epson Stylus Photo RX600) after running those. Documents start to print, but only print the first line or two of the document and in color and black and sometimes "garbage" and then it scrolls through and starts on another sheet of paper and so on and so forth. It doesn't stop, so I access my printer monitor and tell it to cancel all documents. Well, it takes forever to do that and so I shut off the printer and then everything seemed to stop printing. The next time I try to print something, I get the same problem. I even downloaded updated Epson printer software from the Epson site and installed it after deleting my old Epson printer software
View 3 Replies View RelatedI'm trying to get my Canon IP8500 printer to work with my Samsung NC20 netbook which is running Windows XP.Usually I simply plug the printer into any Windows XP computer and it'll automatically install the necessary drivers. However, when I plug it into my netbook and instruct Windows XP to automatically search/find and install the drivers, it can't find any.So I've gone onto the Canon website and manually downloaded the drivers, but when I try to install them via the setup.exe it says that a newer driver is already installed, and aborts the setup.The weird thing is that there definitely isn't a driver already installed, because I've even gone into device manager and uninstalled the printer/driver before trying again.
View 2 Replies View RelatedMy computer was running slow so I thought I'd be "smart" and delete a few files. I guess I deleted something important because since then I haven't been able to access any hardware. I tried to repair by going back to an earlier setting but it wont do that either. I can't reinstall my Windows XP because my computer doesn't recognize that the disk is there. Can I download from the internet? I have the following: Microsoft XP SP2 Version 2002.
View 6 Replies View RelatedI bought a new HP printer today. I had a hotfix installed at some point that shutdown and woke up my printer at shutdown and startup. The new printer isn't affected by this hotfix. Does anyone know where I can get this patch?
View 2 Replies View RelatedTwo custom PCs with XP Pro at same SP level. PC1 sees printer through switch. PC2 can not see printer. PC2 connects and sees printer when I cable the USB DIRECTLY to the printer instead of going thru a switch. Therefore, I know PC2 can print. Have tried 2 different switches. An A/B data switch and Belkin's 4x1 USB Peripheral Switch F1U401. PC1 works with both switches but PC2 does not.
View 9 Replies View RelatedCan I work year round with my PC moved to a screened in porch?
View 4 Replies View RelatedI am trying to connect a second computer to my 2wire wireless router and it is asking me for a network key i dont know what that is.
View 2 Replies View RelatedI just got hit by a trojan that attempts to download malware. My virus protection stopped all the downloads and I was able to manually remove the trojan, but I'm concerned I may have missed something. Three times in the last couple of days, I have discovered the dialer on my computer open like some application was trying to connect to the internet.
View 7 Replies View RelatedI'm having trouble with pages not loading when I'm on the internet using Netzero and Internet Explorer. It seems to be secure pages mostly (every time I want to order something online, or when I go to a company's application center and try to apply for a job.I am on my second printer (HP 3740). Granted, it's not top of the line, but I just bought it because my old one was broken (I thought) and now it is starting to have the same problems as the last one, and the problems started about a week after I bought it. It started with the printing getting faded, like the cartridge was running out of ink, then it went through the motions of printing but no ink was on the paper. Next it will stop moving, even though the power light comes on.
View 2 Replies View RelatedI want to know if adding a fax means physically connecting a fax machine with the computer. If a fax machine is not needed, do I receive faxes via my printer? How do I fax to others?
View 1 Replies View Relatedhi everybody.every since i install sp2 on my pc ,kazaa lite has a problem with connection.it keeps trying connecting but it reemains on trying, even if i let for 2 hours
View 2 Replies View RelatedI am unable to connect to the internet from a computer that is directly connected to a 2Wire wireless router with a ethernet cable, the serial number to it is 2701HG-B. side note i am able to connect wirelessly with a laptop and even with a xbox 360 with an ethernet cable. i called support and they said that the problem is because of a software app but it is not the anti virus or the firewall i have installed.
View 3 Replies View RelatedWe decided to just reinstall windows xp and start over.I did it, everything went fine,except its not allowing us to connect to the internet.Im not sure at all how to fix this.
View 4 Replies View RelatedI got a virus (at least I THINK I did, I have no other explanation) about 2 weeks ago despite firewalls, up to date antvirus, and tons of other programs to keep me safe, ie: adaware, Spybot, spyware Blaster, MSN Anti spyware, loads of stuff. Anyway, my computer suddenly refused to connect to the net, when I put the mouse on ths "Start" button all I got was the dreaded hourglass, lots of niggly little things. I ended up installing a new hard drive as the master with the other as slave and was able to salvage most of my stuff. However, I now have no sound
View 2 Replies View RelatedWe've had to change our address space and therefore the printer address has changed. I've changed the address on all but one computer. On this particular computer when I try to edit the TCP/IP port I get the message:
"An error occurred during port configuration. Access is denied."
If I try to create a new port I can select that I want it to be a Standard TCP/IP Port and then it tells me:
"Specified port cannot be added. Access is denied."
I have connected 3 new PC's on a P2P network, and connected a HP 4610 Color Laser Printer via a JetDirect 175 print server. On one PC, I can only print from the Administrator account. The other 2 computers work fine. On the one that is having issues, when printing a test page I receive a "Failed to Print" error mesage, and looking in the printer jobs menu, it shows that there was an error printing. The
Administrator account can print fine from this machine.
The user accounts are "restricted user" accounts on all 3 computers.
All 3 computers are exactly the same type, and all have the latest
updates.
After a system crash all printers are gone and when trying to add a printer I get the message:
"Operation could not be completed. The print spooler service is not running" After starting the service manually and trying to add a printer I get the message:"Operation could not be completed" and the service is stopped again.I looked at some of the previous answers and related topics (like article nine, and Q324757
currently unable to connect to the net via Forefox browser. From a read only CD, I have cleaned out several trojans, diallers and assorted rubbish, using Spybot, Adaware, and AVGfree. I have also installed Spyware Blaster. Connection remains unavailable. The installed Norton identifies C:windows erocheck.exe as a backdoor trojan but is unable to remove it and cannot then progress beyond the alert window so much for Norton.
View 14 Replies View RelatedI can't get it connect to the internet. I know the connection is good, because I can see other computers on my home network, and those computers can get to the internet (like this one). The Bad computer has IE 7, which loads ok but then I can't get anything on the web. Also have Mozilla Firefox loaded which I was using for a while, but now it won't even open up.
View 10 Replies View Relateda problem with my computer freezing up. I have windows XP. I cannot enter Run on the start up menu. When clicking on a school program I have installed it freezes. I tried to uninstall AutoCAd LT thinking that may be causing a problem. I cannot remove it because the system freezes.The system ran fine a week ago. I do not have the system connected to the internet. I also tried system restore but still have a problem with the computer freezing.
View 4 Replies View RelatedI need help with the virus sasser. I have tried everything. Every time I connect to the internet it shuts my computer down.
View 8 Replies View RelatedI tried to install ZoneAlarm last week which crashed during the installation. This has caused multiple issues:1 - Can't shut computer down - I can get to the "log off", "shut down" and "restart" option of which none do anything so I'm forced to unplug as the power on/off doesn't work either. I've checked the power management options and these are normal.2 - Can't connect to the internet via my network card. Replaced the card as the network cable works on laptop and though it was the card but no luck(Modem goes to router which splits to 2 PC's and laptop
View 3 Replies View Related