Now all went pear shaped when my CD ROM refused to "read" the CD. Using a Compaq EVO800v with Windows XP Professional (of course - that's why I'm in this newsgroup). The disc appears good: will be read in Win ME and Win98 machines
View 3 RepliesI am having probllems installing Windows XP, first of all the installation is unusually slow, it has more than 5 hours installing. Then i have a boot error from Windows NOT from the BIOS, i have tried getting into the Repair Console an using FIXMBR and FIXBOOT, unsuccesfully; removed every suspecious setting on my BIOS..... The installator copies small parts, copy 1% or 2% and stops for a while (I think it is decompressing the files, but that slow!?). After that i get a booting error (I dont remember what does it says; i will post it later, when my 4th attemp ends).
View 14 Replies View RelatedI am running Windows XP Home Edition on a Compaq/Presario desktop. The XP was pre-installed and so I have no boot disks. I hope I never need it, but just as a precaution, I made a Boot disk using a freeware program "PE Builder". The process seemed to go ok, but there was a warning that "building from an OEM version of Windows can mean trouble..."
View 3 Replies View RelatedI am trying to install a second copy of XP Pro on my system. I have the first installation on my first hard disc which is partition C: . I have another hard disc which has two partitions D: and Z:. D: has my data and Z: (20gb) is going to be for testing programs and settings and such without installing them on my main disc.
I loaded my XP Pro CD into the optical drive and went through the menus to install a new OS on partition Z. I did a quick format of partition Z in NTFS format. Installation proceeded and the computer rebooted just like usual. Then as it got to the preparing windows installation screen it froze. Just stopped. I restarted and it tried to resume but would freeze immediately again. I checked the boot.ini file and it is just like it should be. With both OS listed. I tried doing this three times and I got the same results each time. My original OS still works fine. I am considering completely reformating the partition and removing all traces of the installatiuon from the boot.ini file but if anyone has any other ideas that are easier I would like to know.
I installed Windows XP Pro over my Windows XP home a few days ago. My Windows XP Pro seemed to be working fine except it didn't feel or acknowledge my built in speakers and various other hardware. My dad said this might stem from the fact that the Windows I have (being from 2001) is older than my laptop. He suggested I DL the service pack onto on desktop computer, put it on a disk and open it on my laptop and install. I did that, and everything seemed to go fine until I restarted my PC as I usually do when I install new software. My laptop told there had a been a error that Windows was failing to boot properly due to some failed installation of software or failed hardware installation. It had a few options like "start with the last known configuration of windows that worked on your computer" so I did that. And I tried the other options too. But after a few screens of the usual booting up stuff my laptop just goes to a black screen and I can't get away from it. Windows Support won't help me so I'm asking you guys.
View 3 Replies View RelatedThe moment I loged in and reboot. I bumped into the unbootable stage again. However, this time the repair feature did not work and I ended up having to do a re-install. So now I'm stuck with this:I've tried running eveysingle usable option in the repair window but none worked. I've even tried replacing the BOOTMGR via CMD in the repair window with the Windows Vista Disc but still nothing.And whenever I try to do the install, once it gets to the last step. It tells me something like this:"Cannot move onto next steop, issue doing the install blah blah blah. Windows will not restart something something."
View 5 Replies View RelatedThis pc is normally running on windows xppro sp2. when i tried to upgrade to winxp sp3, the pc works well on the initial installation procedure. But after the first reboot during installation process,it won't go through the windows environment, but instead repeats what it started.But if I try to take out the installation disk of windows, it seems that it was not installed with windows.No system files being copied.
View 1 Replies View RelatedI installed a Light Scribe CD/DVD RW Optical Drive on my Alienware computer. When I booted it up, it took about 7 minutes to complete. Normally it takes about one minute. Does anyone know why it now takes so long for my computer to boot up?
View 8 Replies View RelatedI was overclocking my cpu cause i replaced the stock fan with a cooling system and while i was overclocking i got a blue screen. So, i rebooted my comp and it says a file is missing or corrupt ( forgot what file something windows/system/config) and told me to repair it. and it wont let me use my windows xp disc. I set my cd-rom to 1st priority, im posititve my cd drives work, and the cd has only been used twice so im pretty sure it cant be that.
View 1 Replies View RelatedI have started to rebuild my desktop as it has become slow. I purchased the PC with windows XP professional and have the sticker in on the box with the license key. However, I used a Windows Genuine Advantage Kit for Windows XP professional disk to rebuild. When it asked me for the Product Key I entered the code on the chassis but it says this is not valid. I received an email with the Product Key for WGA disk but I do not have the email anymore with the yellow product key although the WGA box does have the Certificate of Authentication on it.c, how do I get another copy of the email with the Product key or get to a point where the product key.
Thanks
Basically today I bought a 250gb hitachi sata HDD, dvd drive and computer case, got home, assembled the lot. worked fine. Got my Win XP SP2 installation cd and stuck it in the drive... and started to boot it up... it read the disk just fine, but for some reason every damn time it gets to (Mylex EXR2000, 3000/AR160, 170, 352 Raid Controllers) at the bottom of the screen it just stays there and never progresses.
It's causing me so much hassle. I went into the BIOS, turned off all RAID related options since he doesn't even have a RAID. Then that did nothing, figured I would get rid of the SATA drive for now incase that was the issue, put back in the old IDE 20GB drive... same thing happened. Got another Win XP installation disc that i've used loads of times with no problems... but that one came with it's own error.... a missing file apparently? Anyways the PC is sat downstairs with the old 20GB IDE drive in it and the CD drive and not much else really. All raid options in the BIOS are disabled and my mind is falling to pieces.
I recently Installed windows sp sp3 on my dell laptop and after i restarted the computer i found that i am stuck in a boot loop! i cannot boot to anything not safe mode or last known good config. Everytime it boots to normal windows, it gets to the boot screen scrolls across once and then stops and shows a blue screen for about a second, not enough time for me to see, and then it reboots and repeats the process. I have been able to see the bsod because of disabling the auto restart and it showed this stop : c0000221 unknown hard error systemrootsystem32 tdll.dll. When i boot into safe mode it gets to the agp440.sys or whatever it is then restarts.Now im pretty sure this is a common problem with sp3 installs, but isnt that normally on amd machines where you have to disable intelppm. Im running a dell with a pentium 4 m processor so it cant be that.
View 2 Replies View RelatedI am running Windows XP Professional and it came up with that message Disk Boot Failure: INSERT SYSTEM DISK AND PRESS ENTER when i turned on the computer. In my bios it is set up to CD is first boot and HDD is second I dont have a floppy drive and only 1 hardrive...I do not have the original windows xp pro installation cd, but I do have a full unused version of windows xp home edition installation cd and I put that in and booted off of that it started loading up like its supposed to then I got to the screen that said to start installing windows xp press enter so i did that then it went to the agreement thing and said press f8 to aggree to these terms i did that and it braught up a new screen saying
View 11 Replies View Relateda friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
I've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies View RelatedI need to install Windows XP Pro on my laptop. Currently it has Vista. Some people are selling these installation CDs (and keys) on ebay. Can I buy it from there?
View 6 Replies View RelatedWhenever I try to install something, the window that shows thats its installing closes and installation stops. I restart the install, but it keeps on closing and at different times.
View 6 Replies View RelatedI am trying to install SP3 on a Windows XP Home (currently SP2). The installation is hung on "Finishing Installation - Performing cleanup". I downloaded the installer from the MS Download center (it didn't appear in Windows Update). Is it safe to turn off the computer (since I can't close the installer), or should I let it sit for a while longer (it's been hanging for a few hours)?
View 2 Replies View RelatedI am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View Relatedfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedHow can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedRecently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
View 2 Replies View RelatedIn performing a clean installation of Windows XP is it best to install the microsoft updates first once you've downloaded them from the Microsoft catalog? For instance Microsoft updates, Chipset drivers, Video drivers etc.
View 3 Replies View RelatedI tried to install XP Pro SP2 on my laptop and somehow my product key was no good. I first reformated my hard drive and Windows installation begun but I had to get out since the product key was invalid.I finally noticed I had the wrong disk. When I finally found the right disk with the right key, the old installation kept on coming back where I left it. How can I start all over again, with the reformating and reinstallation from scratch? I really don't know how to do this. Is there a special command at reboot? Do I have to put the CD in or not? I'm not sure anymore since it's been years since I've tried this.
View 14 Replies View RelatedBoth my friend and I had modem shutdowns upon installing SP3. My computer kept telling me my modem was defective (bought three more before it occurred to me that my computer was LYING to me).
View 6 Replies View RelatedFirstly, I currently have Vista installed, and wanted to install XP again. How can I approach this while achieving dual boot features? Second, if the only way to get dual boot is to reinstall XP and then Vista, how do I do it because my computer only came with Vista restore disks.Third, if I do reinstall Xp then Vista, what is the easiest way I can literally take my computer the way it is, all programs, documents, settings, etc... and then bring it back after I do a clean install. I currently do have a 60gb external hard drive as well.
View 12 Replies View Related