An employee of mine noted that Symantec Anti-Virus quarintined some type of virus. After this he ran Spybot Search & Destroy which also found and quarintined something. Unfortunately, these are the only details he could provide. After running Spybot he restarted his computer and received the blue screen of death. STOP:c0000135 {unable to locate component} Application failed to start b/c user32.dll not found.
View 12 RepliesWhen I start my computer I get a blue screen that says, Is delete program not found - skipping Autocheck. Not sure if it is a I or 7 in front of the delete but either way after that the system starts normally. How do I get rid of that blue screen warning?
View 2 Replies View RelatedCan somebody plz help my friends laptop does not load up after the windows xp loading screen it goes to a blue screen saying:Stop:c0000139 {entry point not found}.The procedure entry point I_rpcexceptionfilter could not be located in the dynamic link library RPCRT4.dll.there is no cd recovery or no partional drive on here to do a system recovery. as i know anyway as i have looked.
View 2 Replies View RelatedWhen i start up my computer and log into windows 2000 pro. before the desktop even has a chance to load up this error message pops up ENTRY POINT NOT FOUND>>"procedure entry point ?__U@YAPAXI@Z could not be located in the dynamic link library msvcrt.dll" also at various times an error message for "Javaur32.exe has generated errors and will be closed by windows, you will need to restart the program" will pop up. the worst part about this whole problem is that when i try to open any of the folders on my desktop an error message "explorer.exe has generated errors and will be cloased by windows, you will need to restart the program" will pop up and my desktop will go blank for a few seconds then come back, basically the only program i can run is Aol on my laptop right now.
View 2 Replies View RelatedEvery time i try to run this application (red alert 3) i receive this error message...
ra3_1.0.game-Illegal System Dll Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. the relocation occured because the DLL C:WINDOWSsystem32SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL
I have read through this post, and various others on different sites, and i have had no luck fixing the problem.
http://forums.techguy.org/windows-nt...l-probelm.html
I have Windows xp sp2 with an AMD based computer. The model is a Compaq presario SR1200NX. I visited this website http://msinfluentials.com/blogs/jesp...ng-xp-sp3.aspx and ran the tool to confirm that i had one, and i do. Now i want to run the tool and disable whatever it wants me to disable and install SP3, but ive had a past problem where i replaced the system file user32.dll and it led to a repeating reboot. i fixed it with some tool on the computer when you boot called the recovery console and i got the file back. When i got the computer to boot it looked like this http://img155.imageshack.us/img155/3894/pictuer.png (notice everything is themed except for the taskbar i have no idea why the hell thats happening) i made a few changes so i could use custom themes, and theres also a few user32.dll files scattered in the Windows folder but with different names ( i did that when using the recovery console).
View 8 Replies View RelatedWhat does this mean?This message showed up today when I was trying to start the calculator!The same thing happened when I started Nero Express calc.exe Illegal System DLL Relocation.The system DLL user32.dll was relocated in memory. The application will not run properly.The relocation occurred because the DLL C:WINDOWSsystem32SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.I tried to reinstall nero but the same message appear.
View 11 Replies View RelatedI have been trying to fix an issue with a friends computer. Problem is I'm not very computer savvy :S So that's where you all come in :P I do have some knowledge of computer's and usually catch on pretty quickly. Basically I have been noticing my friends comp has become increasingly slow over the last week I have scanned with AVG and found a change in the following:
Shell32.dll, kernel32.dll, hosts, user32.dll, ntoskrnl.dll
I have tried searching for the shell32.dll and found it only to be in the C:/windows/system32 folder as someone recommended in another post I had read on here..Those are the only items showing in a complete scan of the system so I have no idea what is causing this..Also she has been noticing an increased amount of pop ups even when explorer is not running? I believe they are CID or CDI pop ups.
I am getting this error more and more frequently with setup programs, as well as a handful of other programs that I used to be able to run with no problem. The problem is preventing the programs from running. Here is the error dialog I receive every time;
Quote: setup.exe - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. the relocation occured because the DLL C:WINDOWSsystem32SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL
I need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
View 1 Replies View RelatedMy Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
View 14 Replies View Relatedso every time i boot the computer i get that good ol' blue screen of death right where windows should open to my desktop.. instead it says "welcome" with the light blue background.. the screen goes black and then comes back with the blue screen.. the message on the screen says:
stop: 0x0000007a (0xe16dac70, 0xc0000185, 0xbf985c66, 0x20e18860)
win32k.sys - address bf985c66 base at bf800000, datestamp 41107f7a
beginning dump of physical memory dumping physical memory to disk: and counts up to 100 then the computer restarts. i was able to get into safe mode to try a system restore but when the computer restarted it never finished the install (it actually gave me the confirmation that the restore was successful while i was doing a repair install later on) i have tried going through the windows install disc repair utility and doing a chkdsk /p and a chkdsk /r upon doing /r it froze at 53 percent and did not move (i left it for a good 4 hours the first time before restarting it.. and then over night the second time.. and both times it never passed 53 percent............
I keep getting this annoying "Page Not Found" screen. Regardless of what I seem to do, when I click to go somewhere I seem to get this.
View 6 Replies View RelatedWhen starting my computer, I have started getting a "Hard Drive Not Found" error on the black screen just as the pc starts booting up. I've not written down all the details, but I see the MAC address displayed and a cursor blinks just after the letters DHCP, there is something about "boot filename not received", then "Hard Drive not found" and then it defaults to the Windows boot screen and will boot up fine. The pc seems to run normal once up...but, I'm somewhat concerned about a "Hard Drive Not Found" error. It just doesn't sound good. I'm going to try to get more specifics as to what I'm seeing on the boot screens, but wondered if anyone here might have some suggestions as to what my issue is?
My pc specs should show in my signature. Also, I recently upgraded my graphics card, but that's the only hardware I've been playing with lately. Don't know if that would make any difference because I wasn't getting any trouble until now and that graphics card has been in about a week already.
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies View RelatedWhen i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies View RelatedI was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies View RelatedEncountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies View Relatedi'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies View RelatedMy dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies View RelatedI couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies View RelatedI have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
When I turned my computer on this morning it starts up but when it gets to the boot screen it gives me a blue screen but my computer instantaniously restarts so i have no idea what it said. What should I do I'm using ERD Commander 2005 and that let me boot into my computer but its limited I've never used ERD Commander before I've tryed a few things but nothing has worked yet
View 6 Replies View RelatedI also have a Blue Screen with the words Spyware Infection. Listed below is a copy of my HijackThis log. Can someone please help me with a fix?
View 10 Replies View Relatedwhen I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies View RelatedWhat it did here was change the background and set the screensaver to the sysinternals bluescreen screensaver (which you may be seeing) while at the same time setting policies in the registry to disable the two aforementioned tabs in the Display properties window
View 1 Replies View Related