System DLL User32.dll Is Relocated?
Jan 3, 2009
Every time i try to run this application (red alert 3) i receive this error message...
ra3_1.0.game-Illegal System Dll Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. the relocation occured because the DLL C:WINDOWSsystem32SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL
I have read through this post, and various others on different sites, and i have had no luck fixing the problem.
http://forums.techguy.org/windows-nt...l-probelm.html
View 2 Replies
ADVERTISEMENT
Oct 31, 2007
What does this mean?This message showed up today when I was trying to start the calculator!The same thing happened when I started Nero Express calc.exe Illegal System DLL Relocation.The system DLL user32.dll was relocated in memory. The application will not run properly.The relocation occurred because the DLL C:WINDOWSsystem32SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.I tried to reinstall nero but the same message appear.
View 11 Replies
View Related
Dec 20, 2005
When i start up my computer and log into windows 2000 pro. before the desktop even has a chance to load up this error message pops up ENTRY POINT NOT FOUND>>"procedure entry point ?__U@YAPAXI@Z could not be located in the dynamic link library msvcrt.dll" also at various times an error message for "Javaur32.exe has generated errors and will be closed by windows, you will need to restart the program" will pop up. the worst part about this whole problem is that when i try to open any of the folders on my desktop an error message "explorer.exe has generated errors and will be cloased by windows, you will need to restart the program" will pop up and my desktop will go blank for a few seconds then come back, basically the only program i can run is Aol on my laptop right now.
View 2 Replies
View Related
Jul 23, 2008
An employee of mine noted that Symantec Anti-Virus quarintined some type of virus. After this he ran Spybot Search & Destroy which also found and quarintined something. Unfortunately, these are the only details he could provide. After running Spybot he restarted his computer and received the blue screen of death. STOP:c0000135 {unable to locate component} Application failed to start b/c user32.dll not found.
View 12 Replies
View Related
Jun 13, 2010
I have Windows xp sp2 with an AMD based computer. The model is a Compaq presario SR1200NX. I visited this website http://msinfluentials.com/blogs/jesp...ng-xp-sp3.aspx and ran the tool to confirm that i had one, and i do. Now i want to run the tool and disable whatever it wants me to disable and install SP3, but ive had a past problem where i replaced the system file user32.dll and it led to a repeating reboot. i fixed it with some tool on the computer when you boot called the recovery console and i got the file back. When i got the computer to boot it looked like this http://img155.imageshack.us/img155/3894/pictuer.png (notice everything is themed except for the taskbar i have no idea why the hell thats happening) i made a few changes so i could use custom themes, and theres also a few user32.dll files scattered in the Windows folder but with different names ( i did that when using the recovery console).
View 8 Replies
View Related
Apr 12, 2008
I have been trying to fix an issue with a friends computer. Problem is I'm not very computer savvy :S So that's where you all come in :P I do have some knowledge of computer's and usually catch on pretty quickly. Basically I have been noticing my friends comp has become increasingly slow over the last week I have scanned with AVG and found a change in the following:
Shell32.dll, kernel32.dll, hosts, user32.dll, ntoskrnl.dll
I have tried searching for the shell32.dll and found it only to be in the C:/windows/system32 folder as someone recommended in another post I had read on here..Those are the only items showing in a complete scan of the system so I have no idea what is causing this..Also she has been noticing an increased amount of pop ups even when explorer is not running? I believe they are CID or CDI pop ups.
View 6 Replies
View Related
Jul 15, 2007
I am getting this error more and more frequently with setup programs, as well as a handful of other programs that I used to be able to run with no problem. The problem is preventing the programs from running. Here is the error dialog I receive every time;
Quote: setup.exe - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. the relocation occured because the DLL C:WINDOWSsystem32SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL
View 14 Replies
View Related
Mar 23, 2010
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies
View Related
Jun 10, 2008
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
View 14 Replies
View Related
Jun 8, 2006
i have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
View 5 Replies
View Related
Oct 14, 2007
The system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
View 9 Replies
View Related
Aug 10, 2010
On reinstalling my Windows XP x86 and using Windows Update to get everything back uptodate to the present day. I am having serious problems getting my sound drivers to install. I have tried everything under the sun, also tried a few things which i found while roaming the internet (Mainly google searches for the problem).
View 6 Replies
View Related
Jul 17, 2005
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
View 10 Replies
View Related
Aug 19, 2009
I shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
View 7 Replies
View Related
Jun 15, 2007
Some time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
View 10 Replies
View Related
May 26, 2008
i rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
View 3 Replies
View Related
Jun 8, 2006
I am trying to use the system restore function on windows XP, but every time i select a restore point and the system reboots, it says that the restoration was incomplete and "no changes have been made." I have tried multiple restore points. Microsoft.com suggested that i verify that the task manager, WMI, and system restore services were running, and they are. I also tried disabling my antivirus program, but the same thing happens.
View 9 Replies
View Related
Apr 29, 2010
Had problems with virus, couldnt update Virus or Malware Protection. I did full shred System Recovery from partition ( HP- A1130N -Windows Media Edition- Version 2002 Service Pack 2. Dowloaded AVG Virus and ran scan, all OK.Went to MS Dowload center and downloaded and installed 87updates to include IE8,started computer, all OK. Then updater said needed to download SVC Pack 3- took a loooooooooooooong time. THEN COMPUTER WOULDNT START- tried the two options it gave me but no go back to same black screen with boot options-- regualar- last working point- safe mode etc. no go.
At this point I did a full System Recovery again and downloaded virus protection again.
View 14 Replies
View Related
May 10, 2010
I'm running a Dell XPS 600 with Windows XP Professional Media Center Edition. Well, OK, it's not really running.I used System Restore to return my PC to a point about six weeks ago when the system was more stable. The PC rebooted, and now it won't boot any more due to a missing/corrupt CONFIGSYSTEM file.It won't boot from either of my CD drives, either. I've used the boot Setup to alter the boot sequence but that doesn't help, the system just doesnt recognize those drives during boot. For this same reason, I've been unable to access the Recovery Console.
View 5 Replies
View Related
Sep 1, 2005
When i startup my computer i get this message.."WIndows cannot start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEM"
View 3 Replies
View Related
Aug 14, 2007
I have a laptop, a Dell latitude d610 that says:Windows could not start because the following file is missing or corrupt: windowssystem32configsystem I attempted to try the fix listed here:http://support.microsoft.com/kb/307545 but when I went to copy using the command: copy c:windowssystem32configsystem c:window mpsystem.bak into the tmp directory I created it said: File could not be copied.
View 4 Replies
View Related
Aug 4, 2010
So i booted my t400 ibm laptop and this error message popped up as stated in the message title.My harddrive is in achi mode and i was wondering if i switch the harddrive mode and do a repair with an xp cd, will i lose any files?
View 1 Replies
View Related
Jul 26, 2005
Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM This is the error message i have. I have a copy of windows xp pro. i have no backup disk.
View 13 Replies
View Related
Jun 15, 2005
I have a Windows XP Pro box (named Shadow) with shares set for the root of each drive. I also have one external USB drive J:. I have used the Disk Manager, Add drive letters, to mount this drive as G:Shadow-J. I have set share for G:Shadow-J as Shadow-J. (I use this mount point approach to avoid the problem with the NET SHARE disappearing from J: when I turn off the drive.)From another machine, either one running XP Pro or a laptop running XP Home, I do NET USE for five different shares on Shadow. NET USE works fine for the shares for Shadow hard drives (C:, E:, F:, G but fails with error 1130 "Not enough server storage is available to proceess
View 1 Replies
View Related
Jun 22, 2005
I am trying to do a system restore and my system runs it all but when all is done I get a message saying that no changes have been made to my system and that the system restore was unsuccessful. The reason I am trying to restore my system is because Photoshop is suddenly unable to save as a jpeg? It doesn't recognise the jpeg format when saving and saves as a Photoshop document. THen it wont recognise the file to open it. I have uninstalled and reinstalled the program to no avail. Funnily enough photoshop elements has no problem with it.
View 5 Replies
View Related
Aug 12, 2002
By default, Windows XP keeps a backup of system files in the System Volume Information folder. This can eat up valuable space on your hard drive. If you don't want Windows to back up your system files:1. Open the Control Panel2. Double-click on system3. Click the System Restore tab4. Check "Turn off System Restore on all drives"5. Hit Apply6. You may now delete the System Volume Information folder.Warning! If you turn this off you will not be able to use Windows System Restore to restore your system in case of failure.
View 9 Replies
View Related
Dec 27, 2006
after copying win xp setup files n re-starting i get this message "system manager initialization system process terminated unexpectantly with a status of 0x000026c, the system has shut down" need explanation and help to resolve this issue thanx.......also note, winxp was installing on the same hard drive just fine on another motherboard so.........could the M/B be the prob?
View 6 Replies
View Related
Aug 11, 2009
It says windows can't be started up because windowssystem32configsystem is damaged or can't be found.I already tried bootcfg but doesn't make any differnce.
View 9 Replies
View Related
Dec 15, 2008
When I start the laptop, the first black screen loads, and then directly skips to an error message saying "Windows cannot start because the Windows/system32/ config/system file is either corrupt or missing." Then it prompts you to try to load Windows using the installation CD.which I do not have! Whoever's reading this, PLEASE please help me, the laptop's like, my life, and I haven't had the common sense to back up anything
View 12 Replies
View Related
Feb 14, 2008
It did not come with Windows installed, but came with the Windows SP1 disc and drivers and such. I installed all those, and was off to a great start. But a few hours later, I discovered I couldn't open System Restore, System Information, or Windows Media Player. Since these are all applications that come with Windows, I figured I must have messed up the installation. Being on moderately knowledgeable about computers, many times, my solution is to simply reinstall a program. So, I figured, I have this installation disc still sitting here from just a few hours ago, why not just give it another go?
View 6 Replies
View Related
Jul 7, 2005
The my computer window instantly opens with all the correct icons displayed on the lest (view system information add remove programs change a setting...) but it shows no drives and I cannot click on anything. If I hit control alt delete it is reported as not responding but after about 45 seconds the rest of the icons show up. I open control pannel and try to open the system folder and nothing happens. I tried running nortons system works windoctor but after the cd launches it freezes. After about 3 hours of working on it I gave up and reinstalled windows ( i did the windows repair so I didn't lose program files and such, i did not re-initialize). After re-installing everything was going fine until last night. The same exact thing is occuring again. Ive attempted running Ad-aware and its locking up after it finds a few files, I have no clue what its finding since its locking up. Ive tried booting in safe mode but it locks up at mup.sys. Their is also no internet connection IE or Firefox can find but when I open the network connections folder it says that I am connected. Im wondering if its a bad HDD or if I've got some delayed action virus or something. Neither seems to likely to me since if it was the HDD when i ran a HDD scan (in dos from the win repair cd) it comes across as fine and the virus would have to be a delayed action one or something since it keeps hitting almost exactly a week after the problems occur.
View 7 Replies
View Related
