Computer shut down incorrectly. Will not enter Windows even in safe mode. Flashes XP logo then flashes blue screen then will start over.Beginning dump of physical memory Physical memory dump complete.Contact your system administrator or technical support group for further assistance.
View 6 RepliesI got a problem
I use a developer program to make executables (hobby of mine saves me going troppo) called Clarion, it works OK, I made a DOSable program with it, it works OK.
Once I could open to full size DOS screen by pressing the Alt+Enter keys and it would stay open until I was finished with it, then I could revert back to a small screen by pressing Alt+Enter keys again.
Now if I press Alt+Enter keys the DOS screen appears, but it stays open in full screen for a couple of seconds then automatically closes back to the usual small screen.
I have tried right clicking on the icon, properties, screen and putting a dot in the full size option, but this does not work.
I have scanned my PC for viruses etc but no joy there.
I have Dialup only, so don't ask me to do a Panda or Trend scan as they drop you if you no got broadband.
I'm using XP pro, 512meg ram, using a Gigabyte MB, and Nivida video card.
XP working OK-dokie, sound ok-dokie, video ok-dokie, screen to DOS wonkie.
how to fix this?
Every time I boot up to XP Home Edition, the My Documents Folder opens automatically on screen. Don't know why as I rarely access the folder.
View 2 Replies View Relatedthe Windows Installer screen opens telling me it is trying to install a program that is already installed,(usually driver for HP 4110 printer drivers). If I don't cancel it immediately, eventually an error screen appears telling me the file I'm seeking is not available and to insert the installation CD. I've tried re-installing the drivers by inserting the CD, but then an error message appears saying the drivers are already installed. This is getting frustrating?
View 4 Replies View RelatedI need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
View 1 Replies View RelatedMy Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
View 14 Replies View RelatedWhen i select "system restore" from system tools,i get a blank screen. How do i restore system xp home edition?
View 6 Replies View Relatedso every time i boot the computer i get that good ol' blue screen of death right where windows should open to my desktop.. instead it says "welcome" with the light blue background.. the screen goes black and then comes back with the blue screen.. the message on the screen says:
stop: 0x0000007a (0xe16dac70, 0xc0000185, 0xbf985c66, 0x20e18860)
win32k.sys - address bf985c66 base at bf800000, datestamp 41107f7a
beginning dump of physical memory dumping physical memory to disk: and counts up to 100 then the computer restarts. i was able to get into safe mode to try a system restore but when the computer restarted it never finished the install (it actually gave me the confirmation that the restore was successful while i was doing a repair install later on) i have tried going through the windows install disc repair utility and doing a chkdsk /p and a chkdsk /r upon doing /r it froze at 53 percent and did not move (i left it for a good 4 hours the first time before restarting it.. and then over night the second time.. and both times it never passed 53 percent............
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies View RelatedWhen i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies View RelatedI was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies View RelatedEncountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies View Relatedi'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies View RelatedMy dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies View RelatedI couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies View RelatedI have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
When I turned my computer on this morning it starts up but when it gets to the boot screen it gives me a blue screen but my computer instantaniously restarts so i have no idea what it said. What should I do I'm using ERD Commander 2005 and that let me boot into my computer but its limited I've never used ERD Commander before I've tryed a few things but nothing has worked yet
View 6 Replies View RelatedI also have a Blue Screen with the words Spyware Infection. Listed below is a copy of my HijackThis log. Can someone please help me with a fix?
View 10 Replies View Relatedwhen I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies View RelatedWhat it did here was change the background and set the screensaver to the sysinternals bluescreen screensaver (which you may be seeing) while at the same time setting policies in the registry to disable the two aforementioned tabs in the Display properties window
View 1 Replies View RelatedRecently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
This moring when I turned on my laptop a '0x00000051 (0x00000001, 0xL1, 0L008, 0x00716000, 0x000001D6)' Registy Error appeared on a blue screen. It then continuously restarts, never making it to the logon screen.
I have tried to reboot in Safe Mode and 'Last Known Working' mode but the same blue screen appears. As I dont have a XP Home install disk (only boot disk supplied with laptop), I could not repair my registry so I have installed a parallel version of Windows XP Pro that came with another PC. I can access the hard disc so I will be able to back up most of my files BUT I cannot access the Documents and Settings of my user from the original OS because I selected 'Make this Folder Private' when I made the account. Does anyone know of a way to disable the 'Make This Folder Private' option on an account that is on a parallel version of XP?
The issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
View 11 Replies View Relatedi just recently reinstalled windows xp on an old computer i had become corrupted and i had to reinstall it and now it boots up fine but during the loading screen it goes blue screen idk ive tried to reinstall the os again and still the same any advice it an hp pavilion 514c
View 1 Replies View RelatedI'm runnin XP in a Dell laptop. Recently the screen was flipped upside down using the ctrl-alt-arrow keys. Using these keyes did not reverse the screen flip. Now when the laptop is rebooted it goes through the normal boot process (except for the screen being flipped) but it goes to a blue screen immediately after the desktop icons finish loading. The stop message reads: *** STOP: 0x0000008e (0xc0000005, 0x804d9da8, 0xedfd098c, 0x0000000). The safemode boot works fine. I'll try updating the video driver.
View 3 Replies View RelatedWhen I switch on my computer it loads to the windows XP welcome screen then changes to a blue screen. I can't read what information is on that blue screen as the computer re-boots and starts the cycle again. I've tried starting in "safe mode" and "last good figuration that worked".
View 5 Replies View Related