I was told by Lenovo that one slot will accomodate 1 gig of memory, instead of using 2 half gig sticks.I was also told about something called "memory boost" as an external memory source to increase memory. has anyone heard of this? I want to run PhotoshopCS and need 1 GIG of memory and don't want to get new motherboard(the machine is long out of warantee).
View 1 RepliesMotherboard Epox EP 8KDA 3J
OS XP SP2 Home E
AMD 3000+ CPU
Memory Upgrade
Original setup Had two 256 Rosewill DDR400
one open slot
INSTALLED 512m ampo D400 35145588-P-R
Into Slot #1
PC Ran OK with 512 Ram
Installed one of the Rosewill DDR400 256
into Slot #2
PC Ran OK with 768 Ram
Installed Rosewill DDR400 256
into Slot #3
PC would not Boot
Does not seem to recognize 3rd Slot
when i plug in a usb 2.0 device into any of the slots, it works perfectly for a while, but then i hear that 'usb device unplugged' sound, followed by 'usb device plugged in' sound. after that, the transfer speeds become miserable, which is why i assume it switches to usb 1.1. i'm using win xp pro sp2 and latest ati drivers for the southbridge
View 4 Replies View RelatedThis is the strangest thing I've seen in the past 10 years of using computers. I have an Acer Aspire 7535-5020 laptop that came with windows 7, but I'm very picky and I wanted Windows xp back so I went onto Acer's website and downloaded all of the windows xp drivers and then formatted the laptop to Windows XP with intergrated Service Pack 3.The computer works just fine except for one very strange oddity - the USB mouse I'm using only works when plugged into the first USB slot, it will refuse to work in the other 3 USB slots.I'm using a Microsoft Intellimouse Explorer 3.0 USB which is my favorite mouse and I have 3 of them at home. When I was formatting the laptop
View 3 Replies View RelatedI have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
View 11 Replies View RelatedI have a brand new Toshiba Satellite A85-S107. 40 gig harddrive. 1.4GHz processor. 256 megs ram.
A system check using MSinfo32 indicates that I only have 16 megs ofavailable physical memory and only about half of the 512 mb virtualmemory available. The shared video card takes the RAM down to 191 megs. Even when I disable every single file under Startup (msconfig)it only raises the available memory to about 26 mb. So, with virtually nothing running I have about a 75 percent memory load. Can this possibly all be attributed to Windows XP?
I realize there are other processes running in the background but I am not sure how and what to do about them. And virtualy all of them seems to be windows files. Should I just add another 256 mb of ram and not worry about it?
I have been getting the blue screen of death on my Dell Inspiron 600m running Windows XP Home Edition Version 2002 SP2 w/ Intel Pentium M processor 1600 MHz 299 MHz, 1 GB of Ram (only hardware not factory - installed recently). I was given this laptop as a Christmas gift as the donor received a new one on boxing day It was given to me with this error and I suspect it is from the new(er) memory installed but cannot be certain as I have no references to go on. I had enough of this reoccurring error very quickly so I reinstalled the OS clean and fully updated the system with Microsoft updates including SP2, the computer also has quite a bit of expensive software I installed and is virus free according to trend micro IS PC-cillin 2007.The memory that came out of this unit is in with the laptop bag stored in the new memory packaging, the new memory is: Times Two(2) units = KTD - INSP8200/512 (512MB Memory Module) Equiv. Dell(R) P/N: 311 - 1356 (Sodimm DDR Inspiron) whatever that means! The old memory that was removed says: Again Times Two (2) units = Infineon HYS64D32020GDL-7-B 32M x 64 SDRAM - B2V40212332G - PC21000S-2033-0-A1 - 256MB,DDR,266,CL2
View 14 Replies View RelatedI am working on a Dell Inspiron 8200 Laptop.The first problem was a blue screen that said:Quote: STOP: c0000218 {Registry File Failure}The registry cannot load the hive (file):systemrootsystem32configsoftware or its log or alternate It is corrupt, absent, or not writable.Beginning dump of physical memory
Physical memory dump complete.Contact your system administrator or technical support group for further assistance I fixed that by going into the recovery console and replacing:C:windowssystem32configsoftware C:windowssystem32configsam.bak
C:windowssystem32configsystem.bakC:windowssystem32configdefault.bakC:windowssystem32configsecurity.bakwith the one in the C:windows epair directory
When I boot my Dell Inspiron 3800 laptop I get an error message. The background is black and in white text at the top of the screen it reads, "Memory write/read failure at 10000000 read 00ef02ee expected before 00ef00ef decreasing available memory. Does anyone out there know what this means or how to fix this?
View 1 Replies View RelatedI am trying to upgrade the RAM memory on my Gateway MX3230 notebook. It presently has 256 MB and I would like to upgrade to 1 GB. I have checked the Gateway website and and upgrade to 1 GB is acceptable. I purchased a memory module from Kingston which was listed as being compatible with my laptop. When I tried installing the module, the computer will not start, nothing but black screen. It's as thought there is no memory at all. I tried re-installing the module making sure it was inserted in as far as it will go, still no luck. There is no settings in bios that I can see that would prevent the acceptance of this module
View 3 Replies View RelatedThe IEXPLORE.EXE still reside im my PC memory after I close the IE window.
With task mamanger, I can see there are many IEXPLORE.EXE running. But, I already close all of them.
I ran 3 ad-ware, spybot, MS antispyware. Removed all the spyware by those 3 spyware detector.
I am using Intel pentium 4 cpu 2.40GHz, 1.25 GB RAM. Iam using 80 GB samsung hard disk.
I installed Microsoft Windows XP Professional service pack 2 on a drive of 10 GB memory space with NTFS file system.
After the installation of Win XP, the drive properties shows 4.9 GB of used memory and only 4.45 GB of free memory, but when I try to find total memory occupied for all the files in that drive (using "select-all" and properties) the used memory is only 2.3 GB only.
Now I don't understand the huge difference of this memories calculations. Where that extra used memory gone, when the total memory occupied by all the files is much less.
why my Windowx XP sees only 1024 MB memory while I've increased the original memory of 512 MB by 2x 512 MB ?My motherboard has three DDR-slots. It had from the beginning a Kingston K 512MB PC2700 module in slot #1. This week I've added two Kingston K512 UDIMM 512MB PC2700 modules in the slots #2 and #3.All three modules has the type name KVR333X64C25/512, so I thought they would be compatible.
View 5 Replies View RelatedI am running Windows XP in a Compaq Presario, with CD reader and CD/DVD burner. My question: How do I get a DVD(with photos and sound) onto a Flash Memory stick or an SD card??
View 3 Replies View RelatedI have a white box Pentium 4 CPU with XP professional service pack 2 build 2600 installed. The motherboard is an intel D865GLC with 512 MB RAM installed in Dual channel mode with 1 256 MB stick of ram in slot zero of bank 1 and 1 256 MB stick of ram in slot zero of bank 2. This memory is dual channel compatible. I tried to add another 2 sticks of the same type ram but from a different manufacturer.
Here's the problem: I can use any 2 of the 4 sticks of ram together, both from the same manufacturer or 1 from 1 manufacturer and 1 from the other for a total of 512 MB. Everything works fine. I can place one stick in slot 0 of bank 1 and the other in slot 0 of bank 2 or I can place 1 in slot 1 bank 1 and 1 in slot 1 of bank 2 with no problems. I can even place a 3rd stick of the same type ram in any open slot and all's fine (except the machine complains that this is not an optimal memory setup). Memtest86 reports no errors with any of the above configurations
I was running Outlook, AIM, and IE at the same. After a few moment, I'd get this following message:
Your system is low on virtual memory. Windows is increasing the size of your Virtual Memory Paging file. During this process, memory requests for some applications may be denied.
When I hit OK, all my applications would close, except my Outlook. I'm running Win2K with 512 memory. My computer is only 1.5 years old. I didn't play any games or download anything so it's not heavily used. But why the message then?
I don't really have a problem on my hands, but I would like to ask a few questions relating to Virtual Memory and Memory Leak.
I downloaded a game back in December, but hasn't been installed as yet. I heard that it is created using "C++" or "C" (whatever it is), and I learned that it has a memory leak. My Virtual Memory was running low (it may already have beforehand) by the time the game was installed. My computer crashed two days later as a result.
But some users haven't experienced any problems with the game. My question is, is it a better idea for me to install the game on a CD-ROM or USB Drive and play it from that media type (instead of from the hard drive) so that I can protect my PC from crashing due to low virtual memory?
virtual memory and memory usage i need to know how to know this 2 perfomances and if we need to otuch something to upgrade memory and best usage for your pc.
View 5 Replies View RelatedI have a Ecs P4vxasd Motherboard, Pga socket 423. The mainboard accomodates 2 DDR 184 pin 2.5v + 2 SDR 168 pin 3.3v Dimm sockets with a total capacity of
etting various blue screen errors, to go along with several reloads. I downloaded a memory diagnostic program from this site. My computer didn't pass the test, so I removed on stick and it passed this time. I assumed that the memory stick was my problem, and ordered a DDR 512 mb pc3200 stick from Curcial.com. I installed the new memory and got the same error from the diag. test. I began swapping memory around. all three sticks worked fine by themselves in either slot, but put two together & I would get a bad diag.
anuyone ever seen this problem or know how to what is the cause of it or where it came from, and how do we fix it?
View 1 Replies View RelatedI have a advent 9515 laptop and i have lost my recovery disc can any 1 tell me where to get a copy of it that dose not cost a bomb cause i have a virus on my laptop and need the disc.
View 1 Replies View RelatedI keep getting the error message that my Windows virtual memory minimum is too low. I have Microsoft Windows 2000 and the following settings: total paging file size 205 MB; minimum 2 MB; Recommended 190 MB; Currently allocated 205 MB; current registry size 21 I'm not the system administrator so I can't change these numbers. I also couldn't find the pagefile.sys that someone suggested looking for. My IT guys don't know what's wrong; they reformatted my computer but I got this error message again. What should I tell them to do?
View 1 Replies View RelatedI have 3 memory slots on my motherboard. Two of them have 512MB DDR PC2700 chips. Can I put a 1GB chip in the third slot or would it have to be another 512MB chip?
View 4 Replies View RelatedI am having major trouble with windows explorer. Microsoft doesn't even have the error on their website, at least that i can find. The error reads: "The instruction at '0xfe9ed428' referenced memory at '0xfe9ed428'. The memory could not be 'read'."
View 3 Replies View RelatedI was just playing a game I bought recently, and after I got up to the second level, the models in the game weren't rendering properly, (some of the people were invisable etc), then it froze and gave me the following errors:
First error ~
Quote: Rendering thread exeption:
General protection fault!
History: Adress =0x98aeb8 (filename not found)
Adress =0x2 (filename not found) Second error ~
Quote: The instruction '0x009d8bd2' referenced memory at 0x0000001 the memory could not be "read" After these errors occurred, my desktop reverted to 6-bit color, and the lowest possible resolution, then wouldn't let me change it back.
My laptop died and I removed the hard drive.I hooked the hard drive up to my new laptop via a SATA/IDE cable.I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive. My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
View 3 Replies View RelatedMy OS is Windowns XP. Lately while on-line, I have been getting a "virtual memory is low" error message and then my computer either locks up or I am booted off AOL. Can you tell me what might cause this type error? I have noted added any new software in weeks. The last install was my IPOD Nano.
View 2 Replies View RelatedJust got my new laptop in and now I need to transfer files off my old one to the new. What is the easiest way to do that? I have several gigs that I need to move over.
View 1 Replies View RelatedThere are 4 gigs of ram in this system. On boot, the BIOS shows 4gigs, but Windows only shows 3 gigs.It originally had WindowsXP 64 bit installed and Win64 showed all 4 gigs. The problem was some programs required didn't run on Win64.Moving the ram around from slot to slot doesn't help.Up to 3 gig it shows corectly but upon placing the 4th Dimm I still get 3 gigs reported in WIndows.I can re-install Windows easily since no data is on the machine yet.Memory settings are all at safe settings, not pushing any envelope here. With 4 Dimms it runs at DDR333.
View 8 Replies View RelatedI am experiencing low memory when I try to use a graphics program to re-size a large image (3000pixels x 2300pixels). I just installed a new 70GB harddrive on my computer and before that, the graphics program could handle this operation without any difficulty. I also just re-installed XP and downloaded all the new updates.I have 2 harddrives:1 is 74 GB, 16GB is in use 1 is 76GB, 4GB in useOp. System: Windows XP, w/ latest updates Processor: 2.09 GHz AMD 1.5GB of Ram.
View 8 Replies View RelatedI am running WinXP sp1 with 384 ram. I have a cable high speed connection, and also use AOL byoa (bring your own access). I've tried to do things to get more memory. I haven't had any error messages, but I only have 38% free space. My question is: How can I find out what is using all my memory. Can I do something to the virtual memory to increase my physical memory?
View 6 Replies View Related