Title says it all. Not sure when it actually disappeared. Noticed it while studying for A+ exam today. Here is what I have tried that hasn't worked:
(1) Missing BOOT.INI file. It is there.
(2) Registry corruption. Nope. The entry doesn't appear in the expected location.
(3) Improper permissions set on BOOT.INI. Nope. I can open it. Plus there is no Security tab in the Properties window, which raises another eyebrow of "huh?"
Boot.Ini tab missing from System Configuration Utility when log into msconfig.
View 30 Replies View RelatedThe Boot.ini Tab missing from my System Configuration Utility (msconfig.exe) Dialog Box. Everything else is OK and have all other functionality with msconfig.exe Yes - the Boot.ini file is in the root of C: and I can open and view it in Notepad just not in msconfig
View 6 Replies View RelatedI have an emachines bought in 2004... a few months ago we replaced the motherboard, videocard, upgraded to 1.5g ram, new fan, power supply etc. I'm an avid World of Warcraft: TBC user, and no its not the greatest graphics but worked fine for me... here recently it started blue screening and saying it was dumping physical memory. so i did system restor to a few months prior because i knew it was fine then, but after the restore it was missing .dll's for certain programs and wow was damaged horribly. i then attempted to restore back to today and all my restore points were gone... ran msconfig to load base apps and then attempted to use an older restore disk to start over... my main concern at that time was that i wanted to reformat c: but it told me i had to dismount the volume first.. and when i answered "y" to the "force dismount" question it told me it couldn't... it gets worse too.. now i can't even load windows because it tells me invalid partition table. i don't have the cd for xp (was preinstalled) and my original restore disks are useless (the silver has flaked completely off in spots even after careful storage for past few years.)...
View 7 Replies View RelatedI am speeding up a friend's computer. When I go to Start/Run/msconfig, nothing happens. It doesn't freeze up or give an error message, just lets me go on with my life with out the least sign that I have done anything.He purchased it from a rental place and I figure that they locked out some programs. I am a newbie, over my head.
View 12 Replies View Relatedas i turned on my laptop today i realized that there is no start menu. All my desktop icons are there, though they take longer than normal to load and taskmanager works fine and i have all my navigation menus as well. I am also unable to run msconfig, even in Command Prompt. When i type in msconfig, i get the following message.msconfig is not a recognized command. Another problem that i have been having is that if i click on a window, and taskmanager was infront of it, taskmanager does not move behind my active window. I am running windows XP, on a Presario V2000 with a 60 gig hd, and a 512. i have tried everything to get it to come back, i have booted in safe mode and tried that way, i have also used StartUp Mechanic to disable everything that i do not recognize in hopes that something is blocking the start menu from loading. I am okay with a computer, but the simpler the instructions the better.
View 14 Replies View RelatedI am trying to start my computer in safe mode through msconfig because pressing F8 at startup doesn't seem to work although I am missing the BOOT.INI tab.
View 11 Replies View RelatedMy boot tab disappeared. I ran Fixboot and fixMBR still nothing.
View 1 Replies View Relatedcan i turn safemode (Run>msconfig>Boot.ini>tick /SAFEBOOT) if i press f1 or f8 or somelike that when it starts up
View 5 Replies View RelatedI have a Vaio laptop. It takes forever to boot up. I've gone into msconfig and unchecked EVERYTHING in the boot up. It STILL takes an ung-dly amount of time to get to the desktop.
View 14 Replies View RelatedDid all kinds of virus and adware checks but no change. When I try to open msconfig I get a short hour glass and that is all.
View 6 Replies View RelatedAs far as I know boot.ini, ntldr and ntdetect.com are vital for XP to boot correctly. A few days ago I was working on a computer, during the boot process I noticed a message stating "invalid entry in boot.ini". I decided to check it out but there was no boot.ini !! ntldr and ntdetect.com are present. My Question is there a way that ntldr can bypass the boot.ini file?
View 8 Replies View RelatedI have noticed that when I run "msconfig" that my Boot.InI tab is missing. This is how I used to put my computer in Safe Mode (now I have to use F8 method) I was wondering was there anyway to get this tab back and what possibly could I have done to delete it?
View 2 Replies View RelatedWhen I tried to boot I got this error message(Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll. Please re-install a copy of the above file).After googling this problem I found several probable causes. Besides the actual file missing, I'm told it could be a bad boot.ini file, a bad hard drive, bad memory or even a bad power supply.
View 2 Replies View RelatedComputer has been very slow in logging in and shutting down. Also my computer has been freezing for atleast 20 seconds or more until I have to just shut it down. I also found last night that my Malawarebytes scanner found this "Rogue Installer" which I deleted. My computer is still running slow to shutdown so I'm not sure if this program is still in. Actually, for a few months I had been having some trouble(intrusions) with some type of virus. I wanted to try to clean the computer on Safe mode. I tried numerous of times by clicking fast or holding down the f8 key for safemode but nothing happens. My second option was mscongfig box but I found there was no "BOOT. INI" option. I'm not sure if there is a way to restore this option?
View 8 Replies View RelatedAfter getting my computer back from the repair service I noticed a message "boot.ini invalid." Still the computer boots. The BOOT.INI is not merely invalid - it ain't there. In the attached PDF you can see what I see. How do I get the file back short of reinstalling Windows XP?
View 4 Replies View RelatedI just reorganized my office. Everything was fine before but now I can't boot up to my OS (Windows xp). I get the following message and that's by itself on a black screen: Windows couldn't start because the following file is missing or corrupt. <windows root<system32hal.dll. Please reinstall.I'm using a Dell Dimension 2400. I've tried finding the file on the resource disk and in the XP installation disk. I've been online through another computer and found the dll but can't seems to install in on my Dell. I've tested everything through my resource disk and everything tests fine.
View 4 Replies View RelatedI have taken a hitachi hdd that had xp home on it, put it solo in a machine (cuz it is larger tryin' to upgrade) that had been using & working perfectly fine with 2k pro. got a missing os error. read dozens more. own full store bought version of the afore mentioned xp. tried to boot from cd, does NOT appear to even recognize anything is in the drive. went into bios made sure cd was 1st boot, still "missin os" still doesn't see cd in drive. here is where i would like some more detail pleez, mind you i'm a beginner, yet have a keen interest in computers. now i read that computers don't like swaps of os too hot, so i pulled the xp hdd back out of the 2k machine set it up as slave in the machine i'm using now (it's actual "birth" machine) & formatted it, then deleted it from the drivers before removing it. put it back in the rig that runs 2k, now the error states "NTLDR is missing". by the way i corrected the jumpers both swaps. tried the cd again still ntlrd error. went into bios, confirmed recognition of hdd, yep pretty as a picture. does'nt formatting wipe the thing clean (for my intent & purpose)? i have to be missing a step here, i mean why won't the thing read the cd? the cd rom works, i read something about possibly not being able to boot from it though!?
View 5 Replies View RelatedI had tried to run a friends HD as a slave drive with mine on my other machine earlier. I got it up and running & it repaired the friends drive and I was able to get some files off he wanted. After I turned it off & took his out I got an error message that some files are missing in windowssystem32configsystem on my computer that I was using with his HD. The message goes on to say to boot with the windows xp disk and try a system repair. Well, that failed also. I took it out and brought it up here and put it on with this one as the slave drive and I got into it. Is there a way I can repair those files with it running as a slave drive on this one, or do I have to just re-install windows again.
View 1 Replies View RelatedHere goes, the other day I booted up my PC and it showed "windows can not boot, ntfs.sys is missing or corrupt" so I did this. Microsoft support. I replaced the file in the recovery console and everything copied over fine. Then I booted up again and I received an error message before windows displayed my login screen --lsass.exe "endpoint is invalid" click ok and my computer reboots. Windows at that time was booting all the way up though. I found this support article but did not help Microsoft support This error does not allow me to boot into safe mode or regular windows but I can get into the recovery console.
View 5 Replies View RelatedDell Inspiron 9100, 1 GB mem, 60 GB HD, Win XP Home 2002 SP3. Kept clean with TE Pro, cseraser, syswiper, Adaware, Spybot S&D, AWC V2, Regcure, RegscrubXP. McAfee current. Win XP SP's and updates current.
Boot failed after POST with (as near as I can remember, sorry!) "missing or corrupt HAL.DLL"
This has happened twice. The first time it happened (a year or so ago), I reinstalled XP. I also installed
a second installation of Win XP in a WINDOWS2 dir. Set up boot.ini to allow me to select WINDOWS or WINDOWS2 to boot from. Figured this would help if it happened again.
i have dual boot on two HD, both XP Pro SP2 suddenly one of them (drive C can not boot. "Missing or corrupt HAL.DLL" i have google & see Microsoft Knowledge and try some advice but still no work.
View 3 Replies View RelatedMy moms computer had a big red X next to the C: Drive, so I ran AVG and it wouldnt work it just froze up. So I did some poking around online and found Vundo. So I ran it and it found a bunch of stuff and then deleted it all. Then when I restarted the PC I get the "NTLDR is missing, Press ctrl-alt-delete to restart" error message. So I found out how to fix that with a boot disk. Here comes problem number one. the recovery disk is HP Windows XP sp2. Im not sure if the OS is the same because the disk is from my laptop. (both are HP windows xp) So I put in the disk, hit ctrl-alt-del and press enter to boot from disk. Everything looks normal, it says windows setup, and is loading files at the bottom of the screen. At the welcome screen I press R and am taken to the recovery console. This is where it gets weird.
View 14 Replies View RelatedMy computer is a Dell Inspiron 6000 running Microsoft XP Home. My machine did not ship with a XP Home setup CD so I cannot follow the windows prompt. I have heard about dell system restore CDs, however I'm not sure if one came with my machine, and if so where it is. If this is what I need can an ISO be downloaded anywhere online? I do know that there is some type of partition on my HD, however I'm not sure exactly what it consists of or how to find out.In case anyone asks, I cannot boot windows in safe mode. If possible I would like to try to repair this problem without a complete reformat and reinstall as my data is only partially backed up. Additionally I have considered the possibility that this issue is the result of a HD crash, however I am not sure how I would go about testing this. Lastly if a reformat and re-install is necessary is there anyway to backup "My Documents" without starting windows?
View 7 Replies View RelatedRecently, when booting up, I have been getting 2 error messages (both appear twice). They refer to files not found or missing but I cannot begin to identify the files - all that I see are a series of little squares: 7 in a row, then a space, then 14 more. I click on OK and away they go and everything else seems to procede normally. I have a Dell Dimension, Windows XP Home. A call to Dell was not encouraging - they recommended re-installing the system. Oh dear. I have Norton Firewall and Anti-Virus, Microsoft's new Anti-Spy, WinPatrol, AdAware and Spybot. I am FAIRLY confident that my system is clean, but then, who knows? I have run registry checks and let them do their business (I don't fool around with the registry on my own, I am not a trouble-maker). If I need to re-install, I will work up the courage to do so, but until then...maybe someone here has had some experience with these error messages. At least I would learn something new. For now, my system SEEMS to be working OK, but what do I know. This could be a harbinger of worse things to come.
View 14 Replies View RelatedWhenever I try to boot up my computer, it says "NTDLR is missing." It just started doing this this morning, and it's been working fine. What might be the problem?
View 11 Replies View RelatedGot this laptop with a missing file error when I attempt to boot up the OS (Win XP btw)
it says lsasrv.dll is the missing file I pop in the xp OS CD that the customer brought in with them, and go to do a repair
So I pop in the WinXP CD we have here at work, still no luck...
Any suggestions on getting that file back? I fear, even if I try to reformat the laptop, it wont help my missing file problem
i see this message comes on my screen that there is a boot failure and that two files are missing.i must then insert system disk and press enter,then the system goes through setup,after finishing this process it takes a good time for windows to get going.but my problem is when i closed windows and restart my computer iam getting the same message that i must insert system disk and press enter,can you say what is happening. i am using windows xp professional service pack 2
View 1 Replies View RelatedIt started with the NTLDR is missing error,so I load the recovery console and prepare to copy it to the drive when I notice ALL the boot files are missing, in fact every file on the root of C drive is gone.So I make a boot disk from my lap top copy the boot files to the disk and give this a try. Boots fine and seems to run perfect. Copy the boot files to the C drive, reboot numerous times, all good so I go home, leaving him the boot disk and showing him what to do just in case.
Next day same thing, What we seem to have determined is that the files seem to disappear later in the evening. I had him run all the pgms he normally does for a good while, quit the pgm and check C. The files are still there. after a few hours of fooling around he leaves PC on and goes watch TV. Comes back about 11:00pm to turn off PC, checks C drive and they're gone again. He re copies the files, shuts down and goes to bed.Next day PC boots fines before work, after work etc... BUT some time later in the evening it happens again.
I am running xp pro I am getting an error when I boot the Computer.Missing my Boot.ini File I looked in the c drive and the boot.ini is missing. I don't know how or were it went I tried to copy it over from an other computer running xp pro, but I can't copy it.
How can I get it back.without reloading the os
As the title says my pci.sys in the system32drivers folder is missing or is corrupt, so I can't boot windows. The only possible solution is to start the recovery console and type:set AllowAllPaths = true expand d:i386pci.sy_ c:windowssystemdrivers32 If you don't type set AllowAllPaths = true you can't access the windows folder, thus I cannot fic the pci.sys. Well the problem is I don't have the Set command enabled, and It can only be enabled with MMC, but how the hell am I supposed to enable the Set command when I cant access MMC? Dilemma >.< don't wanna reinstall Windows XP again... So is there a way to get Set AllowAllPaths = true to work without MMC?
View 2 Replies View Related