When I open ADD/REMOVE PROGRAMS and then click on the ADD/REMOVE WINDOWS COMPONENTS I get two error messages and nothing shows.Messages: Setup was unable to load the master information file. The application could not be initialized. I am running Windows XP Pro with all the updates and patches installed.
View 12 Replies
I was trying to remove windows messenger by going to control panel -> add/remove programs -> add/remove windows components I misread the directions for this windows XP setup box and made it so that only windows messenger had a checkmark because I thought this meant that only windows messenger would be modified removed unfortunately, this just meant windows messenger stayed the same and all the other components i had installed were removed. I know they are still on my computer since for accessories/games I can go to start -> run and type in something like "winmine" and minesweeper will open up, however if I go to the start menu and look in games it is empty
View 3 Replies View Related[FONT=Arial][SIZE=4] Have another good one... I'm trying to learn NetMeeting just for the hell of it. Ran across an interesting problem (NOTE: system description below) Went to add windows components in Win XP Pro... Selected those to be added, XP started looking for install files, but could not locate specific application and dll files. WinExplorer displays the correct file in the correct folder, but install program cannot seem to locate same. Tried to install from HDD as well as O/S CD. I have installed XP on 100+ computers and never seen this Where in hell is NetMeeting Can't find it in XP, and don't get much of any answer from Help and Support
View 1 Replies View RelatedI tried to add the "peer-to-peer" networking option in the "Add/Remove Windows Components" option of the "add or remove programs" program in the control panel, but it won't let me; first of all, when I scroll down to the "Networking" option under the add/remove windows components, it is checked and yet greyed out.So I click on "details" where it lists the components available to install, and check "on" the peer-to-peer option, but when it goes to install it, it returns with an error of "an extended error has occurred". Gosh, so descriptive.
View 6 Replies View RelatedI went to "Control Panel", "Add or Remove Programs", "Add/Remove Windows Componets". Got a notice of "Windows XP Setup". Setup was unable to open information File 4. Contact your system Administrator. Specific Error Code is 0x2 at line 201184389. I am an Administrater and I am no help. I cannot add Windows Componets
View 1 Replies View RelatedIn Control Panel / Add or Remove Programs in the Add/Remove Windows Components section I have a problem. When I click on Add/Remove Windows Components, instead of the box coming up which lists all your Windows components, mine goes immediately to the install dialog as if I had already clicked through. It runs as if installing new components - finishes in a few sections and thats it. I searched online for a similar problem and fix but didnt find anything. I wondering if anyone had this or knows a way to fix it so the normal Windows Components Dialog Box pops up when It should
View 7 Replies View RelatedA while back I removed the calculator and paint programs from my computer and I've been trying to figure out how to restore them for some time now. I have found out that I need to go to Control Panel > Add/Remove Programs > Add/Remove Windows Components, but when I go to add them again, I get a prompt asking for my Windows XP disc. The problem is, when I purchased this computer, it didnt come with the install disc, Windows XP was already pre-installed. is there any way to Add the Windows components without the original install disc
View 4 Replies View RelatedWhen trying to remove Windows Messenger, I made a mess of the Add/Remove Windows Components section of Add/Remove Programs from the Control Panel. Instructions are very confusing, as Windows tells you in order to add/remove the various components, either check or uncheck the box. Not knowing if I should check or uncheck, I tried both, and in the process removed numerous if not all the components.
I managed to get Internet Explorer and Outlook Express back. I honestly do not remember how I did this as I was in a panic state. Meanwhile, I lost MSPaint. And, I'm worried about the other components, like Indexing Service, Networking Services, etc. in order to reinstall components that may or may not be missing, do I simply CHECK the boxes, Accessories and Utilities is NOT checked. I'm assuming that's the reason for why MSPAINT disappeared.
I am completely unable to generate ANY interest in this, and am baffled as to why, so maybe I can get some help here. how to actually get XP to recognize the checkboxes. As far as I can tell, this is display only(?). I'm trying to get it to work and suspect it may have something to do with the modes line in each INF
View 4 Replies View RelatedI get the following message:"Setup library msgrocm.dll could not be loaded, or function OcEntry could not be found. Contact your system administrator. The specific error is
0x7f" I have Windows XP SP3, and I'm trying to install the ISS from the install cd
Operating System: Windows XP Home Edition Service Pack 2 Computer Company: Hewlett-Packard In the process of removing a trojan some of the windows components were removed including outlook express, games, and windows messenger... All of these have been successfully restored. However, I am unable to restore MSN Explorer, when i try i get a popup that says Quote: The file 'auupdate.exe' on (unknown) is needed i do not know where to find this, it is set to find it as default in c:windowsServicePackFiles but when i select ok then it says file is not located here. where do i locate this file
View 10 Replies View RelatedI have winxp and when I access the add/remove windows components it says that another copy of this setup program is running. Please wait until it is through. I have no idea what this means. There isn't anything running
View 12 Replies View RelatedI uninstaled some windows components and it turns out that I need them and have not been able to reinstall them. I have been trying to reinstall the advanced features in my sounds and audio devices. Since I removed that feature when I play a DVD no my computer the sound will not get very loud. I am having no problem with other videos just DVD's. But I have also tried reinstalling games and other features and they will not install either.
When trying to install I use the Windows Installation CD and the installation seems to go fine. I don't get any error message, so I'm not sure what the problem is. I also tried the Add/Remove Programs feature in the control panel and got the same results.
When I try to add Fax Services as an XP Home SP 2 windows component in the add/remove control panel, I get a prompt for file fxsapi.dll. I can see the file in :WindowsService Pack Filesi386 but this setup routine says it can't find it even when I point it to it. After I hit retry many times I try the other solution it asks for- which is to insert the windows xp home service pack 2 CD-ROM. I do that and it says it can't find the file on the CD either. I've also tried removing MSN and it says it can't find certain files to remove MSN either. What is corrupted? Service Pack 2? I have 3 other XP computers and never had this problem before
View 1 Replies View RelatedIn the add/remove window the fonts identifying, components, config-uration and add a program are gone. These are located on the left side of the window, the rest of the window does have fonts.
View 3 Replies View RelatedWhenever I try to get to the add/remove windows components menu in add/remove programs, it gives me this error message:Setup was unable to open information file comnt5.inf.Contact your system administrator. The specific error code is 0x2 at line 2088999411.The application could not be initialized.
View 10 Replies View RelatedLast night I was trying to remove some unneeded Windows components that I thought were slowing my system down. I went into "Add/Delete Programs", and then "Add/Remove Windows components". I mis-interpretedd the prompts and ended up deleting everything except what I wanted to. When I tried to add the functions back it asks for my Windows CD. It's been a long time since I installed windows and I find that I can't locate the CD. Any idea how I might be able to restore my system. At the moment I no longer have a working internet connection
View 6 Replies View Relatedwhat file runs when you click on Add/Remove Windows Components in Add or Remove Programs in Control Panel Mines malfunctioning and Id like to try and replace it, but I can't find any info on where to look for it. When I click on it now, instead of getting a box with choices for Windows, it goes immediately to the action of installing, without going through the choosing part at all
View 3 Replies View RelatedRunning WinXProSP2. When I go to add/remove programs and click on the Windows components button, I get the error message: "Setup library MSDTCSTP.dll could not be loaded, or function 0cEntry could not be found. Contact your system administrator. The specific error code is 0x7e." I've searched a lot and the only references I can find are to Server 2003.
View 1 Replies View RelatedI have been trying to make some family clips and found ou that windows XP brings Movie Maker. I have Windows XP Home eddition. I tried to look in the Accesories/Entertaiment/ folder for the Movie Maker, but it's not there. I went to add/remove windows components, but there is no option to add movie maker. I thought I did not have the software so I went to the xp windows microsoft downloads and look for the movie maker. I tried to down load the package that brings this software but it run and applation to check if I required the download, but it was already installed. So it looks like that it's already installed, but I don't know how to acces it.
View 13 Replies View RelatedAll of the accessories and utilities were somehow deleted from me computer, but when I go into the add/remove windows components wizard, it won't let me install them. It says "Please insert the Compact Disc labeled 'Windows XP Home Edition Service Pack 2 CD' into your CD-ROM drive (D and then click OK". The only Windows XP CD I have only has Service Pack 1 on it and it doesn't work for this
View 2 Replies View RelatedHi,when I go to Control panel>add or remove programs>add/remove window components,I get an error message saying"setup was unable to open information file sidebar.inf"
View 1 Replies View RelatedI get an copy error, when trying to install windows components from control panel add/remove windows components. I have the right win xp sp2 cd in running and it says it cant find a specific file its looking for, but then when i click browse i see that its there in the cd the exact file i double click it and it doesn't recognize it or something again what can i do about this?
View 6 Replies View RelatedThe "Add/Remove Windows Components" feature in "Add/Remove Programs" does not work on my machine. Once I click it, I get error message: "Setup was unable to open informatioin file msslight.inf" "The application cannot be initialized". googled the problem, found varous advices online but nothing works.
View 27 Replies View RelatedI cannot get into this section because everytime i try, it says it cannot load the system information file "rsoptcom.inf". The specific error code is 0x2 at line 2086412116.
View 1 Replies View RelatedI never solved my other problem but now i found another. I can't seem to open my add/remove program box. I get an error message that says parser message."value creation failed".I have a pavilion notebook running xp, nothing added to it other than the way it was purchased a few months ago.
View 1 Replies View RelatedI want to remove a bunch of programmes that are listed on my start/programmes list and some have desktop icons however when i go to the add/remove programmes utillity none of them are listed.
I have tried removing some with a simple 'delete' from my computer/C/programmes but most cannot be removed and i am advised to use add/remove programmes.
How do i get A/R programmes to show what is loaded on the pooter?
Have an error that reads "You may be a victim of software counterfeiting" "This copy of Windows did not pass genuine Windows validation". We are running XP with service Pk3. It put an icon in the task bar and a banner on the desktop. anything I can do to remove this without formatting
View 1 Replies View RelatedI have been given a desktop with win XP Pro. it will boot to the log in screen and i do not know or have the password for the previous user. I have a legal copy of XP Pro and try to boot using the cd in the cd drive. it will run setup and load all the drivers and when it would normally start windows, i get the stop screen error. I have tried several boot disks with the same results. I tried Morphix (Linux) and a ERD with same results.
View 1 Replies View RelatedExplorer.exe keeps restarting.The shell stopped unexpectedly and Explorer.exe was restarted.Not really installed anything recently, so not really sure why its doing it.System: AMD Athlon XP 2500+ (oc'ed to 3200 - running at 2080Mhz, 189Mhz FSB) Asus A7N8X-D v2.0 mobo Geil pc3500 DDR 1gb RAM (2x512mb) 1x40gb Maxtor IDE HDD (for now)Windows XP Pro SP2.
View 14 Replies View RelatedI am trying to help a friend with an issue on their computer. We need to remove Norton, because the subscription has expired, and we want to install a different anti-virus software.Running Windows XP.When I go to Control Panel,then Add or Remove Programs the following error pops up:An exception occurred while trying to run C:Windowssystem32shell32.Dll,Control_Run Dll C:Windowssystem32Appwiz.cpl,Add or remove program.
View 8 Replies View Related
