I tried to add the "peer-to-peer" networking option in the "Add/Remove Windows Components" option of the "add or remove programs" program in the control panel, but it won't let me; first of all, when I scroll down to the "Networking" option under the add/remove windows components, it is checked and yet greyed out.So I click on "details" where it lists the components available to install, and check "on" the peer-to-peer option, but when it goes to install it, it returns with an error of "an extended error has occurred". Gosh, so descriptive.
I was trying to remove windows messenger by going to control panel -> add/remove programs -> add/remove windows components I misread the directions for this windows XP setup box and made it so that only windows messenger had a checkmark because I thought this meant that only windows messenger would be modified removed unfortunately, this just meant windows messenger stayed the same and all the other components i had installed were removed. I know they are still on my computer since for accessories/games I can go to start -> run and type in something like "winmine" and minesweeper will open up, however if I go to the start menu and look in games it is empty
[FONT=Arial][SIZE=4] Have another good one... I'm trying to learn NetMeeting just for the hell of it. Ran across an interesting problem (NOTE: system description below) Went to add windows components in Win XP Pro... Selected those to be added, XP started looking for install files, but could not locate specific application and dll files. WinExplorer displays the correct file in the correct folder, but install program cannot seem to locate same. Tried to install from HDD as well as O/S CD. I have installed XP on 100+ computers and never seen this Where in hell is NetMeeting Can't find it in XP, and don't get much of any answer from Help and Support
When I open ADD/REMOVE PROGRAMS and then click on the ADD/REMOVE WINDOWS COMPONENTS I get two error messages and nothing shows.Messages: Setup was unable to load the master information file. The application could not be initialized. I am running Windows XP Pro with all the updates and patches installed.
I went to "Control Panel", "Add or Remove Programs", "Add/Remove Windows Componets". Got a notice of "Windows XP Setup". Setup was unable to open information File 4. Contact your system Administrator. Specific Error Code is 0x2 at line 201184389. I am an Administrater and I am no help. I cannot add Windows Componets
In Control Panel / Add or Remove Programs in the Add/Remove Windows Components section I have a problem. When I click on Add/Remove Windows Components, instead of the box coming up which lists all your Windows components, mine goes immediately to the install dialog as if I had already clicked through. It runs as if installing new components - finishes in a few sections and thats it. I searched online for a similar problem and fix but didnt find anything. I wondering if anyone had this or knows a way to fix it so the normal Windows Components Dialog Box pops up when It should
A while back I removed the calculator and paint programs from my computer and I've been trying to figure out how to restore them for some time now. I have found out that I need to go to Control Panel > Add/Remove Programs > Add/Remove Windows Components, but when I go to add them again, I get a prompt asking for my Windows XP disc. The problem is, when I purchased this computer, it didnt come with the install disc, Windows XP was already pre-installed. is there any way to Add the Windows components without the original install disc
When trying to remove Windows Messenger, I made a mess of the Add/Remove Windows Components section of Add/Remove Programs from the Control Panel. Instructions are very confusing, as Windows tells you in order to add/remove the various components, either check or uncheck the box. Not knowing if I should check or uncheck, I tried both, and in the process removed numerous if not all the components.
I managed to get Internet Explorer and Outlook Express back. I honestly do not remember how I did this as I was in a panic state. Meanwhile, I lost MSPaint. And, I'm worried about the other components, like Indexing Service, Networking Services, etc. in order to reinstall components that may or may not be missing, do I simply CHECK the boxes, Accessories and Utilities is NOT checked. I'm assuming that's the reason for why MSPAINT disappeared.
I am completely unable to generate ANY interest in this, and am baffled as to why, so maybe I can get some help here. how to actually get XP to recognize the checkboxes. As far as I can tell, this is display only(?). I'm trying to get it to work and suspect it may have something to do with the modes line in each INF
I get the following message:"Setup library msgrocm.dll could not be loaded, or function OcEntry could not be found. Contact your system administrator. The specific error is 0x7f" I have Windows XP SP3, and I'm trying to install the ISS from the install cd
Operating System: Windows XP Home Edition Service Pack 2 Computer Company: Hewlett-Packard In the process of removing a trojan some of the windows components were removed including outlook express, games, and windows messenger... All of these have been successfully restored. However, I am unable to restore MSN Explorer, when i try i get a popup that says Quote: The file 'auupdate.exe' on (unknown) is needed i do not know where to find this, it is set to find it as default in c:windowsServicePackFiles but when i select ok then it says file is not located here. where do i locate this file
I have winxp and when I access the add/remove windows components it says that another copy of this setup program is running. Please wait until it is through. I have no idea what this means. There isn't anything running
I uninstaled some windows components and it turns out that I need them and have not been able to reinstall them. I have been trying to reinstall the advanced features in my sounds and audio devices. Since I removed that feature when I play a DVD no my computer the sound will not get very loud. I am having no problem with other videos just DVD's. But I have also tried reinstalling games and other features and they will not install either. When trying to install I use the Windows Installation CD and the installation seems to go fine. I don't get any error message, so I'm not sure what the problem is. I also tried the Add/Remove Programs feature in the control panel and got the same results.
When I try to add Fax Services as an XP Home SP 2 windows component in the add/remove control panel, I get a prompt for file fxsapi.dll. I can see the file in :WindowsService Pack Filesi386 but this setup routine says it can't find it even when I point it to it. After I hit retry many times I try the other solution it asks for- which is to insert the windows xp home service pack 2 CD-ROM. I do that and it says it can't find the file on the CD either. I've also tried removing MSN and it says it can't find certain files to remove MSN either. What is corrupted? Service Pack 2? I have 3 other XP computers and never had this problem before
In the add/remove window the fonts identifying, components, config-uration and add a program are gone. These are located on the left side of the window, the rest of the window does have fonts.
Whenever I try to get to the add/remove windows components menu in add/remove programs, it gives me this error message:Setup was unable to open information file comnt5.inf.Contact your system administrator. The specific error code is 0x2 at line 2088999411.The application could not be initialized.
Last night I was trying to remove some unneeded Windows components that I thought were slowing my system down. I went into "Add/Delete Programs", and then "Add/Remove Windows components". I mis-interpretedd the prompts and ended up deleting everything except what I wanted to. When I tried to add the functions back it asks for my Windows CD. It's been a long time since I installed windows and I find that I can't locate the CD. Any idea how I might be able to restore my system. At the moment I no longer have a working internet connection
what file runs when you click on Add/Remove Windows Components in Add or Remove Programs in Control Panel Mines malfunctioning and Id like to try and replace it, but I can't find any info on where to look for it. When I click on it now, instead of getting a box with choices for Windows, it goes immediately to the action of installing, without going through the choosing part at all
Running WinXProSP2. When I go to add/remove programs and click on the Windows components button, I get the error message: "Setup library MSDTCSTP.dll could not be loaded, or function 0cEntry could not be found. Contact your system administrator. The specific error code is 0x7e." I've searched a lot and the only references I can find are to Server 2003.
I have been trying to make some family clips and found ou that windows XP brings Movie Maker. I have Windows XP Home eddition. I tried to look in the Accesories/Entertaiment/ folder for the Movie Maker, but it's not there. I went to add/remove windows components, but there is no option to add movie maker. I thought I did not have the software so I went to the xp windows microsoft downloads and look for the movie maker. I tried to down load the package that brings this software but it run and applation to check if I required the download, but it was already installed. So it looks like that it's already installed, but I don't know how to acces it.
All of the accessories and utilities were somehow deleted from me computer, but when I go into the add/remove windows components wizard, it won't let me install them. It says "Please insert the Compact Disc labeled 'Windows XP Home Edition Service Pack 2 CD' into your CD-ROM drive (D and then click OK". The only Windows XP CD I have only has Service Pack 1 on it and it doesn't work for this
Hi,when I go to Control panel>add or remove programs>add/remove window components,I get an error message saying"setup was unable to open information file sidebar.inf"
The "Add/Remove Windows Components" feature in "Add/Remove Programs" does not work on my machine. Once I click it, I get error message: "Setup was unable to open informatioin file msslight.inf" "The application cannot be initialized". googled the problem, found varous advices online but nothing works.
I cannot get into this section because everytime i try, it says it cannot load the system information file "rsoptcom.inf". The specific error code is 0x2 at line 2086412116.
i have new laptop and it has Windows XP installed, I'd like to check the processor size, hard drive size, memory and other components to make sure I've got what I've paid for.
I've always used Windows 98SE in the past so could some kind person talk me through the procedure for XP.
It would also help if you could advise the main changes to watch out for using XP.
I'm trying to access IIS on my XP and there is no option for it on the Windows Components page, I assumed IIS came with XP, is there another way to access it or can I send off for software?
I ourchased this E-machines from a pawn shop about 2 months ago. Its about 6 years old. It's using Windows XP Home. I've had steady problems since day 1. First, I cannot restore. It has no disc and Gateway will not let me buy a recovery disc, because the system is not in warranty. Second, I just bought a printer. I can't install the printer, because the Wizard keeps telling me the Print Spool isn't working. I can't turn it on. I go into MSconfig and it is checked, but it won't run.I also keep getting a window telling me some program is missing a dll. paretlogic/dll? I have no idea what the previous owner did to the thing and I can't even restore it to fix it. I've run a reg cleaner and that doesn't help either. What next? I just wanna use my printer.
WebWorks.exe -Unable to Locate Components Everytime I start my computer this error box comes up Inside the message is 'wwwcore.dll reinstall I don't have clue what needs to be reinstalled.. ?? how do I find out or make the error message go away
I am having trouble setting up XP on my Windows 2000 SP4 Computer.I know I installed the components into the computer, but it does'nt show up.I have no experience In boot disks or anything else, so please speak slowly.
Not sure if this is the right forum, does anyone know where there is a list of CLSIDs for windows components and what they correspond too? I have been looking but can't find anything but extensions and spyware.
I have four legal copies of Windows XP, two Home and two Professional.Whenever I need to reinstall onto a new computer or a repaired system, it is now a two-step process that takes almost three hours:Perform the reinstall,Apply the patch to SP2.Microsoft Support wants $30 + tax/shipping to send me replacement CDs that have SP2 on them, and before I bite that bullet, I am wondering if there is a more creative solution. Is there any way to create an SP2 CD from the combined components of an original CD and the components of the downloaded patch? Any other solutions or paths to take to resolve this? I imagine this has been a source of discussion for some time, although a Google search did not turn up anything, perhaps owing to my uncertainty over which keywords to use.
