After reinstalling windows on my laptop, I have a minature screen about 5"x6" instead of the full 15" monitor, and I cannot get my 2wire wireless card to work at all. It was fine before my re-install
View 14 RepliesIf I install 2 VGA cards into my XP Pro system, would I be able to have the same image (cloned) on each adapter?
View 4 Replies View RelatedI was having problems due to SP3 but I didn't know it. I haven't seen any posts on it here but there's a big hubub over at the microsoft technet forum.) Ran a dell diagnostic and had many system memory failures come up. So, I decided to reseat my memory cards for a start. It was the first time I opened up my Dell Dimension 8400 (which I purchased about 4 years ago...I hope that gives some help as to what is in it because I really don't know besides that it has an intel pentium 4 inside). It was VERY dusty so we bought some canned air and went about cleaning it. I did use a vacuum on the inside cover but I was careful not to touch any of the componenets inside. I followed all of the instructions. We did blow air into the fan (something I didn't know wasn't good, per another site I went to later that said you shouldn't)! When we plugged everything back in it worked it's way up to a very loud whirring noise (I thought the fan was going to just break off and fly around the room!). Could be I just had never heard it run outside of the cupboard on my desk (which I now know I shouldn't have had it in)! But, the worst part is, my monitor does not come up with the computer (doesn't matter how many times I press the on/off on the monitor) and not even the lights on the keyboard light up
View 14 Replies View RelatedThis problem is kind of wierd I was having problems with my video card. When I went to boot up the screen would go black. New drivers would not fix the issue. So I bought the same videocard again, thinking that something was wrong with the old one. The new videocard still doesn't work, but in the process of trying to boot up it did something to the registry, so now if I try to boot up I see a blue screen which says there is a registry problem and it shuts the computer down. Getting frustrated I thought it was best to just reinstall XP - so I started the process, only when it got to which partition you tell it to use I got the same blue screen with a registry error. So now what? How can I reinstall XP I thought that when you were installing XP it was basically "running" off of the install disc, so how could the registry be effecting it?
View 4 Replies View RelatedI've formated and installed windows XP sp3, there are 2 lan cards on my motherboard, one for internet cable, the other is attached to a hub for networking. After installing windows XP, only one card is working when I disable the other, I need to make both cards work simultaneously.
View 1 Replies View RelatedOk Dum question - How does one hook up a single monitor to dual pci express video cards with a Y or is dual pci express for dual monitors?
View 7 Replies View RelatedMy problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
View 1 Replies View RelatedI took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
View 16 Replies View RelatedI've been told my video card (NVIDIA GeForce FX 5500) is shot. What is compatible with my ASUS K8V SE Deluxe?
View 1 Replies View RelatedI have had two video cards in this machine (Windows XP Home SP2) in the past for a dual screen setup.Today I put in a 2nd video card again (as the one that was in there previously has gone walk-about) but I dont have the option in windows for the 2nd screen.Everything appears fine in device manager (the screen that is working is the PCI ViRAGE one), as for the GeForce - well the light on the monitor comes on but doesnt display a picture, but in display properties there is no option for the 2nd card. (see attached screenshot)
View 1 Replies View RelatedI am trying to get a computer to output the same thing to at least two seperate monitors. All I can seem to manage to do is get an extended desktop, which means I can drag things off of my screen onto the other monitor instead of displaying the same thing on both monitors which is what I am trying to do. When I uncheck the "Extend my windows desktop to this computer" on another display it disables the monitor, and when I enable the display it automatically checks it.
In this Compaq (I know Compaq sucks) computer I have 2 video cards. One onboard, and one PCI. The PCI video card has 2 outputs, the onboard has one. I have reached a point where in Windows XP I can output to 3 seperate monitors utilizing the extended desktop feature, which means I am outputting from the PCI video card and the onboard video card. In order to do this I used a microsoft work around in which you must disable hardware acceleration on each driver.
I try to keep personal financial info off my computer, but I'm not sure of success. Is the a web page or similar source that will tell me how to systematically remove every instance of credit card and/or password or anything else important from my computer.
View 6 Replies View RelatedI'd appreciate some help with this and have seen similar threads, but am just not competent to sort this out on my own.Windows Explorer is no longer reading my camera card. It either fails to respond or just loads the thumbnail icon and then seems to stop, although a couple of times I left it for around 30minutes and most of the 70 thumbnails had opened, so I'm not completely sure if it's stopped or if it's just so slow the computer thinks it's not working.It will open them once they are in a folder on the PC and I can transfer them using the Nikon software otherwise I'd have a useless camera!I'm also getting quite a few "Internet Explorer is not responding messages", and after downloading version 8 went back to version 7 but it's still happening.
Recently I opened up my computer to take the dust out of it as I have before. I hadent done so in a long time so there was some caked on dust on some components. I took the RAM out an cleaned it, re-installed it. I also took my vidoe card out because the heat sink had been cloged with dust aswell. After putting everything back and restarting my computer I recived this msg before windows start up. Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEMand it followed with instruction to use the xp setup disk to repair the problem. so I threw the windows CD in, and tried to repair however the program tells me I have no hard drive installed. Which I do since my computer is 3 years old now and has been working fine. I hadent changed any bios settings, I never disconnected the hard dirve either.
The wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
View 10 Replies View RelatedWe have two laptops and one wireless (HP Photosmart C7280) printer. Our laptops both connect to the internet wirelessly through a router. I was able to install and can print wirelessly from my laptop (a Mac) with no problems. However, we cannot figure out how to print wirelessly from my boyfriend's laptop (a Dell). We have installed the printer software and the printer itself on his laptop, and the laptop is able to identify the wireless printer over the network. We made sure that the printer is set to "online" and that file/printer sharing is turned on. But, whenever we go to print any kind of a file, we get an error message simply stating that the printer was unable to print and that we should run the troubleshooter. So, we run the troubleshooter, and we get this message:"The troubleshooter was not able to ping (detect a connection with) your print server. This might be the cause of the problem. Verify that your network is configured correctly and that you are connected to the network."
I am more used to working with Macs and my boyfriend is computer illiterate, so we're a bit lost as to what this means. I was able to set up a wireless network connection on his laptop, but beyond that I'm not sure what else to do. Most of the other advice I've seen online involves a wireless printer that is wired to one computer, and another laptop trying to wirelessly access that printer through the connected computer...if that makes any sense. Our printer isn't wired to anything, and we just can't figure out why it'll print wirelessly on the Mac but not on the Dell laptop. Any ideas?
I have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.
View 1 Replies View RelatedDoes anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
View 14 Replies View RelatedIf i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
When I boot my computer Windows freezes at the "Windows is starting..." screen but I can still move the mouse. This just began today. It does this same thing when I boot in the last good config and safe mode. So basically, Windows won't get past this screen no matter what mode I use.Also, I can't reinstall XP because I get a technical error blue screen that says I may not have adequate disk space, a driver may need to be disabled, or I may need to change the video adapter whenever I try to boot from the install CD. The message also says "pci.sys."
I've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies View RelatedHow to connect from Wireless router to Wireless router.
View 1 Replies View RelatedI need to install Windows XP Pro on my laptop. Currently it has Vista. Some people are selling these installation CDs (and keys) on ebay. Can I buy it from there?
View 6 Replies View RelatedWhenever I try to install something, the window that shows thats its installing closes and installation stops. I restart the install, but it keeps on closing and at different times.
View 6 Replies View RelatedI am trying to install SP3 on a Windows XP Home (currently SP2). The installation is hung on "Finishing Installation - Performing cleanup". I downloaded the installer from the MS Download center (it didn't appear in Windows Update). Is it safe to turn off the computer (since I can't close the installer), or should I let it sit for a while longer (it's been hanging for a few hours)?
View 2 Replies View RelatedI just finally got my wireless connection working, after a couple days. Is there any particular tweak or setting for windows firewall Anything I need to do there to make sure I am protected
View 5 Replies View RelatedThinkpad T30 running XP pro. In order to use my wireless network I must run the services.msc program to start the wireless. I can connect to my neighbors unsecured wireless automatically but not my own secured network. Microsoft Bulletin # 871122 explains how to run the program but it is required to run every time I reboot. How do I permanently make the change?
View 7 Replies View RelatedI am living in a shared residence and the guys here are running wireless adsl. It is an infrastructure network using 128bit WEP encryption. I'm not sure about their hardware but I am using an asus 54mbps usb stick. I have no problmes logging on but for some reason the wireless config. program automatically checks the "the key is provided for me automatically" option in the network properties. Now this prevents me from getting access to the network after any sort of disconnection. If I uncheck this box the stars in the key field (representing the WEP key) dissappear and so the key needs to be reentered. It only does this some times and since I don't have a copy of the key (the network administrator enters it on my computer) every couple of days I need to get the key re-entered on my computer. It is a real hassle and I can't work out why windows keeps defaulting to this option of having the key provided automatically.
View 1 Replies View RelatedOur wireless infrastructure is always changing and evolving so I was thinking on creating some kind of GPO that can be pushed to laptops and configure wireless settings that way. Is there a registry key that can be exported (from already configured laptop) that will contain all wireless settings? We have 2 different profiles we use through Windows Zero on XP SP2. This registry should have everything in there (ssid, keys, encryption, RADIUS and other possible settings for wireless)Please help. It is a great pain to type in keys and mess around with wireless settings most of my day.
View 1 Replies View RelatedI can't seem to be able to connect to my wireless Internet on one of the computers I have. (It's NOT a laptop) I plugged the router into the computer and it can't find my network, or any, really. It works on a different computer. I'm guessing the wireless config is turned off or something. I have played around with the computer and can't seem to turn it on. Where would it be located? I'll post updates as I get them.
View 2 Replies View Related