Zero Wireless Configuration
Mar 19, 2005
I am living in a shared residence and the guys here are running wireless adsl. It is an infrastructure network using 128bit WEP encryption. I'm not sure about their hardware but I am using an asus 54mbps usb stick. I have no problmes logging on but for some reason the wireless config. program automatically checks the "the key is provided for me automatically" option in the network properties. Now this prevents me from getting access to the network after any sort of disconnection. If I uncheck this box the stars in the key field (representing the WEP key) dissappear and so the key needs to be reentered. It only does this some times and since I don't have a copy of the key (the network administrator enters it on my computer) every couple of days I need to get the key re-entered on my computer. It is a real hassle and I can't work out why windows keeps defaulting to this option of having the key provided automatically.
View 1 Replies
ADVERTISEMENT
Apr 3, 2008
Thinkpad T30 running XP pro. In order to use my wireless network I must run the services.msc program to start the wireless. I can connect to my neighbors unsecured wireless automatically but not my own secured network. Microsoft Bulletin # 871122 explains how to run the program but it is required to run every time I reboot. How do I permanently make the change?
View 7 Replies
View Related
Feb 6, 2008
My Compaq running on Windows XP Home has suddenly and mysteriously started running at high CPU's (almost 100%) at boot. From Task Manager, I could see that it was the svchost.exe that was running high. I contacted Microsoft and after 2 1/2 hours of shutting down literally every process and then slowly re-adding them, it was found that it is the wireless zero config that is running all of the CPU's. I am on a laptop (wireless through DSL - sbcglobal - and using a linksys router which is running at 11 - maximum connection)downstairs. I have NEVER had a problem until 2 days ago. I have added NOTHING to the computer.
I can sit directly next to the router (upstairs) and the CPU will drop, but not completely. When I plug into Linksys using ethernet, the CPU stops to 1% - and the computer resets itself. It will be fine the rest of the day. I have also had success unplugging Linksys for about 5 minutes (while sitting next to it) and that also seems to reset the CPU usage. HOWEVER - if I restart, either from warm or cold boot, the same cycle happens all over.Linksys gave me a patch, which has done nothing. They said if it was a Linksys problem, the patch would have fixed it.Microsoft can't help - it is a wireless issue.SBC can't help - it is a Linksys issueI haven't yet called Compaq because I am afraid they will tell me that the high CPU is due to a failing in my internal wireless. THE Presario 3240US IS 4 YEARS OLD AND HAS BEEN GREAT - NEVER ANY MAJOR PROBLEMS! Obviously, the computer is having to work too hard to connect to the wireless system, thus the high CPU's. And, when it runs high, I have problems with the internet slowing down. Anyone out there ever had this problem? Is it time for a new computer?
View 9 Replies
View Related
Nov 18, 2007
I recently fixed some registry problems and now my computer starts very slowly. The background comes up and it takes forever for the icons to appear. When the do I get a wireless configuration notification dll not registered error.
View 3 Replies
View Related
Mar 18, 2007
Every time I shut down my Dell Inspiron laptop, Windows' Wireless Zero Configuration service shuts down. So, everytime I start the computer, I have to restart the service, go into Wireless Network Connection Properties and reclick "Use Windows to configure my wireless network settings" to be able to access the internet. Is there a way to make sure WZC stays on permanently? When I hit START on the activity, I'm not given the option to hit APPLY.
View 2 Replies
View Related
Feb 25, 2006
I have been using a Belkin Wireless Router on my XP Pro system for some time but now it will not connect to the web. I think the problem has been caused by a virus but my system appears clean now. As it stands I cannot access the Router Configuration because the message "Network Not Available" appears. I have been in contact with my ISP, Belkin and have replaced the router with a new one all without success. I have looked into the WZCSVC and other services and when checking the dependencis the nessage "WMI:Critical Error" appears. All settings on the system are correct for setting up the router but it will not access the web. it seems the computer will not allow the router to "talk" to the web. Whatever caused the problem also appears to have deleted the system restore poits.
View 13 Replies
View Related
Oct 17, 2007
I have an HP PAVILION ZV5000, running win xp home spk 2, it is weird, i have setup the windows zero configuration setup as automatic so the service should start when the computer is already on the desktop, so what happen is that it does not start, so i have to go and click on start a service so then it start, and then this allow me to go to the wireless card properties and allow me to see the wireless tab and i can get connected, so each time i shutdown the computer the service does not start again automaticly so i have to repeat all the previous steps, i checked the laptop for virus nad i found a couples and it was fixed is there any help on this issue what can be wrong ? the card connect to his full speed and while connected is great?
View 2 Replies
View Related
Oct 28, 2007
My problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
View 1 Replies
View Related
Mar 29, 2009
I took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
View 16 Replies
View Related
Jun 14, 2010
The wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
View 10 Replies
View Related
Mar 1, 2009
We have two laptops and one wireless (HP Photosmart C7280) printer. Our laptops both connect to the internet wirelessly through a router. I was able to install and can print wirelessly from my laptop (a Mac) with no problems. However, we cannot figure out how to print wirelessly from my boyfriend's laptop (a Dell). We have installed the printer software and the printer itself on his laptop, and the laptop is able to identify the wireless printer over the network. We made sure that the printer is set to "online" and that file/printer sharing is turned on. But, whenever we go to print any kind of a file, we get an error message simply stating that the printer was unable to print and that we should run the troubleshooter. So, we run the troubleshooter, and we get this message:"The troubleshooter was not able to ping (detect a connection with) your print server. This might be the cause of the problem. Verify that your network is configured correctly and that you are connected to the network."
I am more used to working with Macs and my boyfriend is computer illiterate, so we're a bit lost as to what this means. I was able to set up a wireless network connection on his laptop, but beyond that I'm not sure what else to do. Most of the other advice I've seen online involves a wireless printer that is wired to one computer, and another laptop trying to wirelessly access that printer through the connected computer...if that makes any sense. Our printer isn't wired to anything, and we just can't figure out why it'll print wirelessly on the Mac but not on the Dell laptop. Any ideas?
View 3 Replies
View Related
Sep 18, 2007
I have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.
View 1 Replies
View Related
Jan 25, 2005
Does anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
View 14 Replies
View Related
Mar 12, 2010
If i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
View 4 Replies
View Related
Aug 26, 2010
How to connect from Wireless router to Wireless router.
View 1 Replies
View Related
Jun 24, 2006
My computer started acting up the other day. It would teboot on its own. Then today, something sparked and smoked. I turned it off hard. Then after a while I turned it back on, but it said restarting set up and asked for the installation CD. I put it in and Windows installed, but my documents was all gone to about four months worth.
View 2 Replies
View Related
Jun 24, 2005
I am using VNC behind a router - can anyone advise me as to how I configure VNC for remote working?
View 8 Replies
View Related
Mar 22, 2008
I have stopped some services running to speed up my computer but I have noticed recently it keeps reverting back to normal start up and I have to go through unchecking the services that are not needed again. It may be since I installed 'iplayer' from BBC website which uses the Kontiki p2p network. This uses a utility called k services and k host which runs in the startup. I disabled them as they connect to the network even when the program is shut down. How do I stop ms config reverting back to normal please?
View 3 Replies
View Related
Jan 11, 2006
sorry for double post but i'm looking for the equivalent of 'config.exe' in windows xp so that I can modify the programmes that start when windows boots up.
View 3 Replies
View Related
Feb 19, 2008
On Drive C Used Space 11.2GB Free Space 137GB (NTFS)I am expecting this drive to fill up over the next 18 months. Drive D Not used at present condition raw 40GB (I got that from the properties tab - after I had tried to get Windows to format it). How do I change it from raw state to something that can be used? I also have Seagate Free Agent 250GB external backup - Not Used at present. I have some software called Spotmau Power Suite 2008 but I am not really sure how to put this whole thing together.At the moment when I start the computer (Drive C) it runs CHKDisk on drive D every
time.
1)What Im really trying to do is format Drive D. I tried to do that with Windows but it didn't work. I dint know how to do this so any advice would be helpful.
2)I would like to use the rest of the capacity for backup that is Drive D and the Seagate external drive, but Im not sure how to go about it. Can someone help please?
3)Am I right in thinking it would be better to use just the one operating system Windows XP on drive C and not put it on drive D as well?
View 14 Replies
View Related
Apr 27, 2006
I have what is hopefully an easy question: I have a windows "configuration" box that pops up quickly after I log in (XP Professional), then it closes down right away.It's like one of those "configuring personal settings" boxes that shows up after you install something, then reboot to complete the install. When you log in, the box pops up saying that it's configuring the thing you just installed.But this one goes by so quickly, I can't see what software it's trying to confiure. I uninstalled the couple of utilities that I had recently installed -- thinking they might be the culprits -- but it's still appearing. And since it's started appearing, my machine hangs for a couple minutes after login, like it's waiting for something to timeout. Before this started, life was good. Whatever it's trying to do, it's not being able to do, because it keeps running every time I log in. And my virus scan is completely clean.Anyway, my question is: does anyone know where Windows stores the information about installations or configurations that need to run on reboot? I've looked in the registry in the Run and RunOnce sections of both HKLM and HKCU, and there's nothing there. It's also not in the Startup folder.Obviously, there's some command somewhere that's running whenever I log in. I just need to find out where it is so I can figure out what's causing it.
View 2 Replies
View Related
Sep 19, 2006
i have a problem with random unsigned blue screens in windows xp, i can boot into safe mode and have no problems, i can boot into windows for a maximum of 30 mins. without getting a blue screen. every now and then a send error report will tell me to install the latest drivers for my graphics card however i have the latest drivers for it.
View 1 Replies
View Related
Sep 21, 2006
Freshly configured windows XP pro. installed SP2 that I had on a disk. installed avg free, when IE is started, an svchost program starts, and eats up 99% of the resources. I try to get the windows updates which I believe would solve this problem, but I can not. I end the svchost process and IE will browse to websites, but still cannot get the windows updates. how can I get the updates which I believe would fix, I have done this very same configuration with the same results on 3 computers, they were all fresh installs.
View 4 Replies
View Related
Jul 26, 2005
How can I direct the backup utility to use the CD-Rewritable Drive rather than the Floppy Drive?
View 2 Replies
View Related
Jan 16, 2008
We've got upwards of 400 workstations running Windows XP SP2. They also have the Novell Client 4.91 SP4 and network printers are managed through NDPS. Several months ago 20 new printers (IBM Infoprint 1532) were deployed across our LAN. Today I was told that the following changes need to be made by February: 1) In the printer driver properties, Enable the Duplexer 2) Under printing preferences, set Duplexing as the default. I was told that we techs need to physically touch each workstation to implement these changes.
View 2 Replies
View Related
Sep 22, 2005
How can I duplicate an installation of Windows 2003/Exchange 2003, to another machine having a different hardware configuration.
View 1 Replies
View Related
Mar 5, 2010
First, I had to make a small change to the SATA Mode from ACHI to IDE because if I didn't change it, it would crash with 0x0000007B BSOD. But after installing the Text part of Windows XP, i was moving to the GUI part and it said: Windows could not start because of a hardware configuration error. I am confused of what to do with it. I tried, fixboot, chkdsk /r, i even tried installing it again, but to no avail. Oh and one more thing. I had Windows 7 Ultimate at first in one partition. I installed Windows XP on the other partition, but it didn't work. In the end i couldn't even access my Windows 7 now. I need it for my school project.
View 2 Replies
View Related
Jan 25, 2009
I've used Microsoft Configuration a hundred times, no problems with that. I alway zero in on Startup check or unch0eck something and leave it at that.Tonight I noticed a tab marked "service" and investigated. There are lots of entries, all checked off, and many of them refer to programs long since deleted. What are these entries, can I uncheck some of tjhem, eg the ones belonging to programs long ago deleted? And most important why is this section separated from startup?
View 5 Replies
View Related
Dec 25, 2004
is there any way to get msconfig on 2000 pro
View 1 Replies
View Related
Feb 25, 2005
I am currently using windows xp on my computer. I tried to speed up the computer by making some changes in msconfig. I went to selective startup and unchecked some boxes in startup. The changes didn't make a difference after I restarted the computer. I clicked on diagnostic startup by accident, so I then clicked normal startup and restarted my computer. Now help & support will not work. It keeps saying that windows can not start help and support due to system files not running. I also can not log onto the internet. It says aol must download files first before you can access. I hit yes and nothing happens. I tried to run error checking and it won't let me because it says there are some things not running. I also went into system information and checked the hard drive and it says that it failed. How I can fix this would be greatly appreciated.
View 3 Replies
View Related
Mar 14, 2005
I am running Windows XP Pro. I was wondering If there Is a program like Microsoft Configuration that you can turn off programs for one use and keep It for another user? For example I have ghost I want It to run on my user but turn It off for other users. What I want to do Is setup a USER account for video editing and have no programs running.
View 3 Replies
View Related
