MS Configuration Settings
Mar 22, 2008
I have stopped some services running to speed up my computer but I have noticed recently it keeps reverting back to normal start up and I have to go through unchecking the services that are not needed again. It may be since I installed 'iplayer' from BBC website which uses the Kontiki p2p network. This uses a utility called k services and k host which runs in the startup. I disabled them as they connect to the network even when the program is shut down. How do I stop ms config reverting back to normal please?
View 3 Replies
ADVERTISEMENT
Apr 15, 2008
I'm trying to get my Nvidia Display settings to save under the Change Display Configuration panel and every time I reboot they seem to revert back to regular settings under another resolution.I am using a laptop with a LCD monitor and I'm trying to get the "Only use one display (Single)" setting to stick, and it works when I hit apply but after the reboot it gets removed back to (Clone).
View 1 Replies
View Related
Apr 1, 2006
I found images in Windows Picture and Fax viewer that I want to delete. I can delete them one-by-one, but that takes time. I went to Disk Cleanup up and deleted all Temp and Temp internet files, but the images are still there. I checked Properties of the images for the file names, went to Win Explorer, but only found C:Documents and Settingsuser, there was no subfolder for Local Settings and, obviously nothing after that. I did a Search in Explorer, including hidden files and folders, for the file names and the searches resulted in nothing. I am back to deleting one-by-one, but my concern is, Where did everything from Local Settings on go to. BTW, I also run Skybot, Adaware and Norton virus weekly
View 14 Replies
View Related
Apr 29, 2010
When I started up it says Win.ini corrupt. Then it starts up as a new user losing track of Favorites and Start Menu and Desktop Icons, Display and Folder attributes. Under
Documents and Settings it has added Dave.U5R2D5 in addition to Dave which still has all the information. I tried switching the 2 Filenames to get back to what it used to be but gave an error message and didn't do it and started another new file.Is there some way to use the old Dave file?
View 1 Replies
View Related
Sep 11, 2004
I'm having a major problem with XP Home Edition. When I start my computer, I get the Loading Settings screen, which automatically switches to the Saving Settings screen and then goes back to Loading Settings, Saving Settings, etc, etc, (the "Windows XP Startup" and "Windows XP Shutdown" sounds repeat themselves one right after the other). By the way, I have the XP tweak that skips the Welcome and log on screens at startup since I'm the only person that uses the computer. I've tried Debugging, Safe Mode with Command Prompt, Restore To Last Working Settings and a few others, but nothing is working. I ran Spybot just before shutting down the computer the last time it worked and got the "Congratulations! Your system contains no spyware" message. When I restarted the computer, I started having this problem. I also have Norton Anti Virus 2004 and did a Live Update (manually) a few hours before this started happening.
View 14 Replies
View Related
Jul 28, 2005
What is the "Temp" folder for which is at C:Documents and Settings Admin Local Settings Temp? Nothing seems to appear there while I use IE to browse.
View 3 Replies
View Related
Sep 29, 2009
Files and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
View 2 Replies
View Related
Jun 24, 2006
My computer started acting up the other day. It would teboot on its own. Then today, something sparked and smoked. I turned it off hard. Then after a while I turned it back on, but it said restarting set up and asked for the installation CD. I put it in and Windows installed, but my documents was all gone to about four months worth.
View 2 Replies
View Related
Jun 24, 2005
I am using VNC behind a router - can anyone advise me as to how I configure VNC for remote working?
View 8 Replies
View Related
Apr 3, 2008
Thinkpad T30 running XP pro. In order to use my wireless network I must run the services.msc program to start the wireless. I can connect to my neighbors unsecured wireless automatically but not my own secured network. Microsoft Bulletin # 871122 explains how to run the program but it is required to run every time I reboot. How do I permanently make the change?
View 7 Replies
View Related
Mar 19, 2005
I am living in a shared residence and the guys here are running wireless adsl. It is an infrastructure network using 128bit WEP encryption. I'm not sure about their hardware but I am using an asus 54mbps usb stick. I have no problmes logging on but for some reason the wireless config. program automatically checks the "the key is provided for me automatically" option in the network properties. Now this prevents me from getting access to the network after any sort of disconnection. If I uncheck this box the stars in the key field (representing the WEP key) dissappear and so the key needs to be reentered. It only does this some times and since I don't have a copy of the key (the network administrator enters it on my computer) every couple of days I need to get the key re-entered on my computer. It is a real hassle and I can't work out why windows keeps defaulting to this option of having the key provided automatically.
View 1 Replies
View Related
Jan 11, 2006
sorry for double post but i'm looking for the equivalent of 'config.exe' in windows xp so that I can modify the programmes that start when windows boots up.
View 3 Replies
View Related
Feb 19, 2008
On Drive C Used Space 11.2GB Free Space 137GB (NTFS)I am expecting this drive to fill up over the next 18 months. Drive D Not used at present condition raw 40GB (I got that from the properties tab - after I had tried to get Windows to format it). How do I change it from raw state to something that can be used? I also have Seagate Free Agent 250GB external backup - Not Used at present. I have some software called Spotmau Power Suite 2008 but I am not really sure how to put this whole thing together.At the moment when I start the computer (Drive C) it runs CHKDisk on drive D every
time.
1)What Im really trying to do is format Drive D. I tried to do that with Windows but it didn't work. I dint know how to do this so any advice would be helpful.
2)I would like to use the rest of the capacity for backup that is Drive D and the Seagate external drive, but Im not sure how to go about it. Can someone help please?
3)Am I right in thinking it would be better to use just the one operating system Windows XP on drive C and not put it on drive D as well?
View 14 Replies
View Related
Apr 27, 2006
I have what is hopefully an easy question: I have a windows "configuration" box that pops up quickly after I log in (XP Professional), then it closes down right away.It's like one of those "configuring personal settings" boxes that shows up after you install something, then reboot to complete the install. When you log in, the box pops up saying that it's configuring the thing you just installed.But this one goes by so quickly, I can't see what software it's trying to confiure. I uninstalled the couple of utilities that I had recently installed -- thinking they might be the culprits -- but it's still appearing. And since it's started appearing, my machine hangs for a couple minutes after login, like it's waiting for something to timeout. Before this started, life was good. Whatever it's trying to do, it's not being able to do, because it keeps running every time I log in. And my virus scan is completely clean.Anyway, my question is: does anyone know where Windows stores the information about installations or configurations that need to run on reboot? I've looked in the registry in the Run and RunOnce sections of both HKLM and HKCU, and there's nothing there. It's also not in the Startup folder.Obviously, there's some command somewhere that's running whenever I log in. I just need to find out where it is so I can figure out what's causing it.
View 2 Replies
View Related
Sep 19, 2006
i have a problem with random unsigned blue screens in windows xp, i can boot into safe mode and have no problems, i can boot into windows for a maximum of 30 mins. without getting a blue screen. every now and then a send error report will tell me to install the latest drivers for my graphics card however i have the latest drivers for it.
View 1 Replies
View Related
Sep 21, 2006
Freshly configured windows XP pro. installed SP2 that I had on a disk. installed avg free, when IE is started, an svchost program starts, and eats up 99% of the resources. I try to get the windows updates which I believe would solve this problem, but I can not. I end the svchost process and IE will browse to websites, but still cannot get the windows updates. how can I get the updates which I believe would fix, I have done this very same configuration with the same results on 3 computers, they were all fresh installs.
View 4 Replies
View Related
Feb 6, 2008
My Compaq running on Windows XP Home has suddenly and mysteriously started running at high CPU's (almost 100%) at boot. From Task Manager, I could see that it was the svchost.exe that was running high. I contacted Microsoft and after 2 1/2 hours of shutting down literally every process and then slowly re-adding them, it was found that it is the wireless zero config that is running all of the CPU's. I am on a laptop (wireless through DSL - sbcglobal - and using a linksys router which is running at 11 - maximum connection)downstairs. I have NEVER had a problem until 2 days ago. I have added NOTHING to the computer.
I can sit directly next to the router (upstairs) and the CPU will drop, but not completely. When I plug into Linksys using ethernet, the CPU stops to 1% - and the computer resets itself. It will be fine the rest of the day. I have also had success unplugging Linksys for about 5 minutes (while sitting next to it) and that also seems to reset the CPU usage. HOWEVER - if I restart, either from warm or cold boot, the same cycle happens all over.Linksys gave me a patch, which has done nothing. They said if it was a Linksys problem, the patch would have fixed it.Microsoft can't help - it is a wireless issue.SBC can't help - it is a Linksys issueI haven't yet called Compaq because I am afraid they will tell me that the high CPU is due to a failing in my internal wireless. THE Presario 3240US IS 4 YEARS OLD AND HAS BEEN GREAT - NEVER ANY MAJOR PROBLEMS! Obviously, the computer is having to work too hard to connect to the wireless system, thus the high CPU's. And, when it runs high, I have problems with the internet slowing down. Anyone out there ever had this problem? Is it time for a new computer?
View 9 Replies
View Related
Jul 26, 2005
How can I direct the backup utility to use the CD-Rewritable Drive rather than the Floppy Drive?
View 2 Replies
View Related
Jan 16, 2008
We've got upwards of 400 workstations running Windows XP SP2. They also have the Novell Client 4.91 SP4 and network printers are managed through NDPS. Several months ago 20 new printers (IBM Infoprint 1532) were deployed across our LAN. Today I was told that the following changes need to be made by February: 1) In the printer driver properties, Enable the Duplexer 2) Under printing preferences, set Duplexing as the default. I was told that we techs need to physically touch each workstation to implement these changes.
View 2 Replies
View Related
Sep 22, 2005
How can I duplicate an installation of Windows 2003/Exchange 2003, to another machine having a different hardware configuration.
View 1 Replies
View Related
Mar 5, 2010
First, I had to make a small change to the SATA Mode from ACHI to IDE because if I didn't change it, it would crash with 0x0000007B BSOD. But after installing the Text part of Windows XP, i was moving to the GUI part and it said: Windows could not start because of a hardware configuration error. I am confused of what to do with it. I tried, fixboot, chkdsk /r, i even tried installing it again, but to no avail. Oh and one more thing. I had Windows 7 Ultimate at first in one partition. I installed Windows XP on the other partition, but it didn't work. In the end i couldn't even access my Windows 7 now. I need it for my school project.
View 2 Replies
View Related
Jan 25, 2009
I've used Microsoft Configuration a hundred times, no problems with that. I alway zero in on Startup check or unch0eck something and leave it at that.Tonight I noticed a tab marked "service" and investigated. There are lots of entries, all checked off, and many of them refer to programs long since deleted. What are these entries, can I uncheck some of tjhem, eg the ones belonging to programs long ago deleted? And most important why is this section separated from startup?
View 5 Replies
View Related
Dec 25, 2004
is there any way to get msconfig on 2000 pro
View 1 Replies
View Related
Feb 25, 2005
I am currently using windows xp on my computer. I tried to speed up the computer by making some changes in msconfig. I went to selective startup and unchecked some boxes in startup. The changes didn't make a difference after I restarted the computer. I clicked on diagnostic startup by accident, so I then clicked normal startup and restarted my computer. Now help & support will not work. It keeps saying that windows can not start help and support due to system files not running. I also can not log onto the internet. It says aol must download files first before you can access. I hit yes and nothing happens. I tried to run error checking and it won't let me because it says there are some things not running. I also went into system information and checked the hard drive and it says that it failed. How I can fix this would be greatly appreciated.
View 3 Replies
View Related
Mar 14, 2005
I am running Windows XP Pro. I was wondering If there Is a program like Microsoft Configuration that you can turn off programs for one use and keep It for another user? For example I have ghost I want It to run on my user but turn It off for other users. What I want to do Is setup a USER account for video editing and have no programs running.
View 3 Replies
View Related
Jun 23, 2005
I ran Microsoft Configuration and went to start up. Funny thing is, there is an entry with no name what so ever.
View 1 Replies
View Related
May 25, 2006
System Configuration Utility, Startup, dumprep 0 -k %systemroot%system32dumprep
View 9 Replies
View Related
Mar 25, 2006
When trying to boot up my xp pro I get the safe start or last known good configuration menu, no matter what i select it comes back to the same page. It won't boot up. Any ideas?. Right now my P4 2.4 512 memory is running 98se without a hitch on a 3gig hd while my xp 80gig hd is sitting on the shelf.
View 8 Replies
View Related
Aug 10, 2009
For a few weeks now, when I boot up I get the Configuration Recovery menu calling on me to select one of two profiles. I do that, selecting the first one which I guess you would call my default.But what do I do to boot up into Windows and bypass that Configuration Recovery menu?
View 8 Replies
View Related
Feb 7, 2010
Scanjet 3970 & Windows XP home. Had a "trogan horse" attack - supposedly had fixed; however, scanner would not work. Got message "An error occurred communicating with the scanning device". So tried to uninstall and reinstall. Now get message saying "The configeration data for this product is corrupt". Now what do I do??
View 1 Replies
View Related
Oct 16, 2006
In my "services" tab in my "system configuration utility" accessed via 'msconfig', I count about 75 entries all of them checked. Now, I know there a some of them that I need. example: "AVG Update Service". But there are many most, in fact that I haven't a clue about what they do or if I really need them. For example: "Cryptographic Services". What in hell is that? What I'd like to do is disable all the stuff that I don't really need, so that I'm not wasting resources. Thanks for any help anybody can give. If you really come through, another donation will be on the way
View 4 Replies
View Related
