i loss close to 100kb evry second, maybe even faster at times, i deleted some files and ended up having 1g of free space, within two days i was back to zero im not even dl things, when i do a scan with spy ware doctor and adaware, i see it looking through my c drive and theres like thousends of pornographic things that when i thy and serch for then in my c drive i cant find, i cant even run adaware or anything because it is never ending, it just shows all this bad stuff forever, i cant wait a week for a scan i just dl hijack this and im not really sure what its gonna help me but i did a scan and im gona send it just because thats why i see on this web site alot......the reason i know im loosing space is my os gives my a pop up message that im running low on disk space
I've had this problem for a couple of days. Every time I start a game like portal or team fortress 2 svchost.exe starts eating cpu. This goes on for a couple of minutes and suddenly svchost goes back to normal cpu usage.
I have 7 different svchost.exe processes in my task manager, 3 system, 2 local service and 2 network service.
I've downloaded process explorer and the svchost that takes all the cpu has the PID 1412, dunno if that info makes any difference but sounds important.
I've searched for svchost.exe to see if there are any more that could be possible viruses but i only found the one in /windows/system32/ I have no idea what could be causing this problem... Also, I apologize if there already is a solution for this in another topic. Didn't find any when I searched.
Just upgraded to XP Home. My 10GB disk was never over 5GB used with 98SE. Now the free space is jumping all over the place. Sometimes it shows 2.84GB free, and at other times as little as 200MB. Sometimes I get a Low Disk message. My disk is very clean and I keep it that way. What is eating up all this space? I was told this is a characteristic of XP. Could it be the Restore function? or what.
I know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
I reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
My computer operated windows XP sp2, and have 3 hard drives conntected 1. HD 0 is 160 GB divided into 2 partiotions, one 20 GB containing the system the other 140 Gb containes data directories and film directories2. HD 1 is 120 Gb connected through mobile rack and also contains data directories and film directories3. HD 2 is 200 Gb connected through mobile rack and contains only film directories.Untill thursday night everything was perfect, but when i I opened my computer friday morning i found the following1. HD 0 second partition all film directories completly disappeared and the free space is 40 Gb instead of the original 50 Gb
I got a trojan that attached to my browser. I managed to get rid of it by system restore.A few days later I noticed I only had 127 GB of my 300GB harddrive showing.I did manage to find the missing space though Disk Management. It was showing 170GB as unallocated space. I named it E: and formatted it.It now shows in My Computer as New Volume E: When I open E:I get 2 folders, Recycler and System volume Information. SVI will not open. It gives me an error, ESystem Volume Information is not accessable, access is denied.I am trying to find a way to either resize E: to 1GB or smaller and move that 169 GB back to C: or get rid of E: altogether and put all the missing space back on C:
currently I have 2 hds,running with windows xp, one is the system volume and the other is the boot volume, i want to make the boot volume both, how do i do that?
I have followed the wizard for system restore but having set the date and pressed next nothing appears to happen. How long should it take? I have tried this in safe mode as well
I loaded windowsxp-kb936929-sp3-x86i on my pc runninig win xp and after laoding it it contiuously started to reboot stating no operating system and harddrive to be found. it happen 2 me on laptop and pc
I was wondering this computer stays on all the time. I just put a new hard drive in and put the operating system on with the recovery cds. everything works great except for one problem. now 2 or 3 or 4 times a day when you use the computer, and no matter what you leave on when you walk away, like word or a site on the internet whatevert it may be and when you come back the screen is black and the error box that says no signal is on the screen. I made sure the graphics card has the newest driver, and the monitor is pretty new flat screen and always work well. I changed the monitor cable since it was saying no signal I figured it really had to be one of two things, either the monitor cable or the graphics card. My question is do you agree and will a graphics card do that when it is going out? will it work ok when you start the computer and then after awhile get no signal?
I am having xp in my c partition in my hard drive,if i copy windows 2003 from another hard disk to another partition means the two partition will work fine or not? shall i use windows xp & windows 2003 server.may i able to boot from both xp & windows 2003
internal hard drive delete all partition and create a ntfs partition. (due to some problem)I put the windows xp disc to boot ; Ntldr is missing. (boot prority set to cd)I extract Ntldr and ndtect from the windows xp disc and create boot.ini, then put all three file to the internal hard drive.This time it said hal file is missing.
about two yrs ago my dad made a massive mistake of making two partitions on my laptop, and giving the C: only 2gigs of the partition, and the D: 28-29gigs. I wanted to format my computer completely anyways, and would like to know how i can format my computer and merge these two partitions. I have the formatting disks, but it never goes to a screen asking me about my partitions, it just formats everything on my C: (my default drive), but keeps everything on my D: intact (games, files, etc.).
Recently upgraded my laptop to windows XP from ME. I first replaced my 5 gig hard drive with a 20 gig hard drive. I added another 128 memory module for a total of 256. For an old machine it really hums now. Three minor problems are bugging me though. 1. I lost the sounds from my modem. The modem works fine except for no sound. I assume that the sound is from the unimodem half-duplex audio device that is located on the Lucent winmodem. I have checked everything. The system says that it is working correctly. I cannot even find the driver for this on microsoft . I thought if I could load a new driver it might work. No such thing. 2. System restore didn't work until I erased all the memory points and reloaded the program. Now if I open siystem restore and click on "settings" or "help" System restore shuts down. I assume it is corrupted and would like to reload it.
I have 65 Computers need to format and install new window for the deployment this weekend. But unfortunately, 3 of these computers cant format and install new windows using installation cd. It can detect and boot from cd but when I hit any key botton to boot from cd after a minute the installation screen turn black then stop installation but the machine is still up.
My dell 9100 got a virus (Trojan horse XP antivirus) I got it off but avg anti virus would not update could not change the screen saver it posted and began getting the dreaded blue death screen problem has been detected and windows has shut down to prevent damage. the stop message is 0x0000008e (0xc0000005, 0xf84ca245,oxf808d7b4,0x00000000). So i reformatted the hard drive and when I go to reload xp it does not recognize the dell xp/media edition dvd. I have an XP home edition so I tried it and it allows me to get to the point where you partition the drive and then i get the same error message
After starting my pc i noticed what 99% of data in my hard disk has vanished. it used to be only a 1GB free space there and now it shows 38,8 out of 39 GB. I tried system restore in normal and safe mode. .Thorough description of situation: PC runs on Windows Xp SP2. It has 2 hard drives where the biggest one is paritioned into three drives: one for Windows installation, second was used for installation files of other programs (I kept Program Files folder there) and the alst one was dedicated for data storage. So the problem occured with the second drive. and as a result i do not have most of my programs running.
i had done this many times before but have never stopped at an error like this from reformatting and installing a fresh xp on to a harddrive. I was trying to reformatt a brand new xp onto the harddrive cause for some reason the old one won't load up to desktop and it says system32/config is missing or something and needs reapir but i had try to repair several times and it freezes. So when i put the xp disc in it ask me to press f8 to agree and stuff to install windows XP just after that, it says at the bottom searching for pervious version of microsoft windows, i had restarted many times and tryed again but nothing ever happens it just says it. I even tryed leaving it to load for 14 hours and nothing happened..... im guessing something from the pervious version of windows was corrupted so it wouldnt install a fresh copy. But i really need u guys help on this. Can someone tell me how to fix this problem all i want is a fresh copy of xp on the harddrive and all the windows gone.
I was just wondering, is it possible to install 2 versions of XP Pro on one hard drive? This is because i have 2 versions of XP Pro, one in English and one in another language, so i was wondering if it would work. Also if it is possible, do i make separate partitions for each OS? If someone knows any good sites which is about this topic or has good tutorials of what i'm trying to do.
I bought a new HDD for my Laptop and I need to image copy my old HDD to the new one. I want to do image copy so I don't have to install everything again.
My Laptop doesn't have a floppy drive, but it does have USB2.
Set a sub woofer with no magnetic shielding right next to my computer tower for about 10 hours or so. I mean you can see the sub woofer effect the monitor when your holding it from about 8 inches away, so should I be worried about my hard drive? The computer appears to be functioning normally, but still, it would almost seem crazy for it not to be damaged. I don't know what difference it makes but here are the specs
Windows 2000 pro Small master harddrive was full installed an old harddrive from another computer an 80gig axs a slave. it shows it is drive letter F and can open it I deleted all the files that were on it so it is empty. Itshows in computer managment but how do I get it so I can put folders, files and like put the antivirus on that drive, I think I did something wrong but don't no what it is. It shows in computer management as Drive F and I put it as NTSF like the master drive
I have been running Windows 7 RC beta on a new 1tb harddrive and installed XP Pro on a partition in the D:drive. When I rebooted all that I could get to reboot was the new install of XP Pro. Is there a way to select which system I can reboot from or toggle between them? Hope you can help? Thank you. I am running a Pentium 4, 2 gb ram, 1 tb harddrive.
I am running windows xp pro with all updates on a intel III 1000 processer with 2 250gb hds. my ISP runs an antivirus and I run Norton antivirus and Spy Sweeper. Late yesterday windows did an automatic update and I installed them. This morning I cannot boot on the hd with the updates. I reach the window that displays system info in b/w. At the bottom of this screen are two sets of two symbols a Y followed by an infinity symbol. On this hd I do not reach the point of going to safe mode. I booted on the second drive but it is not up to date (luckily?). I cannot determine how to remove the updates from the first drive. I tried System Recovery, I get a message that it is corrupt and do I want to send a message to Microsoft.
I'm getting extremely frustrated with a problem I keep encountering trying to install a new SATA Hard Drive. I connect the SATA HD power & data cable I prepare a FDD with the necessary HD Cotroller Drivers from the motherboard utilities CD I boot the PC I insert my XP Pro (SP2) CD The PC boots from the CD I press F6 when prompted for 3rd party drivers When prompted, I install the necessary drivers from the FDD I then get to the bit where I chose to install Windows rather than do a Repair - when I select install, I'm told that no HD is present & that I need to exit by pressing F3 I've tried removing RAM to see if any is dodgy but still encounter the same problem.
I've attached the new SATA HD to a different PC & everything moves on perfectly but I quit before formatting the drive as I want to do a clean install on the other PC. I'm beginning to think that there might be a problem with the Motherboard but am open to suggestions (the old HD is stuck in an infitinte boot loop & am unable to slave it to another HD as it wont respond - maybe caused by a Motherboard problem?).
After my last hard drive took a nosedive, I went out and bought a Western Digital Serial ATA 500 gb harddrive. I've physically put it in my Sony Vaio Desktop. I am trying to install Windows XP Professional now. When I get to the Setup screen is says Unknown Disk. I've already seemed to install the drivers for the new harddisk (they provided me a CD to install the drivers, it came with a program called "Lifeguard Tool" or something like that.
I have tried pressing F6 to install a RAID driver using the Windows setup... I pressed S... but then I find out I need a floppy disk drive... even if I had one, the box only came with a CD and not any floppy disks. I've tried slipstreaming Windows xp cd, service pack 2, and the drivers onto one bootable cd, it did not work... i'm too tired to go in there and find out why. *sigh*
Reformated and reinstalled windows xp. after instalation finished.i noticed i actually have 2 versions of xp home on my harddrive, how do i remove one without it effecting the other? i did this once before thur the reg ( i think) but i cant remember how.
I recently bought a WD 74GB Raptor harddrive to install XP on, but I'm having problems. Every time I load up XP setup from the setup CD, when it gets to the part where the installation options menu is about to appear, as it tries to boot windows from the CD, I get a BSOD and have to restart. I've tried running the CD with my other 80GB WD IDE hard drive inside and it doesn't cause this stop error. I've been screwing with this for 2 weeks now trying everything I can find on google and forums to fix this problem. I have the correct SATA drivers for my board as well for the drive of which I hit F6 for at the beginning of setup.
My question is simple, is there a way to pick some of the files on the computer (40GB of them) and somehow back them up on the hard drive, and the format everything else.I'm using Win XP. If it helps I also have Nero 8 with Back it up but I'm not sure if that's the answer.
My computers motherboard got fried a while back so I got a new one installed from a pc shop. They also reinstalled xp for me. Been working fine up until recently when I had to update norton. Once I installed my new norton and tried updating its protection it completely collapsed my xp so I had to try and re install xp mysellf only to find the same symptoms that many other xp installers appear to be suffering from. On installation process my hard drive was not detected. I tried other routes such as changing the bios settings disable sata control in the peripheral settings and I also tried making my own xp install cd including the drivers needed for the xp installl to be able to detect the hard drive but was unsuccesssful.
