I have a fairly new HP Pavilion Ultrabook 14-b011tx with windows 8. In the last few days I have started to have a problem if I tried to right-click on a picture in IE and use "save as" I get error 8007ffff. If I try to save the whole page I get an error that says unable to save webpage with no further explanation.
I have also noticed the file open/save dialogue will not appear in some programs - they just hang.
I am trying to open a webpage [URL]... in my laptop (Acer) but am unable to open it after entering username and password. I am able to open it from my another laptop (Dell).
All I am getting is continuous circling of java after entering my login details. In the laptop where it is getting opened, after entering my login details, I straightaway get a pop up of security warning of do you want to run this application - but not in where it is not getting opened. After entering my login credentials, Java message just keeps circling.
I compared java in both laptops,microsoft silverlight package, adobe flash,shockplayer,internet options,firefox options but still unable to proceed further after entering my login details.OS is Windows 8.1,jave installed is latest both 32 and 64 bits.Java verify is detecting java working fine,java settings shows it is enabled in browser I already uninstalled anti-virus and tried but still no success so re-installed antivirus.
I am trying to open a webpage [URL] in my laptop (Acer) but am unable to open it after entering username and password.
I am able to open it from my another laptop (Dell).
All I am getting is continuous circling of java after entering my login details. In the laptop where it is getting opened, after entering my login details, I straightaway get a pop up of security warning of do you want to run this application - but not in where it is not getting opened. After entering my login credentials, Java message just keeps circling. I compared java in both laptops,microsoft silverlight package, adobe flash,shockplayer,internet options,firefox options but still unable to proceed further after entering my login details. OS is Windows 8.1,jave installed is latest both 32 and 64 bits.Java verify is detecting java working fine,java settings shows it is enabled in browser I already uninstalled anti-virus and tried but still no success so re-installed antivirus.
Im new to the whole Windows 8 thing but am unable to load a webpage while connected to my home wireless.
Im using a hp envy dv7 laptop which was bought new. The wireless shows connected however webpages will not load.
I have plugged in a Ethernet cable and the everything works fine.
I am using windows 8 in virtual box and having problem in IE.
View 2 Replies View RelatedI was trying to change the permissions on theme1.theme and got the "Unable to save permission changes on theme1.theme" "Access is denied". I found that I could not take control as administrator but only as user????
View 6 Replies View RelatedI just tried downloading an exe file to the "Program Files" folder & was not able to in Win 8.1 pro. I get the attached message. I believe I was able to save files in this folder in win 7. I am the admin.
View 4 Replies View RelatedI have to go to task manager and close it down and open it again but I can't get any work done as I can't save anything. I just installed the windows 8.1 patch two days ago.
View 5 Replies View RelatedI was looking at all my installed programs on my computer. I noticed that Java is not on the list, so that means it's not installed yet.
So I went to Java.com to download it. However, when I clicked "Agree and Start Free Download", Google Chrome (the web browser I was using) shows a fail page. Then I tried all the other web browsers installed on my computer, i.e. Internet Explorer, Safari, Firefox and Opera. Unfortunately, they all showed fail pages as well.
Internet Explorer says "This page can't be displayed", Safari says "Safari can't open the page" with an error code of kCFErrorDomainWinSock:10054, Firefox says "The connection was reset", Opera says "This webpage is not available", and Google Chrome says the same thing as Opera ("This webpage is not available") with a different layout of text.
When I'm on the main/first page and put my cursor on a link (cursor won't turn into hand) then when I click it just started saying Opp's then top left circle spins then goes to a page to download something I don't want or bogus.
Another big problem, certain words will be highlighted and a window pop's up (different windows) and want allow me to go to the webpage I want.
This has been happening sense I purchased my new computer wit Win.8
Example: the words on the page highlighted is where I want to go, but a small window pops up and says Best cities to work or Free Local Job Search. Its has a icon to close the windows but when I do it will go to another download type page.
Is there a setting in IE or Firefox to turn that problem OFF ? See on this page there IS NOT a word that is highlighted and what I click I go to.
My daughter plays on Friv, a website with hundreds of games, most of them are FLASH based.
It frequently creates BSOD on my Win 8.1 desktop computer
I'm tried to use Google Chrome and the result is the same.
When I look with BlueScreenViewer, I can see it is always the exact same error.
It happened in in Win 8, Win 8.1 Beta, and now Win 8.1
Each time the OS was fully installed from scratch.
I have the latest BIOS from ASUS as well as all latest drivers I could find.
This new computer I've recently gotten comes with Windows 8; something I've never used before. I've noticed that, for some reason, the PC saves the last page (or pages) I was in, even after clicking out of them. Even going so far as resetting the computer or shutting it off completely, the last pages I were in start up upon starting up a browser. This has gotten incredibly annoying.
For example, if I were in Hotmail last before closing the browser, the next time I open the browser, it will load up the exact same Hotmail page I was on even though I have the homepage set to a different site. I do not want this to happen. Is there a way to shut this off so pages I X out of remain X-ed out of even after restarting the browser? Even if I don't close a page, if I reset or shut off the computer, I don't want to start at the same page I was on before. I want to start at my homepage. How can I fix this?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
IE11 seems to have a strange "Feature". When you close a Web site with an active download the whole thing closes and the download disappears -- IE 11 shows no windows open.
However press CTRL+J and you'll see the download lists again. If there's no activity press PAUSE and then press RESUME and then it should continue from where it stopped.
To some this might seem obvious but I've seen people re-start a 2hr download because they thought they had lost their currently active download when they accidentally closed the web site.
My computer is a windows 8 touchsmart hp.
It keeps saying proxy error unable to connect to the proxy but I've spoken tothe staff at virgin and they are saying its not a proxy error.
Ive tried the 74.125.225.179 and google loads just fine.
Unable to reinstall Windows 8 with Error code: 0xc000000f "File:Windowssystem32winload.efi"
I have got a problem in loading the operating system, only the following details are shown on screen.
My laptop is DELL VOSTRO, Model 3560, windows 8,64 BIT 3RD GEN i5
Recovery
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains error.
File:Windowssystem32winload.efi
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture.
Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware settings
When I press Enter OR F8 screen just flashes but nothing happens and I also tried to re-install windows 8, installation was successful but windows could not load but appeared that couldn't attempt the repairs.
I am unable to open any apps but the store and when I tried to uninstall and reinstall some apps I was met by an 0x80070002 error. It's not serious because I can use the apps on other users, but it would still be nice to have it fixed. I really don't feel like resetting my system.
View 8 Replies View RelatedI am unable to install the drivers for my NIC's getting the error 'Invalid data as shown in the images below'.
It has previously been working fine on all adapters but I needed to uninstall the network cards as HyperV was throwing up an error when creating virtual switches which may have caused this?
PS C:UsersJGAdmin> get-netadapter
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed
---- -------------------- ------- ------ ---------- ---------
Ethernet 40 Intel(R) PRO/1000 PT Dual Port Netwo... 117 Not Present 0 bps
Ethernet 39 Broadcom BCM5709C NetXtreme II Gig...#2 132 Not Present 0 bps
Ethernet 38 Intel(R) PRO/1000 PT Dual Port Net...#2 131 Not Present 0 bps
Ethernet 37 Broadcom BCM5709C NetXtreme II Gi...#50 130 00-26-55-1A-A8-4A 0 bps
Ethernet 34 Intel(R) PRO/1000 PT Dual Port Net...#3 127 00-1F-29-56-C2-51 0 bps
Ethernet 33 Intel(R) PRO/1000 PT Dual Port Net...#4 126 00-1F-29-56-C2-50 0 bps
vEthernet (VLAN3 (Desk... Hyper-V Virtual Ethernet Adapter #3 71 Not Present 00-1F-29-56-C2-51 0 bps
vEthernet (VLAN2 (Serv... Hyper-V Virtual Ethernet Adapter #2 64 Up E8-39-35-14-23-2C 10 Gbps
I have tried numerous drivers with no luck all getting the same error.
The box has alot of data on it so I would rather not have to do a clean install.
I have just upgraded from windows 8 to windows 8.1.I now find I cant back up my pc.I have tried 3 separate external drives to download to but each time I get the message I/o device error 0x8007045D.
View 3 Replies View RelatedI move a lot of files around on my computer between different files and between hard drives for organization purposes (running Win8) and about 1/3 of them lately will display this error when I attempt to drag and drop from one folder to another "The action can't be completed because the folder or a file in it is open in another program" but these files are NOT opened or being used by another program...it's completely random and if I try again after about 15 minutes or so then I will magically be able to drag/drop the files...
View 4 Replies View RelatedIn continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
Alright, so I was in another OS, and decided to copy over some files. The problem is when I got into Windows it gave me disk errors. So I allowed Windows to repair them automatically, and everything was dandy. But the files that were transferred are nowhere to be seen on both Operating Systems, but the disk space is still being taken up (About 100GB) so how on earth do I get rid of this phantom space?
View 9 Replies View Relatedi was able to get as far as having the px load from camera to computer & somehow all px got installed into the computer but only temporarily ! While camera was still attached to tower, I clicked on Control Panel/Computer/then the list of programs in computer and then i saw the name of the camera (cannon Power Shot) ...then Cannon 100, clicked on that and then saw all px - was able to individually email some to myself but when i detached cable from tower to camera and went back to ''Computer'' found Cannon 100 but no px were there -so obviously i wasn't able to save them.....but strangely enough 3 of the downloaded px were in the ''DCIM' folder (whatever that term means)...but i don't know how those 3 got there ! So i got far enough to download & 'view' but don't know how to ''save'' the px in the computer for future viewing without the necessity of attaching the camera....besides i'd like to delete some px from the camera once saved into the computer.....I'm so used to XP
View 3 Replies View RelatedI'm into photography and when I take pictures and put them on my computer they usually have the same name as several other pictures I've taken. In Windows 7 when I would transfer files from my memory card to my computer it would give me the option to 1) Skip saving the duplicate files, 2) save over them, and 3) keep both files and then it would rename the new file with a number after it (such as DCIM 102 and DCIM 102 (2))
In Windows 8 it seems like I only have the options to 1) skip saving the duplicate and 2) save over the duplicate....since I want to keep both files, what do I do?
Most of my pictures aren't really themed or anything, so there's not really a need for keywords, like "Birthday blah blah" or "flowers yada yada" etc. Anything similar to the "save both files"...?
In the past whenever I would press my Win-key and PrtScr-key, it would make a copy of my desktop and automatically save it to a folder. I'm not trying to copy it to the clipboard, Win has a feature that will allow you to make a copy of the sreenshot and save it to a particular folder called Screenshot.
Anyway, I just recently upgraded from Win 8.1 to Win 8.1 Pro w/Med Ctr. After which this has stopped working. I use this feature a lot.
Not sure if my image insert worked, but here's what I'm trying to get to work again. I am aware I can use the Sniping Tool, but it does not work the same.
I am using time freeze program and at same time I am using an free vpn service which pasword changes per week. The time free program has an option to keep some folder and files non freez while freezing active. For instance while freezing active user can select desktop to not be frozen by this way after restart pc will not delete changes done on desktop. My main problem is that after a week later I have to defreez the pc type the pasword and refreez the pc. If I know where the pasword of vpn kept I will able to overcome on this problem.
There is a location with path %userprofile%AppDataRoamingMicrosoftNetworkCo nnectionsPbk that contain vpn configurations except user name and password. I need the location that store user name and password.
How to change the "Save As" directories in Libraries.
Basically, i have 2 drives running on my laptop being :
- C Drive: SSD ~ i want this to store all my system information + very frequently used programs.
- D Drive: HDD ~ to store
* My Documents,
* My Pictures,
* My Videos,
* My Music, +
* Games + etc.
The problem now is that all the directories above are pointing to C Drive as their default save location. How to change this so that by default, all the files above will show "Save As" in D Drive?
I'm running Win 8.1 with IE 11 and for some reason, my homepage started to show up a about:blank. I go to Internet Options to fix this (MSN.com) and hit Apply. It looks like the change is made, but when I close the Options window and reopen it, the about:blank page shows up again in the homepage URL field. The same problem occurs if I simply close and reopen the browser. Rebooting didn't work and I got an error message that System Restore couldn't do a restore for my last restore point for some reason.
How do get the browser to save my homepage URL? Can I re-install IE 11 if there is no other option?
I've been having some major trouble with all of my programs. At first I thought it was just with my Adobe Creative suite, but then I noticed it was happening on my Office Suite. Then on firefox, IE, etc.
Every time I open up the window to save or open a file from a specific directory, the program crashes. Resetting my computer works for a while but after a few hours, it goes back to crashing all my programs. I'm getting very desperate as I have some looming deadlines and this is really affecting my work.
I've tried 'refreshing' my system and it says my drive is locked...
I've tried restoring a backup but get an error...
I've tried formatting my system and it says a partition is missing...
I'm on a new laptop running Windows 8 Pro, and I'm running into permission issues. I just created an icon (using Axialis Icon workshop), and tried to save it to a folder which I myself created. But I got this message:
C:Program FilesIconsIN-USEGS.ico
You don't have permission to save in this location.
Contact the administrator to obtain permission.
Would you like to save in the My Pictures folder instead? No, I wouldn't like to save in My Pictures. I never use it. How can I get permission to save to the folder I want? I'm a sole user; I'm a member of administrators; I've tried (unsuccessfully so far) to give myself permission to run all programs without being nagged.
I suspect that taking ownership of the C:Program Files might do the trick, but it seems like an extreme measure. Should I simply follow the steps in Brink's tutorial 'How to Allow or Deny Access Permissions to Users and Groups in Windows 8'?
Now every time launching an old program (i.e. The Simpsons Hit & Run) it loads veeeery slow and I have to always manually set the affinity to two CPU's instead of four and then program runs faster, especially the load time, it loads waaay quicker.
So how do I set the affinity and it always stays like it, even after restart.