I'm having WIndows 8 Pro N, I encountered some issue here that Windows will boot into black screen quite sometime.
The moment when I tried to perform a restart or switch on my laptop, I could see the Windows 8 logo and then the screen just turned black. CTRL ALT DEL doesn't work and what I have to do is perform forced shut down.
After I switched it on again, everything just worked fine. The frequency of having the problem is 50%.
My laptop has been acting really weird the last couple of weeks. It would crash randomly, and sometimes when I picked it up to put it somewhere else, it crashed too.
Now, I thought this was a problem with Windows 8.1, because it didn't behave like this before with normal Windows 8. So I Refreshed my laptop, and after that it worked again, without crashing.
I left it in sleep mode while I got some sleep too, and when I booted it up this morning, it crashed again.
After that the whole laptop wouldn't boot up, and now the only thing that shows is a cursor on a black screen, and it seems to be stuck in sleep mode, because I can't even turn it off completely manually. So I can't access the BIOS or make it boot up in Safe Mode.What the hell should I do?
Specs:
Toshiba Sattelite L50-A-15U
Windows 8 64-bit
Intel i7 4th generation processor with Intel HD4600 graphics card
My sister has a Satellite C55-A5281 with home premium 8.1 x64. She recently did a system restore now the screen just goes black after this BIOS screen.
When booting, my windows 8.1 is slow to do load. After windows logo, it goes to a black screen for around 10 secs, then it finally logs into the Start menu. I know this is not normal because I have seen the system boot faster in the past, but I don't know why its doing it now.
I have done a fresh install of windows 8 and update to 8.1. I made to to have Fast Boot enabled.
I have haswell, so I made to update to the latest graphics drivers by Intel.
On a second note: I am triple booting: osx/linux/win with Chamelon boot loader. However, I doubt its an issue with triple boot because the black screen occurs AFTER windows logo, meaning windows has successfully loaded.
My windows 8 pc when booted, mostly freezes after i see my account picture with a circling dots. Then appears a black screen and just my cursors, but nothing else. I try to get task manager and run explorer.exe but it doesn't work. It has now been happening very much. I have installed the OS just a few days back and i got this issue. This also happens when i sign out/switch from my account to another account.
I run Windows 8.1 and I have a problem that surfaced recently. When booting it shows the blue windows logo, showing that it's booting obviously, but after a few seconds it goes to a completely black screen that lasts for anywhere between 5 and 10 minutes before it goes to the lock screen. My system specs are pretty humble I admit, you can look at my specs, but it was never an issue as Windows 8 and 8.1 used to boot completely within 30 seconds max. I suspect it might be a problem with disk space as I have only a 250 GB hard drive with 4 GB free space.
I used to have two hard drives; a 1 TB and a 500 GB. Due to too many power failures in this pathetic country called South Africa, both of my hard drives died completely from too many write and read errors and corrupted partitions. I salvaged the 250 GB hard drive from an old PC of my aunt's as I could not and can still not afford a new hard drive. Having to wait 5 - 10 minutes to use my computer is just plain frustrating to say the least. I have already cleaned all of the junk and useless files on the hard drive, what's left on it is all stuff I can't afford to lose or delete.
Today I uninstalled MS Office 2010. After doing this it informed me I had to restart Windows 8 for all changes to take affect which I did. Ever since I have not been able to get into Windows 8.
Essentially I turn on the PC, I see the HP logo, and then Windows 8 goes in an endless black flickering screen loop. I have closed the laptop and pulled the battery to see if that was the issue, but it was not. Considering it was running normally before hardware wise I believe something went wrong with Win 8.
I lack a Win 8 disc and lack a USB DVD drive regardless (laptop does not have an internal drive) and reinstalling Windows is out of the question as I have data I need on it.
When I boot or reboot my PC, it is a slow process, the time with the blue window and the spinning circle is only about 5 seconds, but then there is a pause of 30-35 seconds where absolutely nothing is going on. Black screen, no activity at the SSD or at the net. After this my USB mouse and keyboards wake up, and only a few seconds later my PC is running normally.
I have allways (in windows 8) had that black screen, but only for a few seconds. After Windows 8.1 this "dead screen" just getting longer and longer. I have had it for some times, but I used to use Intel Rapid Start, so I did not care. Now I got som faster ram, and Intel Rapid Start don't work with this ram, so now I have to boot every time, and now I'm not so happy with this long pause in boot.
What is Windows 8 doing in this time? How to eliminate it (or just get it reduced)?
It seems Windows 8.1 doesn't like my old graphic card drivers like Windows 8 did. In many cases when turn on my machine it boots to desktop but it doesn't show it - it just shows my mouse cursor and pure black background. When i click the power button tho, the desktop pops up for a second then the shutting down screen appears. After few reboots i finally managed to get to the desktop and use my computer (chances are 1:5 reboots lol).
I followed some tutorials i found on the internetz , explaining how sometimes ATI and NET framework 3.5 doesn't work together - this is not the case 'cause i tried following this tutorial to uninstall , clean and reinstall the latest drivers available for my crappy videocard + NET framework. Didn't worked...
I noticed something interesting while booting to Windows. IF there will be black screen with cursor - the boot time takes 1-2 seconds, IF everything will be alright - the boot process will take about 25 seconds. (just thought i should tell you this as well)
And finally here's my configuration: Pentium 4 , 3.2GHz ATI Radeon X550 2GB DDR2 RAM
For a few days I have been having some problems with my computer. Whenever I shutdown properly and then start again, the Desktop loads fine and after a few seconds of coming to the desktop. I see a black screen in front of me, I try to press num lock on and off to see if the system froze, it indeed froze. I disabled fastboot, after that even if I start after shutdown, it boots fine.
If I restart, it boots fine. Not sure why as my system should be fully compatible with fast boot. Here is my system specs, everything is updated as of posting:
MSI Z87 - G43 Gaming Motherboard with latest BIOS Sapphire TriX R9 290 OC Samsung 250GB 840 EVO 8GB RAM
There's this bugcheck that forces me to refresh install my Windows 8 installation. Everything was normal until I restarted my system and it takes longer time to boot. The screen stays black after boot logo disappearing, until I saw a BSOD.
Attached below is last and the only dump file generated while BSOD occured. I need to know what's the real cause so I can prevent it in the futures (this is like my third time to refresh install in less than a year...)
Note that I generated this diagnostic after refresh install so it might be irrelevant to crash dump attached...
I have black screen on boot , the boot logo doesn't appear , I can't access safe mode , black screen on recovery too , i tried to boot to reinstall the windows , the logo appears and start running , but black screen after that , I don't see the windows to install or to repair my laptop ! i tried Dium , which is a live session to repair laptops but can't access , black screen too i have a Hp Pavilion G6 , UEFI ...
I have a samsung laptop. I turn it on and I can see the bios screen. After that, the screen just goes black and stays that way and doesn't boot. I am able to get into BIOS and I can see all bootable options. I am not able to get into recovery settings or the advanced boot menu.
I burned my Windows 8 iso to my flash drive and plugged it into the computer. I tried automatic repair with it and that didn't fix it. I tried doing a system restore, but it failed saying "System Restore failed while copying the registry from the restore point. The registry in the restore point was damaged and could not be restored." The computer was working during that restore point that. I will try another one though.
It appears that something is corrupt within Windows, but I'm not sure exactly what. I can issue the command in command line, since I can boot to my flash drive, but I'm not sure what files I need to fix or if I'm correct.
I tried updating to Windows 8.1 Update 1 and in didn't go through properly (it hard froze and crashed) and now won't boot past the BIOS. I cannot get into Windows and I cannot get into the Recovery Menu.
I tried recovery USB's and any I create either from a 3rd party or Windows itself results in loading to a black screen with a mouse cursor. Only one worked, Acronis (probably because its Linux) and it showed all the drives ruling out a hardware issue but sadly it cannot repair Windows.
So it seems I might be a victim of the black screen issue some had when moving to Update 1.... BUT the difference is I cannot boot into the recovery menu at all and any recovery media boots to a black screen.
How to get out of this screen and actually boot into anything which will allow me to try to fix the MBR or go back to a restore point.
I thought the point of recovery software was that it loads no matter how corrupted Windows is... obviously not! Something is stopping all of them booting properly.
I've having an issue that I think some ppl had, windows 8 crashing going to blue screen of death or blank black screen and then it restarts by itself, also I have noticed that it says repairing disk in D:/
I have one SSD 120gb in the C:/ which it host the operating system and some minnor programs, in a HDD which is my D:/ drive there I have my games.
ASRock 990FX Extreme 9 AMD FX 8350 Kingston Hyper X 120GB SSD WD black 500GB HDGB HDD Corsair Vengeance 8gb Ram 2133Hz Windows 8
When I turn on or restart my computer after the teal windows logo with the spinning wheel the screen will flash off quickly then come back on black and then 10 seconds later show the lock screen.
I upgraded from Windows 7 to Windows 8 Pro. Everytime or almost everytime I click on an app or go to the desktop and try to get on IE 10 (desktop version), my screen flashes and goes black for a few seconds then returns me to the screen with the space needle, then I click on it and it signs me back in. When I try to use Google Chrome, the websites freeze up on me. I don't want to have to reinstall/reformat as I paid $40 for this for one, and secondly, I don't want to have to repurchase Office 2010 as my licenses ran out. I ran every update that comes up and restart, but this doesn't change this issue. . why it does this and any way to fix it without reformatting?
Just had this new laptop running windows 8 and its an Acer.When I select the photos tile on the screen it goes to another screen which is black with a blue square icon and underneath it tells me that there are no files or folders in this view.There are photos in my picture folder as I just put then in.But if I go to the other method and select the My picture folder the photos are there.
I have recently installed windows updates and after restart the black screen occurred after I typed my password. About five days before that I have reinstalled my Mobile Intel 4 series driver and now in Device manager it shows 3 grayed out monitors which were installed when I have reinstalled the Video driver. The monitor driver that Is currently loaded was installed when I installed the OS itself.
I've recently installed a dual boot, Windows 7 and Windows 8. The installation went fine but then after a very short time my Windows 8 Screen goes black. I had to press the power button to exit.
I've checked the Power settings and ensured the "Turn off display" was "never". I also updated my Video drivers thinking that might be the problem. Both to no avail. I've done a "Refresh" and a "Reset (which took 3 hrs). Again, all was fine for a short time, but while exploring the OS, again the black screen.
I followed... re-formatting the hard drive during the new installation, trying generic video drivers and doing Resets and Refreshes. None of that worked and still doesn't. The installations do complete as before, but I don't have enough time to download new updates to perhaps correct whatever problem(s) there are before all goes black after a few minutes. As I stated before I have to hold down the power button to exit.
If this is a clue, once the screen goes black and I revert back to Window7, before loading, the File System on ALL drives, including C and the Windows 8 partition has to check for consistency before Windows 7 boots up.
I've been quite busy and haven't had a chance to try re-installing again until now. Thinking the problem might have been the actual drive I used for previous attempts (it was a SATA external drive which by the way I previously used for a dual boot Vista/with Win7), I then created new partitions on 2 different USB connected external drives and attempted to install. It wouldn't do the install on either one. I received messages "Setup does not support disks connected through USB or Firewire,.... my USB drives are connected directly to computer not a hub. So I'm forced to use the SATA created partitions for the installations. (Disk 1)
If it makes a difference, through Disk Management, I've deleted the Windows 8 installs from those partitions then re-created a "New Simple Volume" before trying again. I even tried creating another partition on C but it wouldn't allow an installation saying it was a dynamic drive. Prior to me creating that additional C partition all were Primary but now they're all Simple Volumes as per the color codes.
I have two OEM Windows 8 installation disks, I've tried both.
Just installed 8.1. When I logged back on, there was only a blank screen with a cursor. I activated task manager and a warning appeared stating, "?CreateRect@Value@DirectUI@@SAPEAV12@HH... could not be located in the dynamic link library C:WindowsSystem32Windows.UI.Immersive...
SFC scannow fixed the issue for awhile then i got force logout then i login the same issue reappear... I dont feel like doing fresh install ...
I loaded Windows 8 x64 about a week ago, it has booted fine every day until this morning. Instead of the loading windows logo its just a black screen that never does anything, I tried safe mode but F8 does nothing. What would cause this? It loaded just fine about 10 times, the only problem I had was with the installation I had to disable the hyper-threading to install the 64-bit version.
I will just be generally using my laptop browsing the internet or using programs such as photoshop and my system will freeze up for about 10 seconds and then will turn to a black screen forcing me to shut the system down via the power button. This happens at least once a day and most commonly occurs when opening photoshop. My laptop is a Packard bell EasyNote TE69KB.
always it happens that on the startup of windows 8.1 (and also when it was installed windows 8 before the windows 8.1 upgrade) after the republic of gamers logo and before the appearance of the lock screen, the monitor remains completely black for 5 minutes about (after that appears the lock screen and windows works again well). Usually Windows starts itself in 10 seconds about. During the black screen commands don't works. Can be the use of cc cleaner, that cleaning temporary files, creates this problem? I tried to reinstall the last version of the Nvidia display drivers but nothing changed. I took away all those unuseful programs from the windows startup.
I have a Asus ROG G750JX-CV200H Notebook bought 2/3 weeks ago: Windows 8.1 home Core i7 4700HQ RAM 16GB DDR3 Nvidia GeForce GTX 770M HDD 750GB 7200rpm
I was casually using my pc and it suddenly shutdown. I tried to restart it, but it's stuck on black screen. Here's the thing there was no windows logo or no bios or no nothing appeared on the screen. It just goes black even if I restart it a hundred times. I am sure the cables of the monitor are fine and I am also sure that there are signals coming from the pc.
P. S. I even ASSUMED that the pc must have switched on and typed password to login and waited enough to get it to sleep mode and then recover from there. But still no luck.
I purchased a Lenovo G400s Touch laptop a couple of weeks back. I am running Windows 8.1 (Windows 8 came pre-installed and hence I don't have a Windows CD) / Intel i5 processor / 4 GB RAM. Video cards: Intel HD Graphics 4000 and Nvidia GeForce 2GB
Since the last two days I am having a problem where when I restart my system it automatically gives me a black screen, nothing happens at all and I have to shut down my laptop by pressing the power button and then start it again.
Refreshing my PC is my last option as I shall lose a lot of apps and other stuff.
I went to the recovery section. Advanced startup. After I clicked on refresh my screen went black..and it's been already 20 minutes and I don't see anything at all..only a black screen..
For some reason after I sign into my user on my desktop, A blank screen appears and nothing loads. I tried the avast configuration since I'm using avast but it didnt work. I tried scanning the system in command promp and it says one corrupt ile was repaired...
I built a custom pc recently and I decided to get Windows 8.1. I built the pc and installed Windows 8.1 no problem. Rebooted after install no problem. Updated my graphics card drivers (tried playing minecraft and it said I needed to) and rebooted, no problem. Then, the next day when I turned it on, it booted onto the start screen, before the login, I clicked to continue to login and it went black. Everything but the mouse. It would flash on and off every little while.
I could move the mouse off the screen to the right and bottom, but not the top and left. I rebooted, same thing. One more reboot, and the splash screen is different . It says "Please Wait" on top of the loading circle thing. It says Recovery. I click advanced settings and continue to windows 8.1. It reboots and works fine. Until next time I turn it off and back on.
These are my specs, if needed: AMD FX-6300 6-Core 3.5 GHz ASRock 980DE3/U3S3 2x4GB G-Skill Ares DDR-3 1600mhz Gigabyte Geforce 650 Ti Windows 8.1 64-bit (obviously)