It just continuously shows the loading screen and if I look at the task bar there are 2 windows stores there. If I close one, then open the other, the one I closed comes back. But if I close the other they both close.
View 4 RepliesI have recently built my own pc.
Operating system is windows 8.1
motherboard is ASROCK FM2A58M-HD+
500 gb hard drive and 4 gb Ram
For about the last week or so my Norton 360 has been picking up a threat, every time I turn my pc on. I thought Norton was getting rid of It so I didn't pay to much attention until my media player kept playing up and certain programs wouldn't load or take a long time, so I did some research and it turned out to be a trojen. anyway I have tried to put my pc into safe mode and have restarted my pc. my operating system wont load back up.
I have a red screen with a power button that gives me the option to restart or shut down. and there is a ease of access button. I have tried repairing with the original disk but it say my hard drive is locked. and it wont let me reinstall it either.
Here is an issue I have run into since I side graded to 8.1.Pro on one of my machines. I expect the other machine has the same issue but I mostly use 7 ATM. I have some XP virtual machines that were created by importing the image of XP into VMWare Player and now those VM refuse to run with the following error.
It is obvious the VM was based on the XP machine from Windows 7 Ultimate. How can I fix this as XP Mode does not install and Windows 7 is no longer on this machine so I can't point the program at the file on another OS drive?
I cannot load programs via the web (this may also be true of programs from disc) I have tried to install programs from Bank Tree, Dassault Systems, and numerous others and they all freeze during the initiation stages, I have tried installing in safe mode but this will not work as due to the safe mode, something is missing, so I turned off the firewall but this had no effect at all, this situation is driving me mad I'll bet it's the pesky Windows 8.1 that is the problem.
View 12 Replies View RelatedMy pc shut off today all of a sudden, it was running normally, and next time power on windows would not start up normally. the power turn on as normal, windows 8 blue logo show up with circle running for 3 seconds, then screen would show a sign losing signal from monitor, then screen would turn dark, nothing going on, power still on, no beep, no sound or anything.
I am running windows 8 retail with license bought from Microsoft on ssd, and windows 8.1 enterprise rtm on a separate drive. Normally there are 2 items on blue boot menu.
I managed to log into safe mode, everything is still there, icons and files, installed software. I checked boot record and there are still same as before.
My problem is that my computer no longer is able see Windows 8.1 on bootup. I get a "Loading OS".... message and nothing happens.
Before this happened, I reset my computer from Windows with the intent to change a BIOS setting for the CPU fan and an Windows update was applied on reboot. Windows (apparently) installed the update and then I got to the login screen. At this point, instead of logging into Windows, I hit the reset button to make the BIOS change. After doing this, when I tried to boot again, Windows would even begin to load and I got the "Loading OS" message immediately. Is it possible that Windows did not finish installing the update even though I was at the login screen for Windows 8.1?
I then booted from the USB flash drive with Windows 8 install files (not 8.1... I upgraded from 8 to 8.1). I went into the repair option and then I got the message that no repairs could be found or were needed. (Interestingly now when I try the repair option, the computer automatically reboots so the repair option appears to be very broken now.)
Next, I tried to see if my disks were working and they seem to be. Attached is a screenshot when I list the volumes. C: drive is a HDD data drive without Windows. D: drive appears to be some sort of system restore partition (as far as I understand). F: drive is the SSD with Windows installed on it. I can navigate through all directories fine on the SSD and the drive seems healthy. (E: drive is the USB drive.) When I unhook the data drive, all the letters get shifted up one and this does not seem to be a factor in reviving Windows. Are the drive letters important? I find it odd that the SDD does not show up as C drive with or without the data drive installed.
I tried the sfc /scannow option in offline but I cannot get it to run. I believe that I am entering the letters correctly (and I have tried different variations). Please check if I am not typing this in correctly given my drive letters.---How do I get this to run?
I also tried to apply the Windows System Restore option on my flash drive, I seemingly was able to restore to a restore point set this morning. However, Windows is still not found at bootup at all.
At this point, I'm at a complete loss on how to proceed short of reinstalling Windows. Other options from the Windows 8 repair screen seem to result in loss of programs or data.
For the record, my motherboard is a Gigabyte GA-870A-UD3. I tried restore some BIOS settings to no effect.
I'm running Windows 8 and Office 2010. I can't open Excel, Publisher or Powerpoint documents from Windows Explorer or from emails attachments. I can run Word without problem from Windows Explorer.
The files run fine from within the programmes.
An Office window comes up and tells me that the product required is not loaded on this machine. Graphics are attached.
It has a button beside the label saying "I already purchased Office 2010". I click on this button and it asks me to run the installation programme. The following message comes up, "You cannot install the 32 bit version of Office 2010 because you have The 64 bit version installed......"
Win 8.1 64-bit , 8GB RAM
Tevion 8 GB USB Drive
Plugging this drive in while windows is running has no ill effects.
Whenever the USB is left attached during a restart or shut down. the pc fails to load windows. It just has a blinking cursor on the black screen.I have 5 more USB drives that don't affect windows loading at all. So I'm pretty sure it isn't in the BIOS.
All of a sudden, after installing some software updates, Ubuntu tells me to restart. I restart, load Ubuntu perfectly, then decide I want to use Windows to play a game. Restart, select Windows partition in Grub. The Toshiba logo comes up, as usual, but it doesn't boot into Windows. The scrolling wheel just keeps turning. I go to BIOS, and try enabling secure boot, to see if I can boot Windows like that. Same problem. Go to BIOS a second time, change the boot type to CSM instead of UEFI, to see if that will work. It comes up as a black screen "Failed to load media". I switch it back to UEFI and disable Secure Boot. Now all of a sudden, Grub doesn't come up, it just goes straight to loading Windows, but same problem. I ran Boot Repair from a live USB, didn't work.
I am able to use Ubuntu now, but only by pressing F12 and selecting it. Windows still won't boot. I made a recovery USB, and I tried to refresh my pc but it said drive was locked. I don't know what to do.
Here's my Boot Info: Ubuntu Pastebin
I have a Toshiba Satellite.
This ONLY happens to the windows 8 and none of my other computers, this happens to a lot of people and on other forums they say "Change your MTU, set subinterface "Wireless Internet Connection" mtu=1492 store=persistent" but that DOESNT work, It says theres bad syntax even though i type it the exact same way I see it. what is "Wirelesss Internet Connection" ? do I put the name of my connection? How do I know if 1492 is the right number?
View 6 Replies View RelatedI just checked in my device manager and found and new device installed that I didn't install. It's a WAN miniport (Network Monitor) #2, which has the yellow triangle and exclamation point in it. Windows can't laod drivers required for this device. (code31)
I don't have any wireless hardware on my PC. This was installed on 5/15 and I believe it came with the last the 8 auto updates (18 of them I think) because the dates match. It wont update through device manager, it wont uninstall.
I just purchased a new HP laptop and it has Windows 8 I am a police officer and have access to a program called Coplink normally on other computers I would just type coplink.chattanooga.gov/ in the webpage bar at the top of IE and when hitting enter it downloads it and saves it to desktop then I can just click it anytime and login but it doesnt do that on my new computer I guess because its Windows 8 I cannot get it to save and load it looks like teh file is .JNLP
View 3 Replies View RelatedI have a Dell Latitude E6500. Before tonight, I was running Windows 7. I decided to update to Windows 8 and now I am unable to get any web pages to load. My wireless is connected but no pages will load when I open IE.
I can't imagine I am the only one who has run in to this.
Maybe it's a device driver; but I can't get to the Dell site to do any diagnostics.
I've resisted updating to Win 8.1 since it's release, Win 8, for me, is confusing enough! I finally decided to update to Win 8.1, downloaded/installed it, and now, periodically, pages won't load while browsing the Internet. It hangs up for 30 seconds or so then shows "This page Can Not be Displayed." I click the "fix" button to repair whatever is wrong and get the same explanation, "You are not connected to a network," close the information box and the page I was going to comes on. I watch my Network Connections while 8.1 is "fixing" the problem and it always shows I'm connected. 8.1, while "fixing" the problem, will disconnect my laptop from the network, momentarily, then reconnect it. It will work fine for a few minutes then it starts all over again. I have a second Win 7 laptop I run at the same time to see if it also gets disconnected and it runs fine, while the 8.1 machine is supposedly not connected.
I didn't have the problem before I downloaded 8.1. I don't have the problem on my Win7 laptop or desktop PC.The problem happens at all times of the day/night and at no specific time.
I am using windows 8 and I am connected to the internet, according to my little bar image in the bottom right, but my internet explorer will not load up.
I am using my partners laptop (which is connected to the same wireless network) to respond.
I try to boot Windows 8.
Code:
Windows could not start because of an error in the software.
Please report this problem as :
Load needed DLLs for kernel.
Please contact your support person to report this problem.
And I can't boot Windows 8 .....
When I ran a video with subtitles in Windows 7 over RDP, the video worked perfectly but my subtitles didn't load. But when I played the same video in Windows 8 over RDP, they did.
Is there something...different about Windows 8's RDP that allows this to work?
I'm using an Asus N550JV running Windows 8.1.
Recently, whenever I restart my computer or shutdown->startup, I notice that startup programs (e.g the Logitech Application for my mouse, Google Drive sync etc) do not run unless I sign out and sign back in. I can constantly replicate this.
I'm not sure if this has to do with me disabling hibernation (I did this on day one of getting my notebook).
The problem with this situation is that I disable my touchpad because I have a wireless mouse, but on occasions where I don't have a mouse available, I can press the Asus instant-on button and I have it set to toggle the touchpad on/off function. Because the startup services aren't loading, I'm unable to use that button now and I'm stuck using my keyboard to try to manually turn it on.
After Windows 8.1 downloaded and installed an update and also SQL Server 2012 SP1, I restarted it and then it no longer booted. The BIOS splash screen would pop up, then the screen went black and nothing else happened. Even the hard drive activity stopped.
I booted from the Windows 8 DVD and chose Troubleshooting and tried Automatic Repair and System Restore, neither of which worked. I then chose Refresh Your PC. However, it then said the drive was locked and I should unlock it before continuing. I used Diskpart to clear the attributes of the volume but that didn't work.
In the end, I did a reinstall without formatting the disk. Once I booted it up properly, I had a look in the Windows.old folder and all of my documents, pictures and other work are missing.
Firstly, is there any way I can roll back to the original install so I don't have to spend a full day installing everything again, and if not, how do I recover all my files?
I need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. How to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver?
View 1 Replies View RelatedI have had my Windows 8.1 Pro x64 install since February. Now I think it is time to deal with this once and for all.
I have an extremely powerful computer, 3930k, 64gb ram, RIVE, 840 Pro SSD so hardware is not the problem.
I recently got another Windows 8 (enterprise) laptop (not 8.1) to compare with, and it boots at exactly the same time as my desktop, but the laptop loads all startup items within 1-3 sec, but my desktop takes as said 1 minute and 20 seconds each time.
I have used this guide and many similar: Startup Delay Time - Reduce in Windows 8
I once changed the value to 10 minutes in milliseconds, and it took 10 minutes, but when I change to 0 milliseconds, or lets say 1000 ms for 1 second, it still takes 1 min and 20 seconds.
On my laptop I can change the value StartupDelayInMSec however I want and it will work, but I cannot have it low on my desktop and make it launch all startup items below 1 min and 20 sec.
So, yahoo web mail's giving me grief on both this Windows 8 machine and my vista machine, which I'd done a fresh zero out and software reload on, neither machine will load yahoo messages, keeps spitting up error code 45s...
I saw they had a yahoo for windows 8 app available, lets try that! no such luck, yahoo mail Windows 8 app is doing the EXACT same thing.. sans the error code 45s.. Getting grief from their yahoo email?
The snapshot below is what it HAD been tossing up nonstop before the error 45s started saying hi.. as you can see..I had alot of mail tabs open on the mail screen..they were all spitting up errors.
I dual boot Windows 8.1 and linux, and I was wondering how to boot into the windows BIOS. I would like to enable virtualization so that I can run 64 bit virtual machines, but it does not give me the option to boot into the BIOS. No pressing Esc, delete, F11, or F12 boots me into the BIOS. I was not able to boot into the BIOS even before dual booting.
Have a sony viao laptop with Intel(R) Core(TM) i7-3632QM.
I am using Windows 8. Often a web page will not fully load and I have use "refresh" one or more times to get it to load. Is there something I am doing wrong or a setting I can change?
View 8 Replies View RelatedI have a dual boot system with Win 7 and a Win 8.1 and all works well. I am using two SSD's with Win 8 and the other with Win 7. Asus Maximus v Gene, i5 3570k and 16 gb ram.
When I boot into Win 7 with an additional internal hdd plugged into a mob SATA port all is ok. However, when I attempt to boot into Win 8 I only get to the moving circle and won 't go any further. If I unplug the hdd the computer boots fine into Win 8.1.
The hdd is set to active and shows up ok in Disk Manager (Win 7).
I know that Windows Fax and Scan is not an ideal solution for scanning, but I'd like to avoid installing additional third party software, if possible.
WF&S works fine with my (Canon) scanner. It scans without a hitch. However, it is only able to use the default scan profile. If I try to create my own scan profile, I get this message:
"Windows can't load your scan profile. Your profile settings might not be compatible with this scanner."
I know that my intended profile settings (600 dpi, scan to PDF) are compatible with my scanner. How can I get WF&S to create a profile with my settings?
I have a 2 month old Dell Inspiron 660 running Windows 8.1.that came with windows 8 installed but I upgraded to 8.1 off the internet. Everything worked okay until I did a scan and cleaning with ccleaner. Pretty soon startup was very slow going from the Dell screen to the lock screen to the password screen to the windows welcome screen but windows would eventually load. Now the startup only goes to the welcome screen. That little circle of dots starts spinning and keeps on spinning but Windows never loads. Did I erase some registry files when I cleaned it?
I also wanted to know how load Dos from win 8.1 and how to boot win 8.1 in safe mode.
I am trying to install a oem copy of windows 8 64 bit onto my desktop, using a microsoft install dvd. I've installed xp, vista, and windows 7 onto it without any issues whatsoever, however when trying to install windows 8, I keep getting an error in windows setup that states the following:
Load Driver : A media driver your computer needs is missing. This could be a DVD, USP or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Since I'm using an actual microsoft disc, and the hash checks out okay, I'm not really sure how to proceed, as it doesn't seem to be the disc image.
The solutions I've come across are vague, and usually relate to USB/VMware installs instead of using a retail DVD. How I can get past this error?
My system:
EVGA Z77 FTW Mobo, updated firmware/bios
Intel 3770k CPU
Antec Quattro 1000 PSU
Kingston HyperX 3K SSD
EVGA GTX 580 3GB GPU
LG M-Disc Super Multi DVD/CD Reader/Burner
I have Windows 8.1 - Google Chrome will not load pages at all.I bought this computer brand new about 1 month ago. Google chrome browser was working great until the day before yesterday - all of a sudden, will no longer load pages.- am overwhelmed with all of the posts about 8.1 issues.
View 9 Replies View RelatedWhen I start my computer (which is running win 8), yahoo messenger won't sign in, and certain websites won't load for me for about 10-15 minutes. So it's just for certain websites, and the yahoo messenger client. Skype and 90% of the websites load with no problems whatsoever. And it only happens after i turn on my machine, or after a restart.
The problem persists no matter what browsers i use. When i ping those websites, I get replies from them, everything looks just fine, but they just won't load. After 10-15 minutes, they just fire up, all at once and i get no problems whatsoever. It's not a problem with the internet connection, as I got another windows running machine, an iPad, and my gf's Mac, and none of them are experiencing this issue. Plus, it also happens when i'm using any other network from a different location.
I have flushed my dns, and have run antivirus solutions like dr. web, combofix and malwarebyes anti-malware, and still no joy. My windows updates are up to date.. Do you need any other info for a diagnostic?
I have windows 8 on my acer laptop, and I'm having issues with opening websites. All of my browsers are acting the same, there are some websites that load up completely blank, It is so frustrating, I can't do anything. I can't even load up my Router IP Address configurations. Why it suddenly started happening.
View 1 Replies View Related