I am running Windows 8 which came pre installed with my hp notebook, but all I see in system properties is "Windows 8" and I typed "winver" into run and all I see is "Windows 8" and nothing about an edition
I need to know this because I am getting an SSD and will need to make a Windows DVD so I can do a clean install onto it.
I have a problem here. Windows edition does not appear on system page. How can i fix this problem? I already tried "sfc /scannow".
+ I changed these old ones with the original ones: basebrd.dll.mui and shell32.dll.mui + "mcbuilder" on cmd via administrator privileges + than i installed KB2902864 update + restart + BINGO!
I've got windows 8 and I think it's the home edition. now, will this thing burn DVDs on it? I know I can record CDs with it, but I can't find information about burning DVDs, even in this windows 8 for dummies book.
I have to run a few programs only available on linux.
As seen on almost all the sources I visited, I installed VirtualBox and downloaded the last Ubuntu "iso" file. after having installed the new OS on virtualbox, I tried launching it and got the very often found "VT-x is disabled in the BIOS" error.
The solution also given in all the sources I visited is "enable Hyper-V" in the "windows features turn on or off" menu. Problem is : I can't find this option (I even looked in the least probable sub directories, just in case)
I found out this feature was only available for "Pro" versions of windows 8/8.1.
My question is : Is it feasible for me to run a virtual machine, or even run a machine on dual boot on my default-installed-windows 8 machine? I don't have the money to buy the pro package (which, for some reason, is MUCH more expensive than the "previous windows to 8.1 pro" update).
My hardware is more than sufficient: 64bits i7-4700HQ processor, 8Gb RAM DDR3l
I've got a problem with Windows 8.1 Single Language Edition 64-bit (English/Russian/Ukrainian).
When Windows 8 updated to 8.1 last year through the Store, I lost the ability to Restore and Refresh (a feature I had used several times previously).
Since then I have been using the same installation of 8.1, and it has finally become too laggy and bloated and I need desperately to Restore (files are all backed up and removed from computer, ready for Restore).
Things I have tried already:
- Found my Product Key using a keyfind program. My version of 8.1 came preintalled on the laptop, no DVD case, or e-mails with Key. - Made a recovery USB Flash Drive (my laptop doesn't have a DVD drive). Recovery drive works when I boot from BIOS, but says it is invalid when I try to Restore. - Tried to download an official ISO file from Microsoft, but the site says my Product Key is invalid (its not invalid). - Tried using the Enterprise Trial ISO to Restore, and am now stuck with an expired trial copy of Enterprise.
I still have the Recovery Partition, and didn't delete it when I made the Recovery USB.
My computer is an ASUS Zenbook prime UX31A. All I want is to Restore. Even if its back to Win 8. I do not understand why all options seem to be broken since the update to 8.1. It seems intentional.
I want to Restore legitimately, and use the product I bought legitimately. But if this continues I may have to seek "alternatives".
I tried the guide for activation backup but on reinstall the WMC is missing, so the restore of the activation status fails. Even it seems impossible to integrate the Media Center into the upgrade due to the encrypted install.esd file.
A fresh install via retail iso also failed with the "core" message (wrong version?) giving a slui code afterwards. How to manage to keep the activation intact using the Windows 8 Pro Upgrade?
I have dell 14r special edition with win8. i'm trying to partition the drive and create extended partition. however the factory image is stored at the end of drive and all of the drive is considered as primary drive. i've two options
1. Delete or move the partition. if i do that will the recovery work. 2. Burn the factory image and delete the partition. but your backup software is not working for me to backup the image.
It has been months and still my music player lacks all the cool features. Is there a way to convert my Music player or even my N edition to a normal edition for the fancy Music player.
I don't get artist pictures in the background whilst in the player and nor does the tile show the artist picture.
Since only Pro & Enterprise have the secpol.msc snapin I have been looking for a way to turn off running administrators in approval mode on Windows 8 Core edition.
This is so Windows works like it did with Vista & 7 (ie. Elevation with zero restrictions.)
I have just installed aida64 extreme edition on Windows 8.1 and when I click on the update frequency page for the OSD icons this is not working it should be displayed in seconds. I've removed and reinstalled but its still the same.
So there was an update for windows 8 and after that it stopped opening the grub menus and it automatically goes to windows. I know it can recognize the drive with Linux on it because it shows it to me in file manager. Prior to that I unplugged and rep lugged the led plugs but I don't think that was the cause. So how do I show the grub menu?
I am trying to get embedded album art to show in W.Explorer for m4a Mpeg4 files. I am not talking about the art on the folder but the art in the files itself. Mp3 shows up no problem but m4a is being difficult.
Any easy solution aside from using a shell extension.
The only possible solution I found in another thread and will post it here: "I fixed the problem as it was mainly due to corrupted registry for some strange reason.i imported the .mp3 dile extension key from registry and opened it using notepad and replaced all .mp3 extension with .m4a and saved it as .m4a.reg and run it and had to do a system restart after that thumbnails again started showing up in windows explorer as normal.such as in the below screenshot"
My question: I don't have a corrupted registry as I just did a fresh install only a week ago. So, is it possible for me to edit the registry as this person suggests? how would I go about doing so exactly? I have no experience messing with registry files .
I'm using windows 8.1 and for some reason add/remove programs is only displaying about 18 programs. This is a new laptop, and it wasn't doing this a few days ago. I've downloaded a couple other uninstallers (IObit Uninstaller and Decrapifier), but they both display the same thing.
I recently converted to Windows 8(.1) from 7. When I had seven I'd play games in windowed (borderless) mode and tab out to my other monitor. It left behind a taskbar at the bottom overlaying the game I was previously on. I found this actually kinda useful. Now in Windows 8 it only shows if I tab to a program on the same monitor as the game, and not if I tab to a program on my other monitor. Is there any way to change this?
I am running windows 8.1. I just turned on my computer and got the following screen. It wont recognize keyboard input as normal characters nor will it allow me to connect to the internet. It was perfectly on 3 hrs ago before I turned it off then back on again.
The link below shows you what my current windows 8.1 screen looks like.
I upgraded my new refurbished Dell 15 7000 from Windows 8 to Windows 8.1. Now, my hidden recovery drives are showing on "My Computer". On Windows 8, they were hidden so the user, or softwares, can't access the partitioned recovery drives.
After upgrading to windows 8.1, they are all visible on "My Computer" and files are be written on them. How can I hide these drives? I am afraid of doing Windows Update or installing Office 365 since they extract the files on a different drive and move them back to C drive.
Dell 15 7000 specs Windows 8.1 upgraded from Windows 8 Intel i7 4500u Nvidia 750m GDDR5 2GB 8GB memory 1TB Western Digital HDD 4 USB 3.0 ports
installed a new ssd with a fresh copy win 8 on my mb sabertooth fx990 r2.0 but for some reason it showing up under safely remove hardware and eject media ..
I have an Acer Aspire 5750G-2414G64MNKK and after the installation of Windows 8 I have a problem with the battery. In fact, when I turn on the PC, the battery indicator is not showing... I have to refresh devices in Device Manager. It happens randomly and it's very annoying. I have also tried to search an updated driver of the battery but windows update says that it is updated.
I have an interesting issue in the windows 8 metro menu. When I right click an icon you normaly get a properties bar pop up on the bottom where you can change tile size, pin to start etc. This bar is no longer appearing.
Windows 8 is showing a black screen before logon and not the logon picture..........................................and it also takes a lot of time to load.
I have recently installed Windows 8 Enterprise RTM x86 on FSC V3505 laptop and so far the OS has been working for a month. However, Recently I tried to access "Control panel -> Indexing options -> Advanced -> File types" which caused the Indexing options windows to close. Similarly, trying to access "Control panel -> Default Programs - > Associate a file type or protocol with a program" causes windows explorer to crash. The Event Viewer reports are shown below. Both options I am trying to access are supposed to show a list of file extensions. I am trying to figure out what is the reason for this behavior and possible to correct the issue without reinstalling windows from scratch. System restore is not a good option since there are only two restore points corresponding to recent time points.
Attempting to access : Control panel -> Indexing options -> Advanced -> File types causes the following error in Event Viewer :
Faulting application name: DllHost.exe, version: 6.2.9200.16384, time stamp: 0x5010888a Faulting module name: combase.dll, version: 6.2.9200.16420, time stamp: 0x505a976e Exception code: 0xc0000005 Fault offset: 0x00027579 Faulting process id: 0xc58
How it is possible that my windows 8 is showing my webpage differently than windows 8 Iexplorer ? Windows 8 scaling my website differently compared to windows xp.
Recently upgraded to Windows 8.1 on three PC's on home network but now I'm having a problem on my ASUS VivoTab Smart Tablet.
My main login screen has been setup to show three (3) users but shortly after upgrading, it started showing a fourth user. The user name for this fourth user is "zqtjerxnjfcz". When I clicked on it, it started the customizing process for a new user. As soon as I could I signed out and logged in under my own account and then deleted this new unwanted account but it keeps returning, usually after a restart or signing out and back in.
my hp laptop is running 8 pro right now and i cannot find the 8.1 update in store even though all the updates are installed... i have included a screenshot of store.