From the start I had issues updating to 8.1, all the normal issues people have faced. It finally decided to work and all was well. It was stable and I created a system recovery point and all was working well. Then I let it install the new update for nvidia graphics card and also another windows one. Then restarted and then went through the normal pre-boot procedure however instead of loading the normal login screen in windows 8 all I get is a black screen that flashes a dark grey close and see the network icon in the bottom right and EN bottom left the back to black in a constant loop. I've tried booting to safe mode and it doesn't work. I've tried using system restore and that doesn't work as it says an antivirus or something is preventing access to a file. I've tried using sfc/scannow three times and every time I can't get it to restart properly even to get into the recovery options. I don't have any other recovery media and Microsoft sent the windows 8 CD and it never arrived (lost by postage company). I've tried to use Dism aswell and that gives me error 87?
I have had to system restore 3 or 4 times in the last week or so as Windows 8 refuses to boot after installing the latest updates discovered from the last couple of weeks (though some are from December 2012)
I have unchecked all the current updates and have decided against installing them as they seem to be preventing Windows from booting.
Pattern - "Restart to install updates"
Restart locks on the start screen - Restart again and locks again (repeat this process 3x)
"Windows is automatically repairing..." - Fails
"Windows must restore settings to a previous time..." - Usually succeeds, sometimes fails.
Then I can get back into Windows.
As soon as I install these updates, I won't get back into Windows until I system restore since before the updates and my build won't remain stable unless I prevent Windows from installing these updates.What could be going on?
They are quite big updates (totalling ~740mb and have all been discovered in the last week or so though some date back to late last year)
About couple hours ago I decided to install updates on my Windows 8 desktop. I had about 12 or so. Can't remember which ones now. My update settings are to notify me of the updates but not to install them. So I manually clicked, yes, install. Then after a little while the updates window showed up in red telling me that some updates did not install. So I decided to reboot the desktop to clear it up...
The desktop now hangs up on this very screen: (New windows logo and a spinning thing)
That spinning thing keeps spinning, no matter how long I let it run like this. The HDD light first blinks but then about half a minute in, it stops doing so. I believe that the fan inside spins audibly louder too.
OK, so if I reboot by holding down the power button for a few seconds, it begins rebooting again. For the second time it showed something like "Automatic repair" or something. (I need to say that my solid state drives have Bit locker set up on them.) So after entering the bit locker keys I was presented with an option to do repairs. Since I didn't feel like I needed to do system restore I declined and chose to keep booting into Windows.... again nothing.
So I repeated the process above, but this time it did not offer me to do system restore and instead, it showed something in the tune of "Repair windows". So I chose it, and it then showed this window:
Now I tried it two times already, and no matter what I choose, it hangs up just like I showed on the screenshot above -- with that white border around whatever I choose... How do I get my desktop back?
I have a Pavillion DM3 that I have updated to Windows 8 Pro. I have left the Win7 Home on as well and have a dual boot that I was going to keep until I was happy with Windows 8.
Windows 8 installed OK on a new partition and ran very well. I loaded some other software like Office and Acrobat, and it still started and ran very well. I then let it apply the Windows and Office updates (about 70 items). It then took about 10mins to boot. Thinking I had corrupted something, I tried the auto repair, but that didn't work, so I tried refresh and rebuilt the Win 8.
I reinstall all the items I had installed previously, and applied the updates again, but exactly the same problem - very slow to boot. I have now reverted to Win7 again, and it is all working fine again. I have left the HP System partition unchanged, and as the active drive. I did try various boot rebuilds but that didn't work either.
There must be something in the updates that causes this but I don't know how to find out what.
I own an Asus laptop with pre-installed Windows 8.1 and, after downloading & installing recent Windows updates (20th of September 2014, if memory serves me correctly), I am unable to access desktop because system freezes at boot sequence returning me this error: "Secure Boot Violation. Invalid signature detected. Check Secure Boot Policy in Setup" printed inside a small red box.
After googling around, someone suggested to disable "Secure Boot" from BIOS and enable "Launch CSM". I performed such operations but I got no results (BIOS menu automatically appears after every reboot). Someone else suggested to change boot sequence and start system from a Recovery CD but I got no CD supplied with my laptop as Asus stopped providing CDs from very long time AFAIK.
I am quite sure problem relies on Windows Updates because I used this Laptop very little times and no p2p or hacked programs are installed. In addition to that, as far as I read, it seems other Win users experienced the same issue after installing WinUpdates but they have different BIOS so is not easy for me to understand my BIOS accordingly to what they do in their own BIOS in order to solve issue.
What annoys me most is that I bought this Laptop in July 2014 and, just three months later, it got freezes because of official Windows Updates and not because of bad behaviour of user.
This brand new HP Pavilion Laptop had a UEFI Boot entry in the BIOS.
I used the HP Support Assistant to update the HP functions and programs, and it downloaded a new UEFI diagnostic which it installed as a partition on the drive - It was already there to begin with, but the new version removed the entry "UEFI Boot" from the Bios Boot Selections and now it just says "OS Boot Manager"
Therefore, when I try to use "Advanced Start" options from PC Settings, I no longer get the options to go into Safe Mode or the other recovery options, the system just reboots and F8 does absolutely nothing.
Other than setting my BCD to Legacy Mode, I cant get this into Safe Mode.
I burned the recovery disks which were 6 DVDs, will that put the original OS back in? I do have the free 8.1 update available, maybe the new UEFI only works for 8,1? I'm just trying to figure out how to put the UEFI Boot option back in, the original UEFI tool cannot be downloaded from HP.
I've downloaded a legal iso from MAPS, i ve slisptremed all latest updates into it with Windows download integrator (it uses dism afaik) , then the problems comes in - i cannot use USB as my install.wim is 4,8 GB. I ve burned a Dual layer DVD with Windows 8 stock recorder and the PC doesnt see the DVD drive as bootable. When using stock it boots uefi from pendrive without any problems. How to make this updated iso boot into UEFI mode ?
I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.
"Failure configuring windows updates. reverting changes. do not turn off your computer ".
I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?
Model number : Asus 15634 Laptop Intel Core i3 .
I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.
After a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.
Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.
I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.
I just reinstalled 8 on a ssd and tried to install 8.1 from the store but it says i need to update windows first. I tried running windows update but i get an error saying "Windows could not search for new updates" error code 80240440. I tried everything I could find online and nothing seems to work. I tried restarting windows update, i tried turning off firewall, I tried reinstalling windows again and selecting "check for updates online" before installing from the cd, i tried running a check disk, and there is absolutely no program installed on the drive other than windows.
I was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
I am currently having an issue on my laptop at the moment where it's stuck in an infinite loop of 'reverting changes' after having tried to update and failed at 30%, I have done some reading at ways to boot into safe mode however it would appear windows 8 doesn't give me the chance.
I do not have a copy of my original windows 8 disc and am at a loss!
I have tried spamming F4, F8, F10 buttons and none are allowing me to enter boot mode.
After I installed Windows 8 I started having the "0 KB Total, 0% Downloaded" issue while attempting to update, sometimes it does work, but most of the time it doesn't
So some background. I had issues with being able to install ANYTHING from an MSI file. Then I wasn't able to install any updates from Windows Update. I then reinstalled Windows, and am now facing the same issue after a few days. I would rather not reinstall yet again.
I tried doing System Restore, but it just hangs. Windows Installer hangs on "preparing to install".
I just bought new Asus Vivotab Smart Windows 8 tablet, after the very first windows update it failed to install some of the updates, and then after the reboot I am now stuck with the message "Failure configuring Windows updates, reverting changes".
It never gets any further than this, it never reverts, I have left it running for an entire day and have restarted several times.
This is a tablet, so there is no keyboard so I cannot press any F keys to get into recovery mode, and no CD to boot from etc.
I don't see any option to hide the updates which you don't want to install. In windows 7, one can simply right click and choose hide the update, but no such thing in windows 8.1.
On Win 8 (not 8.1) will be first -time user soon - How do i do the updates for Win 8 once new computer is set up and 'running' ? Because it's been sitting on a store shelf i'm sure there are Win. updates required ..not familiar how to find 'that' section inorder to do the updates ! Guess i want to do that before signing onto internet - right ? this will be a whole new world to me - been using XP for eons
PS any other 'hints' as a newby to '8' even if i haven't thought to ask ! PPS: do you recomment i just set options to ''automatic' updates? with XP i know how to find Control Panel to set that but how do i find Control Panel (if that's where i do it ) on Win 8 ... boy am i 'green' !
Today I installed Windows 8.1 on my notebook. I have 60GB SSD on my notebook so basicly just for windows and some programs (no movies etc. that's all saved on external hard drive). However, when I installed windows, it took wery little space. I still had 44GB free. After updates and installing MS Office, I now have only 22GB free. So I'm wondering, how can some updates and MS office take 22GB of disk space? Is here anything I can do, to get more space on my computer?
I have just upgraded to Windows 8.0, I have been trying to complete the updates that I have just done and each time I restart to complete them, it crashes on 30%.
I recently built my own computer, and have been using it problem free for a while up to now. I realised the lack of computer restarts for updates, and I noticed that I have updates that need to be download. When I tried to download the updates, The progress seemed to stop. Thinking this was normal, I left the download to be. When I came back to it, It said that windows could not install the updates. want to try windows 8.1
My laptop started installing updates when I powered down for four hours I have had this message on the screen - keep your PC plugged in until this is done. Installing update 17 of 24.....
How long do I leave this or can I power off and try and restart?
So I restored my system because I had no other choice from it not booting before and it was working for a day, then when I restarted it said 'installing XX / 93 updates' so I let that run, and when It finally finished, it restarted said 'configuring windows updates XX% complete...' and then it suddenly said "Failed to configure updates. Reverting Changes." and then it looped this by restarting, trying to configure them, and then saying "Failed to configure updates. Reverting Changes." again...
I've got back into safe mode, what should I do to make it update properly again?
Someone suggested toggling "Secure Boot" in the BIOS, is that worth a try?
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
When I run Check for Updates it just hangs. It says it is checking for updates and green progress bar is repeatedly running across, but nothing happens.
Before this problem arose I had just run disk clean-up including remove installation files and windows updates. The disk clean-up process removed about 59 GB including a large Windows.old folder.
I upgraded to Windows 8 from XP about 10 days ago. Windows update was working fine until the disk clean-up. I ran Check for Updates frequently after the upgrade to make sure I got all the updates, it worked perfectly well for both update and install.
I have tried Checking for Updates several times since running disk clean-up.
First time I ran it I had this error message: Windows Update error 0x8024a000 (only seen that one time)
I ran the Update Troubleshooter after that and it found/fixed the following:
Potential windows update database error detected 0x80070490 -Fixed Windows update components must be fixed - fixed
The troubleshooter did not resolve the issue. I have run Check for Updates many times since with no more error messages, but it just hangs. When I run the Update troubleshhooter it fixes the same two issues as above.
Since the disk clean, Windows Update shows:
Most recent check for updates - Never Updates were installed - Never.
As my Windows Updates were previously all succesfully installed, the history must have been cleared.
No error messages have been seen since that first one which has not repeated.
When I was having problems with KB2975719, and going thru solutions, it drove me nuts trying to find if I had certain updates installed from the Installed List in Windows 8.1 since they are not in numerical order. (Contol Panel >Uninstall A Program > View Installed Updates)
I finally figured out where to find a numerical list which I could check much easier in determining if the updates required in some solutions were installed on my pc.
1. Install Belarc Advisor
2. Run and open Belarc Advisor
3. At the bottom of the opening page of BA, click on "click here to see all installed hotfixes" - a numeric order list.
4. Just to be sure all were there, I printed this list and manually compared it to my Control Panel Installed Updates one time.
I then had a numerical list to compare to all the KB's required for installation of KB2975719. Much easier for this simple brain than remembering a number and looking for it jumbled list.
I am trying to get things going with my Dell Venue 8 Pro, and I go through the initial setup fine. However, when I do Windows Update the network fails to connect after the following reboot.
When I look at the device/driver, it says it is working, but when I do a network troubleshooting it claims it must be a bad driver.
The driver doesn't seem to have been updated, based on the fact that the button to roll back is grayed out.
When I do a restore of my system, it works again until I do the Windows Update.
I have done this a couple of times, once with all updates, including the optional updates, and once downloading only the critical and important updates.
Other than doing each update individually, is there a reasonable way to figure out what is causing my issue?
Is it normal for Windows 8.1 to show "Applying Updates" after a BSOD crash? I saw this happen on my desktop earlier this week and now on my laptop. I checked the update log and there was no update applied immediately after the crash.
