Per this article below, I used the advanced startup menu in Win 8.1 to disable signed driver checking.Windows 8 and Intel USB 3.0 Host Controllers | Plugable
After I installed some unsigned Intel Usb 3.0 drivers, every time I shutdown and restart the machine from the old (Win 7) desktop, or the Metro UI, the machine now ALWAYS reboots/restarts with the Advanced startup menu.
I've got LATITUDE E7440 laptop with Win 8 Pro preinstalled. I need to disable driver signature enforcement in advanced options. I've read about how to do it in many places, but basically.. when I go to Troubleshoot -> Advanced options -> Startup Settings
And I push restart, menu for type of booting (below) doesn't appear. It just restarts as usual. Can I get to this menu in another way or why it doesn't appear?
I've got 4 laptops and this menu appeared only on one of them after restart. I've even reset it to its factory settings, but it didn't work out for me.
Usually, Windows 8.1 advanced startup options -> troubleshoot menu should be .....
But my troubleshoot->advanced options only have UEFI Firmware and Startup Settings ....
I have to use command prompt ....
I've had two computers in the last few weeks where i was unable to get to the Advanced Startup functions through Settings>Change PC Settings. On one machine, clicking Change PC Settings just kept giving a blank white screen. The other PC simply would not boot. (On one of those PC's I wanted to get to Safe Mode, on the other I was looking to Refresh or Reset the OS.)
I fixed both of them by restoring to factory original settings using the manufacturer's built in function, which was ok since there was not much configuration that had been done by the user.
But I am wondering if Microsoft has built in any other ways to access Safe Mode or Refresh/Reset when the usual method does not work. Can these be accessed through the recovery boot disk? If so, are there any tutorials on this?
My Dell Latitude 10 tablet runs Windows 8. I have created a standard user account and want to forbid the user from accessing the "advanced startup options", which he might use to go to safe mode and reset my tablet. How can I do it?
View 9 Replies View RelatedMy Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.
This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".
Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't worked (it actually caused the issue). Running Windows 8 on Dell Inspiron 3520.
I'm guessing full format needed? - Would a format resolve the issue, since a 'refresh' caused it?
I have three options in the Advanced Startup - Use a device menu that I believe are from the previous owner of this Surface Pro. I have ubuntu, linuxmint, and BestCrypt Volume Encryption. How can I remove those options since they do not apply to anything on this device?
I looked in msconfig and nothing but the normal Windows 8 is listed under the boot tab. Also only have the Windows 8 install listed when I run bcdedit.
I have a multiboot scenario set up on my laptop, and I'm using the Windows 8 Graphical Bootloader to manage my other operating systems. I need to install two programs, GBridge, and Synaptics Touchpad Installer, and both use unsigned drivers. It seems Windows 8 doesn't ask for confirmation to install unsigned drivers like previous versions of Windows, it just outright denies them without user consent.
As a solution, I figured I would go to advanced startup options and disable driver signature enforcement like I did *successfully* for my Windows 8 desktop, but after it reboots to enter advanced startup mode, it just goes straight into Windows! No matter how many times I tell it to enter advanced startup mode, it refuses to do it. I even tried removing all my multiboot options and it still goes straight into Windows without asking me what I want to do.
For the record, I've tried it these ways:
Charms Menu -> Settings -> Change PC Settings -> General -> (Advanced Startup Options) -> Reboot Now -> Troubleshoot -> Advanced Options -> Startup Settings -> Restart (What a pain in the ass to have to navigate all this crap btw)
Choose an OS -> Other Options -> Advanced Startup Options
From legacy boot menu -> F8 -> Advanced Startup Options
All these attempts and methods achieve the same result: a normal reboot without giving the options of what advanced startup I want.
I have a Microsoft Sidewinder X4 USB keyboard. When I restart Windows 8 using Advanced Startup Mode I get the familiar menu where you have to enter F1-F9 to select an option (or F10 for more options). My keyboard doesn't work, however. I tried pressing all of the F-keys but none of them are recognized.
I am pretty sure it's not a BIOS issue because whenever I do a cold boot I can get into the BIOS by pressing the DEL key so I know the keyboard is recognized by my system. why I can't use my keyboard in Windows 8 Advanced Startup?
The Troubleshoot icon that should be under the 'Advanced Startup' Option is missing. System is a new Dell Latitude 10 ST2 Tablet running Windows 8. Have access to 9 other identical tablets, all configured the same and they all have the Troubleshoot Option. Have tried multiple methods of getting to "Advanced Startup" display (including Safe mode, 'shutdown /r /o', etc.), but all result in only having the 'Continue', 'Use a Device', and 'Turn Off your PC' options - No Troubleshoot. Other than missing this icon, system is working fine. Shy of wiping the disk and starting over.
View 4 Replies View RelatedI have been using Windows 7 Pro (64) for several years, and today installed a newly purchased Windows 8 Pro (64) OS. I looked on-line and found many articles on how to multi-boot back to Windows 7 after installing Windows 8, and believe I have done this correctly (more below), but when booting up I do not ever see a multi-boot menu, my system boots directly into Windows 8.
When installing Win 8, I booted from my CD/DVD drive with the Win 8 OS media in the drive. (I had previously reduced the volume of my Windows 7 drive and created a new partition that I called "Windows8". ). At the appropriate time in the Win 8 install I chose "Custom", then chose the newly created "Windows 8" partition, then proceeded with the Win 8 OS install. As mentioned above, I do not see the multi-boot menu when booting up, however when in Windows 8 I can see the Windows 7 drive in "Computer", so it was not over-written.
Startup Options - Choose a Default OS to Run at Startup in Windows 8
and am wondering if I should try Options 2 through 4 (1 of)? I build my own PCs so know something about PC's, bt not much about booting to an OS.....
Another options might be installing a third party boot manager, which I have not yet done.
my reason for getting back to Win 7 is to be able to use the PC while I learn and setup Win 8 over time. I went into this believing that getting a multi-boot capability would be very easy.
i'm using a Gateway Windows 8 64 Bit.
I know how to access the boot menu using the advanced troubleshooting option inside the computer. But, what if Windows 8 becomes unbootable and I cannot log into the machine? There is no boot menu option like Windows 7.
I have heard if Windows will not boot, it will display the advanced options automatically. Is this true?
Also, if I power down my system while it is booting up will I be able to access the boot menu on next startup?
Do I need to enable the AMD driver Catalyst on the startup menu and have it running in the background of my machine? IF not necessary, does it benefit in anyway if the software is running?
View 5 Replies View Relatedthis error shows about 5 times when i launch Cinema 4D, and when i try to open the materials menu it won't show up like other menus do
View 1 Replies View RelatedI have an HP Envy dv7 laptop running windows 8.1 I forgot my windows password so I made a 3rd party password reset disk. I changed the bios to legacy and disabled secure boot. The disk wouldn't load so I set the bios back to the original settings. Now I hear the chime that windows has loaded but there is a black screen.
View 3 Replies View RelatedI Upgraded Windows 7 Home Premium 64 to Windows 8 Pro. Windows 8 now boots to the "Start Page" then a couple seconds later goes to the Desktop. This isn't something I configured it just does it. I do have Start8 from Stardock installed but it isn't configured to go to the desktop on boot either.
How I can stop this behavior and have Windows 8 stay at the Start Page on Boot?
After upgrading to Windows 8.1, I started experiencing a weird boot issue. When I boot Windows I only get a black, empty screen. As soon as the BIOS splash disappears the computer stops booting. No disk activity, nothing. My first instinct was to run bootrec /fixmbr and bootrec /fixboot from the Windows 8 install/recovery DVD. This temporarily solves my issue, but the problem returns on next boot.
I already had this issue before the 8.1 update, but it only occurred sporadically. I would usually work around this issue by rebooting.
I have windows 8, and the mouse pointer doesnt move after the windows boots up.. But it works after i disconnect it and replug it..
View 2 Replies View RelatedThis is rather ironic. Most people complain about booting to the new Start page and want to boot the the Desktop. I would rather boot the new Start page but my new Asus Windows 8 computer boots to the start page initially but after about three seconds automatically goes to the desktop.
View 9 Replies View RelatedRunning Windows 8, the system boots into a user account without login.
The launcher seems to work, I can bring up the desktop. From the desktop I cannot launch any programs, other than a non-admin DOS window- but from there I can't launch any other non command.com EXE.
When I try and run any desktop app, the icon comes up and highlights for about 5-10 seconds, then goes back to normal. I can't even ht CTRL-ALT-DEL and run Task Manager. It just never comes up.
Logging out never gets me back to the login screen.
I can swap accounts- but the other account never gets logged in. Just waits forever (or, at least, a long time).
When I launch Metro apps, the splash comes up to the app... and that's it. I can CTRL-F4 it, and that's it.
Hitting F8 on boot doesn't do anything (no safe mode anymore?).
The Last couple weeks after I finshed reinstalling a fresh copy of windows 8.1 after my computer has been shut down for a couple of hours when I turn on I receive most of the time random BSOD ranging from bad memory management, page file in no fault, and so forth. But when I restart after the bsod the computer runs fine. Once in a blue moon it takes maybe 2 restarts to finally boot it correctly. I have rain Driver verifer and I uninstalled ai suite 2 when their drivers kept crashing it.
I had also ran windows mem diag during a cold boot period and it showed no errors. I have also tried returning to stock clocks and still running in to the same issue after a bit of time.
I am currently running:
Windows 8.1pro
i7 3770k over clock to 4.6 on an Asus Sabertooth z77
G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) X2
OCZ vertex 4 128 ssd
1tb WD black hd
2tb Seagate barracuda hd
Crossfiring 2 Sapphire Toxic r280x
PSU is a corsair AX 1200i
Attach below is the zip from the SFdiagnostics tool program from grab all.
I am trying to install windows 8.1 on my old windows xp laptop using a bootable USB from the universal USB installer, and when i press f10 on my laptop, and tell it to boot from my USB, it pulls up a black screen with a blinking line(like a terminal). i tried pressing a bunch of keys, and the only one that i got a response from was the enter key, which made a beeping noise.should i use a different program to put the ISO on my USB?
I'm going to try a program that i used a long time ago when the UUI wasn't working called Rufus. I'll let you all know if it works. Also I'll set it to NTFS instead of fat32 and see if that works.
Windows 8 boots up pretty quickly, but it takes a notably long time (compare to Windows 7) for it to show up the system tray applications. In Windows 7 it is almost instant.
Is this Microsoft's problem or the app maker's problem?
Also, the apps seem to load sequentially. Is there a way to rearrange them so that the ones I want load quickly. I need AutoHotKey, Logitech Setpoint and Logitech Gaming Software to load up ASAP. Rest can take their sweet time.
Also this is what the TaskManager's startup performance analysis looks like.
Having this *feature* means that Microsoft can blame the app maker for the slow startup. But why doesn't that happen in Windows 7? Is this because Desktop is another app, and stuff don't really get priority?
Also I still cannot find why PeerBlock would not start when placed in the classic Startup folder.
Ok, so I made a local account, because I don't give a rat's about all that Sync stuff. I found out how (from these forums) to make it automatically log you into an account. However it keeps trying to log into an "Other Account", I don't have another account, that's just what it says. Then it of course says incorrect Username or Password, because there isn't one, so I have to click sign into a different account, and then click my normal account, defeating the whole purpose of having it automatically sign in,
View 6 Replies View RelatedI have Windows 8 Pro 64 bit. My computer was running fine until about 1 hour ago; now there is more lag. Substantial slowness when it boots up, small lag between my typing and what's seen on screen, lag opening and closing programs, etc. I can no longer use Dragon NatuallySpeaking because the computer is too slow.
This is not due to bloatware or too many apps--It happened suddenly (computer started slowing down right away). I have not installed any new programs. I have tried both shutting down and restarting my computer.
How do I get rid of the start and log in screens when 8.1 boots? I would like to go straight to my desktop.
Also, can I get rid of the Windows start button and use Classic Shell instead?
I just updated to windows 8.1 yesterday all is good, today I receive a update for Advanced Micro Devices graphics adaptor WWDM1.2 AMD Radeon HD 75209. It failed came back as error 80070103 says trying to install a driver that's already installed or a driver of less compatible . So I looked in add and remove I do see a advanced micro device but I don't know if it's the same or better how do I find out. I also googled it and read that it's never advised to update drivers threw windows update, go directly to the makers web site so how did this happen and what should I do?
View 3 Replies View RelatedDuring the boot of Windows 8.1 Update, how do I go directly to the screen of the advanced settings of the boot?
In this phase, how can I go in safe mode?
I've recently purchased a new laptop with Windows 8.1 pre-installed. First question is how do i enable a confirm window to pop up when deleting something? I don't like how i can just hit delete and it moves it (Only to the recycle bin, but i'd rather it didn't).
Secondly how do i stop the start menu from switching to that Windows 8 menu view? I did originally change it so that when you click the start menu (Bottom left in) it would actually bring up the start menu, but it seems to have reverted. On top of this how do i change it so that pressing the Windows button brings up the start menu rather than the Windows 8 menu view thing?
Thirdly how do i enable file details when in Windows Explorer. So in Windows 7 when you select a file it would give the size, name, author, date last edited etc in the details pane. How do i get that now?
Finally, how do i change my task bars transparency?
When you launch skype from the startmenu it is a huge square, when i launch task manager from the startmenu it is launched to the desktop.
Could there be a way to make the task menu launch from the startmenu to be a big square like skype is "phone eddition"
This would be useful because when im in games and the game freezes, i can bring up the start menu like SUPER FAST and it is visible but when i launch the task manager it is behind the game no matter what, so im always pressing the key stroke of the first letter of the game and pressing delete to see if i closed the game or not.
I actually have no problem with the Win 8.1 Start menu, but the colors of the regular desktop environment are killing me. Namely, the weird, off-off white of the menus. The High-Contrast White option under Personalization gives me the right color for the menu backgrounds but everything else about the theme screams windows 3.1, so I'd rather not resort to using that.
Is there maybe a registry tweak that I can use to change this one little color? I've tried a few things but nothing so far has worked.
See attached pic to see what I'm talking about.