Because of a virus that i caught, and after several attempts at remove virus, without success, I decided to recover the system from my laptop asus g75vx.
But now when I go to Control Panel -> System and Security -> Action Center appears that my windows is not activated, i click on "enable" and gives me an error:
"Could not activate windows, error code: 0x8007232B, Error description:" The DNS name does not exist. "
I just reinstalled 8 on a ssd and tried to install 8.1 from the store but it says i need to update windows first. I tried running windows update but i get an error saying "Windows could not search for new updates" error code 80240440. I tried everything I could find online and nothing seems to work. I tried restarting windows update, i tried turning off firewall, I tried reinstalling windows again and selecting "check for updates online" before installing from the cd, i tried running a check disk, and there is absolutely no program installed on the drive other than windows.
View 4 Replies View RelatedI just tried to integrate MSU updates to W8 Install.wim by DISM. I executed (after other commands):
Code:
DISM /image:C:mount /Add-Package /PackagePath:C:MSU
In C:MSU I have:
Code:
96 File(s) 797˙689˙211 bytes
20. 06. 2013 03:08 9˙602˙439 AMD64_ARM_X86-all-windows8-rt-kb2840632-x86_5a2074567fbc6cb4e7339dfb8adbeadfaa58b766.msu
24. 10. 2012 01:35 8˙215˙009 AMD64_IA64_X86-all-windows8-rt-kb2729462-x86_3a6f7896b3481f266299544594f1e7bcbb07701a.msu
[Code] .....
Error: 0x800f082f
Package XXXXXXXXXXXXXX may have failed due to pending updates to servicing components in the image. Try the command again.
dism.jpg
I was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
I ordered a bunch of music off amazon tonight with their new amazon music program..3 albums.
I went to move the albums from their download location to the proper music folder..and it gives me a 'item not found' error..
so..I try to delete the folder...nope..same error.
rebooted, tried again..nope..same response.
uninstalled the program, tried again...I have never even heard of this.
How to delete 'Item Not Found' and followed the steps on the link brink posted which took me here Folder - Delete from Command Prompt - Windows 7
I use the Windows Account to login to my 2 Windows 8 laptops (Lap1 and Lap2).
Lap1 - Has 1 Windows Account (Lap1Acc1)
Lap2 - Has 1 Windows Account (Lap2Acc1)
In Lap2, the Windows Account Lap2Acc1 had few problem with "Trust this computer" as Windows never sent the code in the registered email. So I created a fresh new Windows Account (call this Lap2Acc2) with new email. I deleted the Lap2Acc1 from Lap2 using User Accounts and created a new user using Lap2Acc2.
Now the problem is. Before removing Lap2Acc1, I didn't leave the HomeGroup and so, for some unknown reasons, in both of my laptops, in the HomeGroup tabs I see these users
Lap1Acc1
Lap2Acc1 (this was removed from Lap2 as a user, but it still exists in the HomeGroup)
Lap2Acc2
My new HP Pavilion with MS Win 8.1 includes all of the default MS Win sound files. I cannot access them to play for all users (family use with no password on accounts).
REQUEST: I would like a 'How-To' on both accessing and getting MS Win 8.1 default or any sound file them to play during a particular system event.
I have a Samsung Ultrabook series 5 laptop..some couple of month usage i completely remove my hard drive and change the windows 8 to windows 7..when i use windows 7 i realize windows 8 is much better then windows 7 so again i clean install of windows 8. i boot drive in PXE UEFI Only Mode. Some reserved partition created also 300MB Healthy Recovery Partition is Created.when i install a Samsung Recovery Solution Software it Says "Recovery Partition Does Not Exist"..What do i do.also when i refresh Pc it gives me Error "The Drive is Locked Where the Windows Installed" I want to make my Laptop like 1st time it was...
View 4 Replies View RelatedPC is an AMD A4 processor with 8 gb RAM, 32 bit operating system, x64 processor with win 8 pro installed. When attempting to upgrade to win 8.1 pro 64-bit iso, by clicking Mount> double click Settup, I am getting the following message: "This app cannot run on your PC. To find a version for your PC, check with the software publisher". If I installed the 32bit iso it works fine.
View 3 Replies View RelatedI have a Dell XPS 15 running windows 8.1pro. Has HDD and Ram Drive
After recent upgrades to 8.1 I am now unable to access the system. On power up goes to password ok Once entered screen goes black, eventually goes blue and tells me I have no apps.
If I look at task manager there is no activity on the SSD drive (don't know if that's relevant).
There was a similar issue when I received the system new from Dell but I can't remember the fix
I have an HP that I cannot get to activate. I did a clean install and my login is an admin. I deselected installing Norton's during the reset but it was there when I booted up so I removed it with the Norton's removal tool. I tried activating by using the "Windows activation" from the search button and then tried by using an elevated command prompt of "slui.exe 4" but both ways gave me a 0xc0000022 error.
View 5 Replies View RelatedI am having one heck of a time activating a legal Win 8 Pro.
View 9 Replies View RelatedI can't install .NET Framework 3.5 no matter what I do. I tried downloading it and in the midway get the error 0x800f0906. I tried installing through DISM but that didn't work either. It always stops at 65.8 %.
View 9 Replies View RelatedDuring update, Windows 8.1 restarts, and goes to the boot screen. Then gives this error: We couldn't complete the updates, Undoing changes. Don't turn off your computer.
All updates that were installed get undone. And if you install updates again, it will do the same thing. The reason is because of one update: IE 11 Windows 8.1 - KB2962872
I bought a laptop last July it had Windows 8 preinstalled, I had it for about a month and the screen went black on it so i sent it to a guy in my town and he fixed it but ever since it kept telling me to activate Windows 8, but it wont activate when i put in the serial code it says "Error: 0x8007007B The filename, directory name or volume label syntax is incorrect"
I've tried to fix it and i'd get it to go away for a while and it'd pop up again but since the other day whenever i turn it on it goes to this blue screen asking me to activate it and after a while on it the blue screen pops up again but it still wont activate it says "Windows can't activate at the moment"
I had Windows 8 Pro with Media Center installed on my Asus K55A laptop and it was 'activated'....no problems! So I decided to install the 8.1 Preview via the Windows Store...installation went fine. However when exploring, I noticed that it was not activated: So I entered in the the product key for my Windows 8 pro information....even purchased a Windows 8 Pro media DVD....have a copy of the email with the purchase price..So I enter in the Product Key that worked successfully with Windows 8 Pro: Received this nice message..
Error Code: 0xC004C003
Error Description: The Activation server determined the specified product key has been blocked
A note that also stated, You need to enter in the product key on the back of Windows 8 box, or the product key that came in the email that you received when you purchased the DVD....I have a copy of the email that I received with the purchased Windows 8 DVD.....there is NO product key listed at all!Now I can not even attempt to customize Windows 8.1 preview, because it is not activated.....
I am quite frustrated to say the least, and even attempted to install (clean) back to Windows 8 Pro with my purchased DVD....when I entered the same product key that was successful (only 3-4 days) ago....the installation process stalled!
So I stuck in a Windows 7 disc.....and at least the system rebooted back into Windows 8.1 Preview....but still no dam activation...I guess my only alternative is to contact Microsoft support... my Windows 8 Pro with Media Center was running beautifully and was fully activated only 2 hrs ago...
How to fix 0xC004C003 Error? (Wiki)
What is 0xC004C003 error?
The 0xC004C003 error is the Hexadecimal format of the error caused. This is common error code format used by windows and other windows compatible software and driver vendors.
This code is used by the vendor to identify the error caused. This 0xC004C003 error code has a numeric error number and a technical description. In some cases the error may have more parameters in 0xC004C003 format .This additional hexadecimal code are the address of the memory locations where the instruction(s) was loaded at the time of the error.
How To Fix 0xC004C003 Error?
Found this:
Error message when you try to activate Windows 7 or Windows Vista: "An error has occurred"
Error code Description 0xC004C003 The activation server determined the specified product key is in use.
Error: We couldn't complete the updates, Undoing changes. Don't turn off your computer.
After initial setup, I installed Windows Firewall, Avast, and Chrome. That's it so far.
I ran updates I think the first one went through. The next one didn't. And I got that error. And I tried again a few times. I tried disabling all the security software. Still the same error.
I am getting the same error code 0x80072EE7 but when i connect to the internet it says activated once i disconnect the internet it says not activated.
View 2 Replies View RelatedI just started getting this error today. It's a Microsoft Office 2013 update error, but I can find nothing by searching for it. I ran the automated update repair tool a couple of times but it did nothing.
Edit: I was able to download the update and install it, but Windows update still tries to install it and fails.
I have the same problem, and I have attach the report with this reply..
View 1 Replies View RelatedI get that error message when i try to activate windows.My product key is already entered and on the screen, and this keeps on coming up.
View 7 Replies View RelatedI have a problem with update. Last night I was connected thrugh VPN to internet and in this mood windows update get some update. now I can't download updates without VPN. I must conneced to vpn then trying to update otherwise I get error 80072EFD.
View 1 Replies View RelatedI have Windows 8.1 PRO x64bit SK (Slovakian Language Interface) + (Update 1) and Samsung Galaxy S3 GT-I9300 Android Ver. 4.3 Jelly Bean.
My problem is: Windows doesn't see my smartphone when I connect the USB cable to the phone and the computer.
I dont have installed Samsung KIES , because i trying to install KIES SW yesterday, but I was wrong and kies phone absolutely not seen and not recognized.
Trying to update drivers SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile MTP Device and SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile USB Composite Device via device manager and nothing to do , i got error message this device driver was not recognized.
Sample images:
I have a Acer Windows 8 computer and its stuck on reverting update changes and restarting. It says "Failed configuring Windows Updates Reverting changes" then restarts and then does that again. I cannot go to the desktop.
View 3 Replies View RelatedWhen I search for updates with windows update it finds the drivers I want but it gives me an error message whenever I try to install them.
I already tried downloading the latest windows update (when I install it, it says the update was succesful and asks me to restart, but when I search again after restarting the update shows up again and lets me install it again).
I also tried deleting and renaming my software distribution folder and using the windows troubleshooting program.
Overall I'm not really too fussed about most of the things it's trying to install apart from the drivers for the wireless reciever for my xbox controller as it won't work without them. When I try to install the driver files through device manager it gives me this error message
my main reason for mentioning the windows update problem is that I assume the problems are linked as the wireless reciever works perfectly on my laptop. Up to about a week ago it also worked perfectly on this computer using the same usb port that it uses now.
As you can see, on the 19th, it suddenly began to say "NULL DRIVER". I checked my system restore and it tells me that I installed a windows update on that day just before it suddenly stopped working. I tried reverting back to this restore point (before the update) and nothing had changed, the device still would not work.
I have a Windows 8.1 which I upgraded from my purchased W-8.
Decided to order the Windows 8.1 Media Center Pack. Ordered online and installed.
Got Windows Activation screen saying Windows can't activate right now. Try activating later. If that doesn't work, contact support.
The Current product key is the new one I just received.
Entering my old W-8 key doesn't work.
So when I install update 2903939 it installs fine but upon reboot it goes to 7%, reboots, reboots again as soon as the background color for the login screen shows, and then says windows was unable to update.
So far I have tried:
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
SFC /scannow
Restart background intelligence service
Remove extra USB devices
Disable antivirus ( I don't have one except for bitdefender)
Renaming distribution folder in %systemroot% to .old
SFC said something couldn't be repaired and I don't really understand the log. DISM said it repaired a store component or something. I am very lost on where to go next. I cannot seem to upload the CBS.log as a .txt I get an internal error.
I just bought my computer 2 weeks ago .. I filled in my specs and also uploaded my system info information as an attachment. Last night, I tried to download the windows 8.1 update. I let it run over night, but this morning when I woke, I had a blue screen that said windows could not fix my problem .. and gave me options to try. I ended up having to wipe my computer to factory conditions. After the restore .. the only thing I installed before downloading updates was my driver for my NVIDIA Geforce750 Ti card, and my wireless network adapter ..
I then downloaded 91 updates .. all failed .. and didn't install .. error 800F0922.
sfc /scannow .. got to 51% .. then ..
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogscbscbs.log. For example C:windowslogscbscbs.log. Note that logging is currently not supported in offline servicing scenarios.
Asus S200E notebook, Win 8 Pro
I recently took in this laptop for my neighbor. The original idea was to scan and clean up the system. I set the laptop up in my office, ran an MSE full scan with no issues. Then ran a full Malwarebytes scan, which returned a few pups, which were removed.
After tending to other matters, I turned back to the laptop to find notification that there was a problem and windows had to restart. I ran another MWB scan only to have the system restart again. This time, the system tried to repair itself with automatic repair. No go. All reboots ended up back at the advanced startup options screen. No ability to restore the system image, no system restore. All I could get to was the cmd prompt.
Googling turned up all sorts of people with this issue (mostly older posts), but very few solutions.
This fix got my system booted again by removing pending update operations.
Apparently, an MS update is the source of the problem. To further reinforce this, until I turned off automatic updating, it would happen again. I also disconnected the machine from my network to revoke its internet access.
So the machine is no longer having start issues, but I'm not sure which update it is. I have 17 pending optional updates, but those haven't installed, so I doubt they're an issue.
I checked update history and there are 29 failed updates. All are dated within the period that the laptop has been in my possession.
I think it would be quit tedious to hide each one individually, only to blue screen, enter the DISM fix, get back into windows and do it all again. How I could identify which update is resulting in the stop error.
To muddy the waters, I've been trying to image the drive via Acronis TI 2014 but can't complete due to 'found disk errors' on C:. Trying to create a system image from within windows halts due to disk errors also, but chkdsk reports no errors (from windows and from cmd).
I have installed Windows 8.1 Update 1 Pro Version a few weeks back on my desktop computer running 64 bit version of the OS. The OS was running perfectly fine until today when it started showing activation error. This is not right since I had installed Windows 8.1 Update 1 with a legit key since I have an MSDN subscription As you can see in below pic. It says that you can activate the Windows Machine now
Now I went ahead and tried to activate the windows by the key which I had intially activated and also with a new fresh different key which I haven't any activated windows machine yet. Both the steps didn't yield any fruitful results
1) When I hit "Activate" button
2) When I click "Error Details"
3) When I click "See Support info online" - Nothing happens
I have tried below troubleshooting steps but nothing happened yet
Run sfc/scannow command. This failed at 42%Tried to scan registry and fix the registry by using Advanced System Care 7.2 Pro EditionRefresh the PC. PC was unable to refresh. I had inserted my OS USB DriveTried System Restore to yesterday state. System Restore too failedUninstalled Windows Updates that were installed yesterday.
