"Speech recognition could not start because the language configuration is not supported" . That's the message I get when I try to open the speech recognition program.
Well I am greek and my windows are in greek version as well. As I understood from this message the greek ver. of Win 8 doesnt support speech recognition...
Here is a screenshot of my problem: Screenshot by Lightshot
I've successfully setup Speech Recognition but when I restart the computer, I receive the following error message...
When I try accessing "Advanced speech properties" to troubleshoot, I receive the following error "could not initialize volume meter. Please select a different audio input device".
Then the "Speech Properties" dialog box pops up and when I click "Advanced" and select the audio input device, the "Speech Properties" dialog box freezes every time when I try to hit "Apply".
Running Windows 8.1 x64
I want to backup my windows 8.1 start screen app (only) with user configuration of those app.I want to do this,so that I can restore this app on my another computer running on windows 8.1. How to do this.
View 3 Replies View RelatedVoice Recognition command to access or open a toolbar? I've tried "click + toolbar name" "open + toolbar name" "press + toolbar name"
View 5 Replies View RelatedI bought the sony laptop with single language pack. The OS language is in spanish. I need to change the language to english. How to change the OS language in single language windows 8.
View 1 Replies View RelatedI bought a windows tablet to use as an ereader.
I'd like to use text to speech for when my eyes get tired.
Is there any way to use text to speech without narrator? When I turn it on it's incredibly annoying and slows down navigation.
I just want to be able to select text and/or pages and have them read, but ONLY text that I'm selecting. I don't want every single thing I click on to be read off to me.
I have very recently bought a Dell Inspiron 15z with the facial recognition software. Unfortunately, I can't find where to download it. Link to the download page?
View 5 Replies View RelatedToday I updated my Windows 8 install to Windows 8.1.
For the most part it went smoothly but I'm having a weird problem with my text to speech files.
But when I hit speak the voice is very distorted and the volume is low, it's the same for all the voices including the Microsoft ones.
I reinstalled TextAloud to the latest version, and I reinstalled the Lucy voice, (really the only one I use).
I figured that I had some glitch in the software but here is the weird part, when I played one of my Lucy videos the voice in the video shows the same distortion, so do .wav files that I had previously made and saved.
Windows normal sounds are unaffected as are music files. Even the music in the videos is normal while the speech is distorted.
When I played one of my videos that I have on Vimeo the voice is distorted. So something is affecting only the text to speech voices not any of the other sounds no matter what the source.
I don't have a clue, If I can't figure this out I'll have to go back to my Windows 8 backup image.I use TextAloud almost every day.
I updated my sound drivers, no change! SB Recon3D PCle sound card.
yesterday I did the Windows update and ever since I have a random speech bubble that flashes at the bottom right of the screen, next to the time. It comes up and disappears too quick for me to see what it is or even click it.
how to stop it from happening. It does nothing to my performance or anything, but I would prefer if it to go away, it's pretty disturbing.
Text to speech is not working at all. I use Mumble and it is very important because I run the server. I checked the text to speech settings in windows, and mumble. When I hit "Preview" In either one, it highlights the text, and I hear nothing. Sound is coming out, just not text to speech.
View 4 Replies View RelatedI have spoken twice to Dell Support on my brand new Dell 17 7737 and I keep getting "Service Tag is Not supported" when I try to go to the factory installed 3rd party software re-install support page. Neither time, and both of them were really lengthy calls, could not resolve the issue.
What gives, a brand new computer is not supported.
I've got a Q9400 here and I just tried installing Win8.1, but I'm getting this error:
"You can't install Windows 8.1 because your processor doesn't support CompareExchange128."
I can't change the CPU so what can I do? I don't understand why my CPU isn't supported and this sucks because I bought Win8Pro recently...
I get the following errors when running the all versions of Angry Birds on Windows 8 DESKTOP, These are the Desktop Version of Angry Birds and not the Metro Version
They run perfectly fine on Windows 7 but not so on Windows 8
Angry Birds/Rio/Space/Star Wars all give the same error:
OpenGL 2.0 renderer not supported! Reason:
OpenGL 2.0 is not supported
OpenGL 1.4 renderer not supported! Reason:
OpenGL 1.3 is not supported
I know that there are metro versions of Space and Star Wars available but still can't I run the Desktop versions?
Bad Piggies is working absolutely fine. Is there any way I can run them on Windows 8 Desktop Mode?
How can I modify an Windows 8.1 ISO so it can work with a non-supported CPU? I would like to make it work with a Pentium 4 2.8Ghz HT Northwood CPU. Rest of specs; 2GB RAM, ATI 4650 DDR3 1GB, 250GB HDD. Computer is a SONY VAIO PCV-RS430G. I updated its BIOS to latest which dates back to 2004 but did not add the NX/PAE that is needed for Win 8.1
View 6 Replies View RelatedI have an AMD HD 7870 based graphics card working with Windows 8 Pro 64 bit. I want to check which graphics modes are supported (not just by the currently connected monitor). Is there a method or utility available which interrogates the graphics card to list the graphics modes supported?
View 8 Replies View RelatedWindows 8 fail to bootup normally n keep on poping up the message thus 'the uuid type is not supported"
View 2 Replies View RelatedI remotely support a couple of relatives using Team Viewer, and am able (and do) to sometimes go into their systems to carry out updates without them being there.
I would like to leave a sticky note of some sort on their Windows 8.1 start screens after I have been there to tell them what I have done. I would like them to easily delete the note once it has been read. Is this possible on the start screen, or is the way that it works unsuitable for this sort of thing?
Any simple application that can do this? I have looked on the web for suitable applications, but those that I have found seem unsuitable for one reason or another.
When attempting to install Creative drivers for X-Fi cards you may receive this message:
"unable to detect supported product"
and of course that's as far as you get.
To resolve this issue:
1. Uninstall the current drivers.
2. Shutdown and power off. Physically remove the audio card.
3. VERY IMPORTANT STEP: Boot at least once with the audio card removed.
4. Shutdown and power off. Re-install audio card.
5. Bootup. Re-install drivers.
Normally, I'm used to install Windows 8.1 by running setup.exe from Windows Explorer(not by boot DVD/Flash Drive). But yesterday when I tried to install it by a boot dvd, I faced a problem which's solution I couldn't find in google, when I press any key after the message appears(Press any key to boot from cd/dvd), the setup loads and my display goes black and shows a message "The current input timing isn't supported by the monitor display. change your input timing tp 1280x1024@60Hz or any other monitor listed timing as per the monitor applications."
I needed to restart the PC by the button in the CPU and couldn't install Windows.
Note : My monitor's manufacturer is Dell
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
Config details
Acer x153W monitor
Gigabyte B75M D3H motherboard
Intel core i3 3220 ,4GB RAM sandisk
Intel HD graphics 4000
Windows 8.1 x64 RTM
Firstly I created a partition of 1 GB on my 128GB OCZ Agility 3
Then I used bitlocker to encrypt it, and then for some reason when I tried to reboot the computer after doing the aforementioned, I get the message that windows cant boot, because the boot configuration is missing or conatins errors
I dont see how BitLocker and Disk Management can screw something up so much so that they either deleted or encrypted my boot config rendering me unable to boot up the computer.
What I did was shrinking the c:drive by 1000mb then formatted and partitioned those 1000 mb into a new drive. Secondly I encrypted the 1gig with Bitlocker with a short 12-character password.
I am now unable to boot up my laptop.
So I created a brand new user in Windows 8 using my MSA. And I set it to set up as a new PC so that it wouldn't carry over themes or any settings from the previous computer. But as soon as I signed in, it had all of my old settings, themes, and configurations from my old computer.
So how do I set it so that it goes back to all the default settings like a brand new user logging into Windows for the first time?
in Windows 8 system configuration restore is too much slower than win7. Why. There is a way to speed up it?
View 2 Replies View RelatedI bought a new lenovo laptop with built-in windows 8 OS. Just after a few days I started using it, networking problems arose. When I tried to connect to a wireless router,it shows connected but could not browse even. Troubleshooting gives a message that "WiFi does not have a valid IP configurations" or "Problem with wireless adopter and access point" or "Network cable is not properly plugged in". I contacted Lenovo chat support and tried re-installing the latest drivers, but couldn't solve the problem. i still couldn't connect to the wireless network properly.
View 6 Replies View RelatedMy brother brought his PC to me with the above error.
The rest of it is File: BCD and error code 0xc0000034. And of course being my brother he did not make a recovery CD. There is also no windows twenty five digit serial number sticker on the case.
Network:
Verison Router w/ DHCP 192.168.1.X
DLINK access point using DLINK router w/ DHCP 192.168.0.X
Cisco access point using DLINK router w/ DHCP 192.168.0.X
Problem:
New Toshiba notebook connects to Verizon router without difficulty, but cannot connect to DLINK or CISCO without "LIMITED" usage (IP configuration error) [With a lot of reset, renew and Windows 8 troubleshooting it will connect to the DLINK for about an hour, but the magic must be repeated after an hour or so]
History:
4 other Notebooks connect succesfully to any of the 3 access points
3 Phones connect succesfully to any of the 3 access points
2 Tablets connect succesfully to any of the 3 access points
Reason for DLINK or Cisco Connection:
Verizon router is outside of the local network containing shared drives.
More details:
available to serious responders
Is it possible to configure Windows Store so it'll only show free apps or showing without the picture? My internet connection is not that fast and every time I tried to browse, it takes few seconds to load up a page, if I can just display types of apps (free, etc.) or list apps (without icon/picture), it'll speed up the loading time, but I can't find anywhere to configure this.
View 2 Replies View RelatedMy daughters Windows 8 laptop is now displaying "The Boot Configuration Data for your PC is missing or contain errors".
File:BootBCD
Error code: 0xc00000001
I can get access onto F2 but that's all.
I have a brand new PC workstation.
Everything was fine, until recently, when I turn on my PC, I don't get an immediate internet connection. This is happening nearly everytime now with some frequency.
I reset the router/modem and everything is fine after that, so all is good.
But it is still frustrating. I get, "Ethernet doesn't have a valid IP configuration".
Following are screenshots of my 'ipconfig' and 'Network Connection Status' before (unsuccessful) and after (successful) internet access:
You will see from the above that there is certainly something different with the data...
Incidentally, I did find a nice youtube 'tutorial' in relation to this subject title about manually configurating the settings:
I haven't tried this yet and that is probably down to the fact that I can't find my alternate DNS server setting (the very last box to fill in - watch the video and you will know what I mean) ???
Last night I set Acronis Disk Director to merge two partitions on my C drive. I had an unnallocated 100mb that used to be partitioned as system reserved, but I deleted that partition as it was not needed. So I made a new partition out of that unallocated space and set it to merge with my primary partition on my c drive. It restarted my computer and 40% through, showed an error and restarted quickly. Now I get the following message when attempting to boot my computer:
File: BootBCD
Status: 0xc0000225
Info: The Boot Configuration Data for your PC is missing or contains errors.
The second partition, that I attempted to merge, now has 1mb of space on it. Whenever I try to run chkdsk on the primary partition, it says that the disk structure is corrupt and unreadable. I need my c drive recovered.
I am able to connect to my wifi at home. but, when im trying to connect to the wifi in my school it is saying wifi do not have a valid configuration.
View 1 Replies View Related