I have an Intel Pentium 4 (32-bit) Machine with a 2.80 GHz processor with a 1 GB of RAM and " hp pavilion 06 motherboard system model df142a-abu-a145 Is it possible to install and run Windows 8 (any version) on this PC configuration? I think it is possible the system requirements of Win 8 are the same as for Windows 7. I am currently win 7 without any sort of problem.
View 9 Replies
I went to update my father's old PC to 8.1 and I get the message that his CPU is not supported. That you need the combination of SSE2+NX+PAE.
He has a Intel Pentium 4 Prescott 630 3GHz. I looked it up and it should qualify for the upgrade. I ran CPUID and it says it has the SSE instructions (says MMX, SSE (1, 2, 3), EM64T).
I'm pretty sure it supports PAE (how do I check that???).
And in the BIOS, the Execute Disable Bit is turned ON (this is Intel's equivalent to NX?).
Is there any way to bypass this check and install the OS?
i have a PC with these specs, processor: intel pentium 4 ht 3ghz 2.99ghz RAM: 1.5 gb video: 128mb intel 915 ( i accidentally bought win 8 preview version and even aero worked, not to mention good speed and stability, it made the video memory 256mb i dont know how! and why!) OS: win 7 32bit ultimate( planning to upgrade to 8 RTM)
View 5 Replies View RelatedI am writing because I wanted to install windows 8 on my pc ... but since it is a Pentium 4 with a 3.2...motherboard ASUS P4C800, motherboard only supports Socket 478 and Socket 478 with no pentium 4 supports specific XD "no eXecute".. there is no way to bypass this control?
View 9 Replies View RelatedCan I run windows 8 in my INtel D101GGC mother board with intel pentium 4 processor with ati radeon Xpress 200 series video card? Where can I get drivers for my pc?
View 1 Replies View RelatedI have Intel 845 Motherboard with 1GB RAM running Pentium 4 1.7ghz.
CPU working but no display, RAM is OK, fan is running, USB ports are working, Applied new thermal paste etc. But no display and monitor is also okay.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedI have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
View 2 Replies View RelatedI have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
I have Windows 8 consumer preview installed on my laptop. A couple days ago its licence expired, so I got Windows 8 professional to upgrade.
I made an install USB with the win7 USB utility and proceeded to boot from the stick. The setup then told me I should restart my pc and restart the installation from windows.
I did that, but Windows 8 setup won't start. It just starts reading from the usb for a second, then stops. The setup from the .iso I downloaded does the same thing.
To make things more interesting, the first time I restarted my PC after trying to upgrade windows from USB at start-up, I ran Windows 8 setup and it did start and started doing some things, on that small blue screen that pops up. I didn't pay attention to it until the blue setup screen disappeared and nothing else happened...
One more thing, I tried to install Microsoft windows server 2012 on my laptop a month ago and the same thing happened with the setup.
Did a few hours of research on the internet, tried to run it in compatibility mode.Can't really afford to do a "clean" install now, and on top of that, my PC reboots every 2 hours because my licence is expired...
I have an ASUS mother board and don't use an graphics card.
I had two monitors and an HDMI cable plugged in. The short story is that the Intel drivers seem to get lost.
Windows installed normally until it went into to the final setup.
The program will switch to another screen at this point and picked a monitor and the HDMI to TV connection.
Unplugging the HDMI cable allowed me to finish.
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
Config details
Acer x153W monitor
Gigabyte B75M D3H motherboard
Intel core i3 3220 ,4GB RAM sandisk
Intel HD graphics 4000
Windows 8.1 x64 RTM
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I can install Windows 8 in my SSD, right?
I'm currently using windows 7 and want to install 8.1
I just launched the setup, and on the window where it asks what to keep, the only option is 'Nothing'.
Does windows 8.1 setup delete everything I've got on my current partition, or will it transfer my current system into a windows.old folder like Windows 7 Setup does?
Because I really need to keep my files.
I previously setup a DVP 11 pro tablet by logging in with my outlook.com email account.
Now I am about to setup an AIO desktop . So I am sure the same questions will be asked about logging in with email account and password when first powering up the computer.
My questions are:
a) Should I use the same outlook.com email and password for the second computer as the first ? Will Win 8 even accept this because one tablet is already setup using this same email address and pw . Even if it accepts what are the implications?
b) I would prefer not to sync the Tablet and the AIO computer . In this case should I setup another outlook.com account with separate email address and PW? I guess I can do this by clicking on setup a new account .
c) Actually I would prefer to setup the 2nd computer with local account . But from my experience with the DVP 11 Pro , this option is not available in the setup screens. ie I can't get pass the the first screen that asks for email and password. Since this is a purchased machine and not a clean install , I believe the only way to do this is to first setup with an email account then subsequently disconnect and setup local name and password.
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
View 2 Replies View RelatedMy friend has an ultrabook (hp envy 6-1113tx) which came with windows 8 pre-installed and after of more than 1 year of usage the OS became unstable and sluggish so he wanted to do a reinstall. I made bootable usb and enabled the legacy mode in BIOS after which the usb became visible in boot options. But it didn't show any HDD to install the OS on during installation. And also the HDD partition style is GPT.
View 4 Replies View RelatedI want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
I am installing the Windows 8 upgrage on a windows 7 professional 64 machine.
The upgrade assistant noted the DVD and Secure boot issues that I believe are common incompatibilities.
I ordered the $39.99 upgrade and tried to install and it fails out at 32%
Never asks for product key.
I have chkdsk/r/f, turned off Avast, backed up with no success.
Of course MS is not taking calls over the weekend for this little problem, so i remain frustrated and a little disappointed.
I have an HP Envy with Windows 8 pre-installed. I am trying to do a dual boot setup with windows 7, as some of the software I use daily, is not compatible with Windows 8. The new software has yet to be released, and will not run in any compatibility modes.
Knowing this is beating a dead horse, I have searched for hours, and have gotten some of the pre-req stuff done ie: created virtual drive 20gb, initialized it, turned UEFI Mode/Secure Boot OFF, etc.
I can see the vhd, but when I try to load win7, the vhd is not visible. When I exit win7 install, and Windows 8 reboots, I can no longer see the vhd.
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
