I finally found out a way to access the Test Mode in Windows 8.1 Pro Update 1 to get unsigned drivers to work, but the side-effect is there is a watermark, which can be removed if you disable the Test Mode. I want the Test Mode to stay enabled, but the watermark gone!
View 5 RepliesI have to run with driver signature enforcement turned off permanently as I use an AMD switchable graphics laptop, and it is not supported by AMD and am forced to run usermade drivers with no signature. How can I remove this watermark without messing with Windows version displayed in winver?
To add to this, I used MyWCPWatermark to remove the Test Mode text after I activated. Now I am activated with the Windows version and build number text still on the bottom right of the screen. I can't use MyWCP anymore, it just asks if I am on Windows 8 beta.
My friend is a coder and he said he has to have the Test Mode on to test some stuff but that he's annoyed by the watermark ...
All good so far, we ran the utility caled My WCP Watermark Editor and removed it successfully. But, later on he changed his display language from English to native and the watermark was back (in the native language). We tried using the My WCP Watermark Editor again but it gave an error every time, no matter what we tried.
It was basically like that; install the REG change to be able to take ownership of files (Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8).
Then copy the shell32.dll.mui from the %WINDIR%System32En-US (or in the native language in my friend's case) and open it with the Resource Hacker (Resource Hacker).
Find a certain string and delete the entry that can be seen in the watermark. Then copy the basebrd.dll.mui from the %WINDIR%BrandingBasebrden-US folder and edit it with the Resource Hacker, find certain string and remove it.
Then overwrite the files with the changed ones (that's why the "take ownership" REG change was needed). After that we uninstalled the REG and rebooted.
After that I run mcbuilder.exe and after a couple of seconds it just closed the CMD screen.
The watermarks are gone - what I'd like to ask is:
Did I do right by running mcbuilder after the reboot or should I do it before?
Is this safe? Is it likely that it could cause any system unstability or whatsoever in the future? Or are we perfectly fine?
My computer cannot sleep!
I did a fresh install (upgrade) and the moment I got the desktop up and idle, I tried to put the computer to sleep. It did, then 5 seconds later, on it came again.
Event viewer says "wake source unknown".
I have updated all drivers from asus, and installed all windows updates. No difference.
I have used every tool POWERCFG gives, it's report is clean, there are no wake requests, all devices (mouse keyboard) have had their wake ability disabled, I have even disable ALL devices in bios, booted without a keyboard and mouse and still, it wakes as soon as it's put to sleep. Even with all on board devices disabled except for sata.
Wake source: unknown.
I boot into Win 7 from another hard drive, no issues.
One thing to note is that from a fresh restart, if i put it to sleep, it stays asleep. Once waked, it will never sleep again. Restart the system, leave for idle for ages, hit the power button; it goes to sleep and stays. After waking, it never stays asleep again.
I have tried safe mode. no difference.
I have disabled all services. I have changed all the power settings to disable wake timers and to allow sleep during sharing. Still no difference.
What's up with my Asus Z8P68-V Pro that disagrees with windows 8? All my other machines have no issue.
I have no choice but to keep using Win7 at the moment, I can't have a computer that doesn't sleep.
I recently tried the "sfc /scannow" command. It said it fixed corruptions and after a restart a "Windows 8.1 Pro" watermark showed. I tried to remove it using the My_WCP_Watermark_Editor.exe app. However, it gave me errors in various Modern Apps like the Windows Store app wherein it would crash whenever I type something in the search bar. I did the "sfc /scannow" command again and it fixed the Modern Apps errors but the watermark appeared again. How to remove this watermark it is very annoying. Don't tell me to activate my Windows because it is already activated. I can use the Personalization settings in the start screen.
It added the "Test Mode" and the "Build 9600" because I accidentally clicked the apply settings the first time opening the app. There must be some way to remove the annoying watermark...
Capture.JPG I want to remove watermark. Have any people know that.
View 9 Replies View RelatedI just upgraded my legal copy of Windows 8 to Windows 8.1. I've also installed all the currently available updates. The problem I'm faced now is the watermark on my wallpaper near the clock (Bottom-right side of the desktop). It currently says: "Windows 8.1 SecureBoot isn't configured corrently Build 9600" .
I have to admit, I have disabled secure boot. I don't know if I'm allowed to talk about this in these forums, but let's just say I have another OS installed an my PC (I use GRUB to load the two Operating Systems)...
In my brothers rig has the GMA x4500 as video card integrated so he has win 8 and he installed a custom modded driver to access to control panel and to config openGl and other things now he was asked to enable test mode before installing that driver and disable driver signing after he finished every thing he disabled back test mode but the system is keeping using it and the watermark stays
at the bottom I tried these
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF
with no sign of being removed
How can I remove the Windows 8.1 Enterprise Watermark on my laptop?
On the right bottom side this is what Windows 8.1 says.
"Windows 8.1 Enterprise Evaluation Windows License Valid for 90 days Build 9600"
I run Windows 8.1 Enterprise 64 bits.
i have problems removing watermark for W8 pro build 9600.
It seems like i cant find patched files to replace original ones.
Looking for correct files for this version.
if there are any edited files, will it also work on build 9200 ?
I have this sign covering my screen, why it is transparent but very big and annoying!
View 8 Replies View RelatedHow to remove watermark complete in 8.1 Build 9477 .
View 5 Replies View Relatednot sure if this has been posted but download this update from the Ms site if your watermark with this message doesn't disappear after you've activated your Windows 8.1 installation.
Download Update for Windows 8.1 for x64-based Systems (KB2902864) from Official Microsoft Download Center
I got the message after updating an HP sleekbook 4 laptop to Windows 8.1 enterprise (TechNet version from ISO) from the Windows 8 pro that was pre-installed with the laptop (plus all the other zillion bits of bloat /ad / crapware).-- I disabled protected boot -- more trouble than it's worth - especially if you are testing OS'es -- but KEPT the UEFI .
now that windows 8 no longer has safemode or the old F8 menu how do you remove a stubborn virus or malware that after booting attepts to lockout the user and prevent other programs running. back in older versions you could boot into safemode or boot from a bootdisk and cleanup, so now whats the procedure ?
View 3 Replies View RelatedMy Windows 8.1 pro desktop system,is going to sleep after a few mins of staying idle.I was having windows 7 before this and I never faced any issue.It was recently that I upgraded my OS to windows 8.1 pro. This is a clean install of the OS.
By staying idle, I mean, I am reading some newspaper or some pdf file or something like that online without any activitiy on the keyboard.After a few mins, it automatically goes into sleep mode. This is making me mad, as I could be in the middle of something while reading documents and it goes into sleep.
In the power options, I have changed it to High Performance plan, I have verified that, "Turn of Display" and "Put the computer to sleep" options are "Never". When I click on "Advanced Power Settings" , I can see that , under sleep, "sleep after" is never. Allow Hybrid sleep is "Off". Hibernate after is "Never".
I just wanted to add, that the event viewer shows the following entries...
The system is entering sleep.
Sleep Reason: System Idle
The kernel power manager has initiated a shutdown transition.
The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance.
The system has returned from a low power state.
Sleep Time: 2014-06-21T05:51:33.970250600Z
Wake Time: 2014-06-21T05:52:23.968079800Z
I also tried to create a new power profile but this did not work. I ran sfc scanow and also fixed errors. I have all latest windows updates. I have also tried DISM
I can't even read something without fear and I have to keep moving my mouse every minute and I can't even concentrate.
So recently, I've noticed my taskbar icons stay lit up, even when I'm not using them or I'm on a different task
View 3 Replies View RelatedI've noticed that even though I didn't run 'Reader' it's running and in Task Manager. At times I also see 'Store' running when I haven't run it. Any way to prevent unwanted apps from running?? I'm well aware of how to close them.
View 6 Replies View RelatedOn PC, has a problem with the PS2 keyboard and mouse staying on after the PC is turned off...the lights are still on.
The only thing different when I had it was the keyboard and muse and the OS....I use a logitech G510 and a Razer DeathAdder, both USB and the OS was 7 Ultimate 64 bit. My sons system is running 7 Pro 64 bit and using an old OEM HP keyboard/mouse.
Using Windows 8 IE 10. I have a long list of favorites that I like to keep on the left side of my screen. For some reason the list does not always stay there. I have to go to the "Star" ( view Favorites") on the top right and use the pin favorites which will then put on the left, but they do not always stay there. I seems like a continous process. Is there a setting I am not doing right?
View 8 Replies View RelatedMy system sounds work fine: if I navigate to the folder c:windowsmedia and double-click on a particular sound it plays correctly. However, if I go to Control PanelSound and select the "Sounds" tab none of the system sounds responds when I click on the green "Test" button.
View 3 Replies View RelatedI upgraded to Windows 8.1 from my OEM version of Windows 8 on a machine that's about 4 months old. I'm seeing a watermark showing the release version and complaining about my UEFI secureboot setup. Any way beyond locking my UEFI BIOS?
View 9 Replies View RelatedI just got Windows 8.1 Ent. and I am starting to get irritated by the "Activate Windows" watermark, so I started looking for ways to activate the OS. Unfortunately, I didn't manage to find a functioning one, and KMS Auto didn't work.
So are there any other ways to activate Windows 8.1, or at least get rid of that watermark.
I have had Win 8 Pro up and running for about a month and I am having a continuing printing problem. I have 2 printers that I am trying to print to. An HP 4250 and a Ricoh C821DN. Both are on the network and I access them through the local IP address. They both installed fine, but half the time I cannot print to them. When I print, the print command finishes, but nothing prints and nothing is in the que.
I try printing a test page and I get an error box saying that "Test Page Failed to Print". Running through the troubleshooter only makes the printer the default printer and that has no effect. I can see the printer through my browser by typing in the IP address and everything is fine. I also have my laptop running windows 7 right next to me on the network and it prints to both printers just fine.
Sometimes Win 8 will print and sometimes it wont, often for hours at a time.
I built my computer, and since i got several differents bsod. Never the same
-KMODE EXCEPT
-IRQL NOT LESS OR EQUAL
-NTFS FILE SYSTEM
and some other ...
They can happened during a game (league of legend / watch_dogs), while skypping with friend or just when i'm browsing. I already did a Memtest,ok OCCT test, temps are ok.
I joined the .zip of the debugger.
Dump File : 070714-4921-01.dmp
Crash Time : 07/07/2014 23:56:20
Bug Check String : NTFS_FILE_SYSTEM
Bug Check Code : 0x00000024
Parameter 1 : 000000b5`00190637
Parameter 2 : ffffd000`21dccef8
[Code] ......
I have done a fresh install of Windows 8.1 Pro Build 9600 using a genuine MSDN ISO.
After the installation was complete i did all the updates and after that i decided to activate.
The activation was a success and the watermark disappeared but after a restart it came back on my desktop.
If in CMD i type "slmgr/xpr" it says widows is permanent activated so how come the watermark is still there?
Past Friday windows 8.1 ran some updates and I think it's since then the watermark with SecureBoot disappeared from my desktop.
I tried to remove this watermark before with my friend; My2cents. But we couldn't remove it because I had not eufi boot control panel. He told me he would provide a workaround to remove the thing and now it's solved.
I have this issue and my mainboard Intel DH61BF and DVB-S card (skystar2 express HD)
windows installed with UEFI mode.
before that my OS was win8 pro WMC installed with UEFI mode and no watermark in desktop
I'm trying to run MEMTEST86 to test some memory which I suspect is bad so I can RMA it. I have 2x kits of 8GB DDR3 memory. Since I put in the second kit my PC has randomly been rebooting with no onscreen errors. I took that 8GB kit out and now it doesn't reboot anymore. But in order to have it RMA'd Corsair requires me to provide Memtest results.
Anyway, my PC doesn't have an optical drive so I have used memtest's USB Boot installer thing to create a bootable USB stick and plugged that in.
I am running Windows 8 and an Asus P8Z77-M Pro motherboard.
When I go in the BIOS the USB drive is detected there, it is a Lexar drive. If I set my boot order to be USB -> then my SSD it doesn't boot from the USB at all, it just goes straight to booting into Windows.
If I just tap F8 whilst booting to manually choose what I want to boot from I see the Lexar USB stick in there but if I choose it I start to see that Windows 8 blue dot rotating loading thing, then it just freezes in place and nothing happens. Neither the USB or Windows boots at that point and I have to manually reboot the PC.
Something of note in order to get Windows to boot normally I can't specifically choose my SSD as the boot device, I have to choose the uhh..I think it's called Windows Boot Loader or something like that in the BIOS.
how to remove this watermark? In UEFI BIOS I have disabled "secureboot" ...
[Update]
[URL]
So I was having some problems before but I reinstalled Win 8, made sure it's activated, and everything seems to be working well. I upgraded again to Win 8.1, and the pesky watermark is back.
It's not a huge deal, but is there a way to get rid of it? If not, will it go away by the time the official update is released?
I'm running Win 8.1 Pro and I have this annoying watermark in the lower right corner that says "Windows 8.1 Pro". I tried the "My_WCP watermark editor", but that didn't work.
View 8 Replies View Related