Setup Installation :: Remove Secure Boot Isn't Configured Properly Watermark
Oct 31, 2013
not sure if this has been posted but download this update from the Ms site if your watermark with this message doesn't disappear after you've activated your Windows 8.1 installation.
Download Update for Windows 8.1 for x64-based Systems (KB2902864) from Official Microsoft Download Center
I got the message after updating an HP sleekbook 4 laptop to Windows 8.1 enterprise (TechNet version from ISO) from the Windows 8 pro that was pre-installed with the laptop (plus all the other zillion bits of bloat /ad / crapware).-- I disabled protected boot -- more trouble than it's worth - especially if you are testing OS'es -- but KEPT the UEFI .
View 1 Replies
ADVERTISEMENT
Oct 21, 2013
Windows 8.1 64 bit pc48 GB RamIntel i7 - 3960X CPUBoxxTech ComputerDrive C: SSD - 446 GB
When I first got my new personal computer in January, I created a System Image using Microsoft's utility. I typically use Acronis for my backups, but after major changes, I use both Microsoft and Acronis.
Now, I am attempting to complete a System Image Backup using Microsoft's utility so that I can fix my SecureBoot concern, knowing that I have a safety net in place. Unfortunately, I am unable to complete a backup. BoxxTech suggests that I use Microsoft's utility.
I begin with the File History in the Control Panel as shown below. Note, that I have plenty of room on my FreeAgent F Drive (standalone USB drive). Yet, Microsoft's utility believes otherwise.
Only the three items that shown to be selected are selected. In other words, there are no other drives or partitions off-screen that are selected.
Thinking that it might be a problem with my external USB hard drive, I look at using one of my internal drives, T.
I get the same error message as shown earlier.
why I am unable to back-up my personal computer using Windows 8.1?
View 9 Replies
View Related
Dec 4, 2013
When I updated to 8.1 it gave me the Watermark in the bottom corner about SecureBoot not being configured correctly.
Now I don't know when it happened and I've only noticed in the last couple days that Watermark has gone ....
I don't know if any of the updates since have done it ....
View 6 Replies
View Related
Oct 19, 2013
For those of us who have a PC capable of SecureBoot, but where we have chosen knowingly and intentionally to enable Legacy Boot, there has to be a way to get rid of the watermark. So, how to do it? Using the Group Policy editor to enable/disable "Use enhanced Boot Configuration Data validation profile" had no effect on my Samsung laptop.
View 3 Replies
View Related
Jan 15, 2014
i have a Lenovo Ideapad Z585 running Windows 8, secure boot, gpt paritioning and UEFI bios.The laptop comes with a factory shipped 1TB Sata drive which i want to replace with a Kingston V300 SDD 120GB drive.
I have followed this guide How to Migrate OS to new Hard disk.Ive run this in another desktop, it completes and i shut down, remove the destination and insert it into the laptop - power up and it blue screens with There has been an unexpected error message. Trying to access the recovery partition says it is damaged but looks like its almost going to load. Looking at the drive in EaseUS paritition master the paritions look a perfect copy apart from the proportional sizing.
AHCI is enabled in bios - i've tried EaseUS Backup clone, task was successfull but again blue screens but this time with a attached device cant be found.
One thing i wasnt sure about, the PC i done the cloning in has a RAID stripe setup but not sure if this effects it.Any one had success in cloning a GPT drive over to a SSD?
I cant do a fresh installation of windows 8 as i dont have recovery discs, nor does the onekey recovery software allow me to do so and id like to keep the recovery parition in tact really.
View 7 Replies
View Related
Feb 2, 2014
I want to disable secure boot so i can use my new gpu but I've heard that you must disable secure boot and enable legacy boot. If I do this, can i still boot Windows 8 or do you have to reinstall windows 8?
View 3 Replies
View Related
Oct 11, 2013
I had a bit of a problem with Malware which led me to reinstall windows 8. I had also at the time been trying to install Linux to dual boot beside it. However, upon reinstalling I got the annoying watermark saying "Secureboot isn't configured correctly." Having decided I would rather remove the watermark and having gone back into the BIOS (with a reinstall) and trying to enable secure boot I get a message - "CSM is Loaded! Disable the CSM via Setup and repeat operation after Restart".
However there is, as far a I can see no option to disable the CSM in my bios - I've tried disabling anything related to Legacy and reinstalling both Ubuntu and Windows 8 as well as wiping the drive and jumping the CMOS as well as updating the BIOS.
I've tried every permutation in the BIOS. Could possibly be an incompatibility with graphics card, but wouldn't know where to start on that end if it is.
View 9 Replies
View Related
Oct 1, 2013
I have this issue and my mainboard Intel DH61BF and DVB-S card (skystar2 express HD)
windows installed with UEFI mode.
before that my OS was win8 pro WMC installed with UEFI mode and no watermark in desktop
View 9 Replies
View Related
Jul 29, 2014
I am having an issue with downgrading to Windows 7 and It's not nearly as easy as normally installing an OS. I get to the expanding files screen, and once the system reboots it goes back to the Windows 7 install screen. This is an issue, because it should continue with the installation.
View 2 Replies
View Related
Aug 29, 2013
how to remove this watermark? In UEFI BIOS I have disabled "secureboot" ...
[Update]
[URL]
View 9 Replies
View Related
Jul 30, 2014
I have a Windows 8.1 Update 1 ISO and would like to use it to perform a clean install on a system which supports UEFI Secure Boot but has no optical drive. What would be the best way to approach this?
WIMBoot would be nice to have as well, if there's a way to do it without making things too complicated.
View 9 Replies
View Related
Aug 21, 2013
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
View 2 Replies
View Related
Feb 2, 2013
I had ubuntu within my windows 7 earlier. Later when i installed windows 8, i formatted the partition ( E: ) in which ubuntu was installed, since the wubi uninstaller was not working. Still when i start my system, it shows ubuntu listed in the boot list. I tried to load it once. It gave an error. There is no error when i select the default windows 8.
Now i checked the boot option in the msconfig as per the thread, but only windows 8 is listed there, no ubuntu. But still it is listed in the boot menu. I tried the disk manager, the only partition without NTFS file system is the one with status "healthy (OEM partition)". I dont know whether its a ubuntu partition. And there is no option to delete it also. No other ubuntu partition. I want to remove the ubuntu boot option from my os list. How to do it?
View 2 Replies
View Related
Sep 13, 2013
If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?
View 1 Replies
View Related
Aug 31, 2013
I had a computer with windows 7 home premium x64. A while ago I decided that I wanted to up grade to windows 8 and so I partitioned my os drive and installed (OEM) windows 8 Pro on the new partition. During the set up I was able to set up a duel boot system with windows 8 and windows 7. When I look at the drive structure I noticed that there isn't a system recovery partition for windows 7 or windows 8.
I would like to generate a system recovery partition for windows 8 and remove windows 7 but I am not sure how to go about doing this.
View 4 Replies
View Related
Oct 7, 2013
I am running Windows 8 x64 without secure boot enabled. According to the screen shot
secure boot is "Unsupported" but my motherboard has secure boot features in it. Its just that I didn't have secure boot enabled when I installed Windows 8 so Windows is unable to use secure boot now. What are the steps for setting up my computer for installing windows in secure boot mode ?
Pc Specs-:
Motherboard: Gigabyte H77m-D3H (rev 1.1)GIGABYTE - Motherboard - Socket 1155 - GA-H77M-D3H (rev. 1.1)
BIOS ver: F11 (Latest)
Ram:8 Gb DDR3 Corsair
HardDisk-: 1) Western Digital 160 GB (boot) 2) Western Digital 1 TB.
I had mailed Gigabyte support on how to enable secure boot they told me the following-:
"We suggest you can first back up data, reset BIOS items we mentioned in first mail, format your HDD into GPT partition and then reinstall Genuine Windows 8 to test again."
So I am asking how can I format my HDD into a GPT ? Is there anything else I need to before I install Windows 8 again ?? What are the exact steps to follow.
Also, there are two things is there any app available via which I can backup my entire C drive including Program Files, all my installed apps, and all of my hotfixes and Windows updates ?? Because I don't want to reinstall everything again and again update my Windows 8.
View 9 Replies
View Related
Mar 2, 2014
I recently tried the "sfc /scannow" command. It said it fixed corruptions and after a restart a "Windows 8.1 Pro" watermark showed. I tried to remove it using the My_WCP_Watermark_Editor.exe app. However, it gave me errors in various Modern Apps like the Windows Store app wherein it would crash whenever I type something in the search bar. I did the "sfc /scannow" command again and it fixed the Modern Apps errors but the watermark appeared again. How to remove this watermark it is very annoying. Don't tell me to activate my Windows because it is already activated. I can use the Personalization settings in the start screen.
It added the "Test Mode" and the "Build 9600" because I accidentally clicked the apply settings the first time opening the app. There must be some way to remove the annoying watermark...
View 9 Replies
View Related
Aug 13, 2013
Capture.JPG I want to remove watermark. Have any people know that.
View 9 Replies
View Related
Aug 30, 2012
I have to run with driver signature enforcement turned off permanently as I use an AMD switchable graphics laptop, and it is not supported by AMD and am forced to run usermade drivers with no signature. How can I remove this watermark without messing with Windows version displayed in winver?
To add to this, I used MyWCPWatermark to remove the Test Mode text after I activated. Now I am activated with the Windows version and build number text still on the bottom right of the screen. I can't use MyWCP anymore, it just asks if I am on Windows 8 beta.
View 7 Replies
View Related
Oct 19, 2013
I just upgraded my legal copy of Windows 8 to Windows 8.1. I've also installed all the currently available updates. The problem I'm faced now is the watermark on my wallpaper near the clock (Bottom-right side of the desktop). It currently says: "Windows 8.1 SecureBoot isn't configured corrently Build 9600" .
I have to admit, I have disabled secure boot. I don't know if I'm allowed to talk about this in these forums, but let's just say I have another OS installed an my PC (I use GRUB to load the two Operating Systems)...
View 9 Replies
View Related
Aug 23, 2013
How to remove watermark complete in 8.1 Build 9477 .
View 5 Replies
View Related
Mar 1, 2014
How can I remove the Windows 8.1 Enterprise Watermark on my laptop?
On the right bottom side this is what Windows 8.1 says.
"Windows 8.1 Enterprise Evaluation Windows License Valid for 90 days Build 9600"
I run Windows 8.1 Enterprise 64 bits.
View 9 Replies
View Related
Apr 8, 2014
I finally found out a way to access the Test Mode in Windows 8.1 Pro Update 1 to get unsigned drivers to work, but the side-effect is there is a watermark, which can be removed if you disable the Test Mode. I want the Test Mode to stay enabled, but the watermark gone!
View 5 Replies
View Related
Mar 30, 2014
i have problems removing watermark for W8 pro build 9600.
It seems like i cant find patched files to replace original ones.
Looking for correct files for this version.
if there are any edited files, will it also work on build 9200 ?
View 5 Replies
View Related
Dec 30, 2013
I was prompted by my OS last week to install 8.1 because it was gonna be "great!" so I did and on reboot, was greeted with a bsod. My computer dude said that it was time for a reinstall, so that's what I did during the course of the day. It's a fresh install, fully updated (8.1). I have three drives attached; two 500 GB disks and a 250GB. The computer is seeing one of the 500GB and the 250GB disks properly, but the other 500GB is only showing one partition it seems. It's labeled system reserve and is 350MB in size.
My virtual machines are housed on the other partition and I could really use them. How do I get the Windows install to allow me access to the whole drive?
View 5 Replies
View Related
Feb 4, 2014
I'm finding that I am unable to disable secure boot. I can change the boot mode from UEFI to Legacy BIOS and that disables secure boot, but in Legacy mode I can't do what I'm trying to. I can't select the Secure Boot menu in the BIOS options--it's always greyed out. I've done some research and some sources said to hold shift while shutting down "to ensure you're really stopping Windows before trying to enter the BIOS" and hitting F2 on startup. I tried that but it made no difference. I've tried fiddling around with getting to the BIOS in other ways (forgotten how, now) and of course that made no difference.
I'm running Windows 8.1 on a Acer Aspire V-3551 that came with Windows 8 preinstalled.
View 5 Replies
View Related
Oct 30, 2012
I did the Upgrade Assistant from Win7 pro to 8 pro and this is what I was told:
Secure Boot isn't compatible with your PC
Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
More info, I really want Secure boot, however. I have a UEFI BIOS. I am willing to upgrade or clean install, as I will never use the previous windows 7 version again. Is there a way to get Secure boot with my computer [when I upgrade to 8]?
Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database. How do I get this?
View 9 Replies
View Related
Jun 22, 2014
I have a new laptop (HP G7-2292NR) with Windows 8 and today I turned on the laptop for the 3rd time and I see in the bottom right corner Windows 8.1 Secure boot isn't configured correctly build 9600, what does that mean? I am so new to Window 8 that I cannot find a thing, I need specific instructions. This is a huge change given I went from XP to Windows 8.
View 9 Replies
View Related
Aug 14, 2014
My PC started off on Win 8 and I upgraded to Win 8.1 .
I want to do a completely fresh installation. I do not mind going back to Win 8 and redownloading Win 8.1 afterwards.
My problem is that when I go to PC Settings > "Remove everything and reinstall Windows", I get the error: "Insert media. Some files are missing. Your Windows installation or recovery media will provide these files."
I have a partition on my computer "HP_RECOVERY (F:)". It states 1.24 GB free of 10.6 GB. When I open it, it contains a folder called "Recovery" and "HP_WSD.dat" -- the .dat file is 1 KB. When I open the folder, it says that it is empty (hidden folders and files are set to be shown). If I look at the folder properties, it states that it contains 1 file, 2 folders. The size is 69 bytes.
I have not touched this recovery partition ever since I got this PC. I have, however, run a partition software before because I split my (C:) into (C: and D:). I do not know if this may have somehow corrupted my recovery partition.
What is the best way for me to quickly and cleanly format my PC without losing my registration key? I do not have a copy of Win 8 or Win 8.1 on a CD or USB.
I opened up cmd as admin and typed in "reagentc /info" and it output this:
Code: C:WINDOWSsystem32>reagentc /info Windows Recovery Environment (Windows RE) and system reset configurationInformation: Windows RE status: Enabled Windows RE location: ?GLOBALROOTdeviceharddisk0partition3RecoveryWindowsRE Boot Configuration Data (BCD) identifier: 8fc8db37-7d80-11e3-91ec-faa553f3f5b4 Recovery image location: Recovery image index: 0 Custom image location: Custom image index: 0REAGENTC.EXE: Operation Successful.
View 2 Replies
View Related
Aug 9, 2013
I bought a new laptop which came with Windows 8 pre-installed. The standard version - not the PRO and therefore not downgradable :-( I bought a Windows 7 CD and tried to install it, but the installation failed. Frozen screen - don't ask me the details: I am useless. Now when I power up the laptop, just after the boot begins, I get a screen asking me to chose between "Setup" and Windows 8, with "Setup" being highlighted and which launches automatically if I don't manually change to Windows 8, which systematically leads to the frozen screen and I have to power off manually. If I choose Windows 8, then it finishes the boot and launches normally. Since, I have discovered Start8 and it works for me, so I am happy to keep Windows 8, but I'd like to get rid of the partial Windows 7 installation and the boot problem it causes.
View 1 Replies
View Related
Feb 2, 2014
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)
And several other external disks which don't deserve mention today.
View 1 Replies
View Related
