I've used multiple usb hook-ups so I know its not a bad cable. I've tried searching for the device/ adding it manually nothing will work. I've also tried using different USB ports, no luck.
View 6 RepliesOk after recently installing 8.1 and installing Kies 3 for my S3 Ive been checking my event viewer and seeing the below error consistantly , googled it but no real joy.
The device GT-I9300 (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 5 more times in its own process. Please contact the device manufacturer for more information about this problem.
Ive checked the drivers uninstalled and reinstalled removed kies 3 and reinstalled but still showing.
When i try to connect my samsung galaxy s3 to my pc via USB, it simply works the first time. But when i remove my s3 for like one hour (or more...) and i try to connect it again, Windows 8 wont recognize my s3. but then, when i restart my pc and i try to connect it again, it works...
View 9 Replies View RelatedMy windows 8 laptop will not connect to the wifi hotspot of my samsung galaxy s3. My windows 7 laptop connects just fine & the windows 8 laptop connects to my broadband router ok so it doesnt seem to be a physical problem.
View 2 Replies View RelatedI just downloaded Kies 3 to my new Laptop, which is a Toshiba using Win 8.1.
Tried to run it, but got an error
The error said
Kies 3 Ordinal Not Found
The ordinal 12148 could not be located in the Dynamic Link Library C:ProgramFiles(X86)SamsungKies3Kies3.exe
Kies 3 was downloaded from the Samsung Site.
Recently I've loaded windows 8 pro 64 bit in my netbook; after that I've installed my Samsung Galaxy Y PC Suite (Samsung Kies - already updated). When I go to Phone & Modem in control panel, under the modem my phone is not showing.. My windows 7 PC getting this modem. Earlier I'd loaded win 8 32 bit version, which was detected my samsung modem. My asus netbook supporting windows 8 64 bit, all the drivers are compitable with that..
View 3 Replies View RelatedIs there any way I can output the content of my samsung galaxy note 2 to my dell inspiron 7520 laptop via hdmi or vga socket? From my research I found that only the alienware laptops have hdmi input.
View 2 Replies View RelatedI can pair my Galaxy S3 with my laptop but when it does the status in devices shows offline. I can't seem to get past that. My S3 connects fine with my Jambox, so I know it can connect.
View 9 Replies View RelatedWhenever I insert any Cd or DVD to my drive i get "Please enter a disc to H:/" ... I also tried Microsoft Troubleshooter but it didn't worked. My computer not even detect my CD.
View 5 Replies View RelatedWhenever I try to connect my flash drive, phone or digi cams. It can't detect anything then I saw this in device manager, is this the culprit?
View 1 Replies View RelatedWhen attempting to install Creative drivers for X-Fi cards you may receive this message:
"unable to detect supported product"
and of course that's as far as you get.
To resolve this issue:
1. Uninstall the current drivers.
2. Shutdown and power off. Physically remove the audio card.
3. VERY IMPORTANT STEP: Boot at least once with the audio card removed.
4. Shutdown and power off. Re-install audio card.
5. Bootup. Re-install drivers.
I have a Dell Inspiron 3521 with a DVD RW drive listed as "HL-DT-ST DVD+-RW GU70N" and I use Ashampoo Burning Studio 14. When I tried to burn a Video DVD after DVD authoring I get a warning saying "The inserted CD/DVD could not be detected". I tried other software too. They don't seem to detect the DVD too.
View 2 Replies View RelatedI tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
I have a samsung galaxy s3 plugged into a front usb slot on my cyberpower pc, running windows 8. For charging. My previous computer never had any issues but this one (which is brand new) is having a lot of annoying problems with it.
It has no issue detecting the phone, but any time I touch the phone while it's plugged in. The computer will repeatedly (7-10 times) play the dismounting hardware sound. Followed by several mounting sounds. Over and over for a little while.
I thought maybe it was a connection problem with the cord. But it happens without any interference with the cord. All I have to do is press any button on the phone once and it will mount and unmount the phone obsessively. Which will also open and close the folder for the phone's files, interrupting everything I'm doing at the time.
how I get Samsung LC27A750XS USB display drivers (win7x64) to work on a Samsung NP900X1b with the Windows 8 CP installed?
The drivers won't start at all. The built in USB3.0 hub is recognized and working flawlessly, but the USB display driver continues to report it can't be initiated as there's reg keys missing.
I've reinstalled the win7x64 drivers over the Windows 8 defaults but nothing is resolving. I'm trying to use either for extended viewing or as the primary display while at my desk.
I got a samsung np700 get two bleeps when opening programs and on boot up.
Turned of windows default sounds did not work ....
Turned off bleep warnings in the registry, but stuck with two bleeps on boot up, i thought startup one bleep was normal but the store says two bleeps are ok.
Just wanted confirmation from another user that 2 bleeps are normal with samsung as the store did not seem too confident.
[No error messages, pc running ok, sfc & chkdsk ok, devicemanager list ok] ....
I'm not sure when this problem started happening, but recently, when I plug in or unplug the power of my Galaxy S4, the computer will wake from sleep. I'm running CyanogenMod 11 on it, which is based on Android 4.4.2. I haven't installed or configured any apps on my PC to allow for this, nor any apps on the phone. How I can stop it?
View 5 Replies View RelatedI have to galaxy s2 one of of the can't connect to the pc and the other one can. The one which dosn't connect a messege pops up ( the last device you connected to this computer malfunctioned and windows dosen't recognize it.
View 2 Replies View RelatedI have the laptop as stated above, i have had it a week and the user before me had decided to put on 7 instead of 8. i completely wiped and restored to windows 8.1, installed all sammy drivers and ensured it is all up to date.
the laptop had huge instability issues, the hdd was on its way out as mbr was damaged and the heads were ticking badly. then i found the ram was not secured in the sockets properly too. so i fixed it all!
Anyways back to the problem. i have the realtek hd audio drivers installed from sammy, reinstalled the ones from realtek themselves and still nothing.
Main issue, mic and speakers built in work and are fully detected. but the microphone port and headphone port are not detected, no matter what i plug into them.
So recently my windows 7's some system files got corrupt . won't start after windows logo (when the arrow shows up=>always bsod, even in safemode). so I decided to format C and install fresh windows 8.
Then I had four partitions C:windows(7) D:Softwares E:Games F:Mix Stuff.
My plan was to format C (of course for windows 8) and D (as C had only 20Gb space so I thought I would also format D 46Gb and give C 45Gb and D 20-21Gb as it was useless to me and contained only a bunch of crappy softwares ). Well, it FAILED here's how. after formatting C and D I deleted them thinking that boths unallocated space will merge. but it DID'NT.
After deleting I tried creating new partition on D but it FAILED "we cannot create create new partition" . Then I did same thing with C and it WORKED. I had to give it again 20Gb (maximum) - NO CHOICE. Then I installed Windows 8 on C. (thinking I will later format D on desktop)
Now here's the scenario : I DO NOT WANT TO FORMAT E: AND F: AS IT CONTAINS MY PRECIOUS DATA. After the startup config, 'Startup' came up I went to Desktop then Computer and then what????
WHERE THE HELL ARE OTHER PARTITIONS????????
Only C: I found there 7.67Gb free of 19.5GB.
Where are others gone .
I went to disk management and saw only (C:) other 138Gb (something) was unallocated space. Then I booted my pc from windows installation usb and on the drive screen I saw C 19.5-20Gb and Unallocated space 138Gb.
Recently, I got a new graphics card for my computer (the card was Galaxy NVIDA GEForce 620). Well, after install some things changed that I do not like:
I can no longer sleep my computer. The #1 thing I liked about Windows 8 was getting to sleep the computer/ wake it up real fast. After I put this card in, the only options I get are Reboot and Shutdown. (And I even had to turn fast startup off, because when I start the computer up with it on, my USB's loose their functionality).
Everything was ok with sound but now the computer doesn't detect any sound devices like amplifier, headphones, speakers, etc. The computer does find the audio card, but not devices.
View 8 Replies View RelatedEver since the latest WP update (currently on WP8.1 Update, firmware 3051.50009.1424.0003) my Windows 8.1 PC doesn't detect my Lumia. I get "The latest device malfunctioned and Windows does not recognize it. There is also Unknown USB device (Device descriptor request failed) listed under Universal Serial Bus controllers in Device manager. Nothing under Portable devices section.
What I have tried:
- replacing usb cable (using original one) -> no luck
- soft reset phone -> no luck
- turning the phone off and plug it in -> no go
- manually uninstalling the device from device manager, restarting the PC and try again -> nope
- plugged brother's lumia 930 -> works like a charm
I've got access to laptop, plugging my phone there and the same problem happens at first - the device can't be recognized but a few moments later somehow it gets recognized and connected. The problem seems to be on my PC, need to completely removing all the Phone drivers (including registry entries) so I can install them fresh?
I've recently encrypted my main drive, and all is well. However, I would like to be able to encrypt one of my data drives as well and bitlocker isn't even detecting the drive's existence under "Fixed Drives"
I'm on windows 8.1 machine, the encrypted main drive is a SSD drive, and the data drive is a regular WD spinning drive SATA drive. I would like to have the WD data drive encrypted as well...
I am using Windows 8.1x64 in UEFI mode. My motherboard is Gigabyte H77M-D3H. My hard disk is configured to use AHCI. A few days back I needed to use system restore from my repair disk because of a system crash. To my horror when I selected System Restore from my Windows repair disk it showed-:
"To use System Restore, you must specify which Windows Installation to restore. Restart this computer select an operating system, and then select system restore."
Now I don't have multiple Windows installations but I do have Debian Linux x64 dual booted with Windows 8.1. the Debian Linux also boots in UEFI mode. Is this problem caused by the fact that I am dual booting ? Has Linux dual booted, check if you can system restore from the windows repair disk.
I can perform a system restore from the inside of the OS fine. But I need it working from the outside also. What I have tried is running diskpart from the repair disk and selecting my partition on which Windows is installed and then running system restore but this had no effect. Can I boot up windows and then select to boot from my CD ? Like, before Windows completes booting I can have the repair disk boot up or something. Could it be that I am booting my CD in legacy rather than UEFI ?
PS-: My Windows 8 was upgraded from an installation of Windows 7. But I have already deleted the Windows.old folder in C drive.
For some reason Windows allows me to install Hotfixes that date back to August and even July! I know I installed those Hotfixes for a fact, but some recent updates reset all that. How to get the latest versions of everything at this point?
View 5 Replies View RelatedHaving Internet connection issues--sometimes I can connect, but only get "2 bars," other times nothing. I am using a wireless router, and have another computer connected to it, and I get the internet with no problems on the other one. Couldn't download TSG SysInfo on computer with problem.
Microsoft Windows 8.1 Home Premium
Dell All-In-One Desktop Computer
Intel Core i3-3240T CPU @2,90GHz 2.90 GHz
4 installed RAM
64-bit operating system, x64-based processor
Antivirus: avast! Antivirus, Updated and Enabled
Steps I have taken: Troubleshooted connection, and received the following error: windows could not automatically detect network's proxy settings. Ran "network troubleshooter" and I think it reset the connection and said all was fine.
So I'm trying to run dual OS on my new windows 8 machine. I made a bootable Ubuntu 14.04 usb stick using Rufus, disabled secure boot and proceeded in attempting to install the system. However, (settings->general->advanced startup->use a device) won't detect my bootable USB. It won't boot from it at startup either, no matter how much I fiddle with the UEFI settings.
Well, I guess that is not entirely true, as I managed to get it to boot and install ubuntu after switching the UEFI boot settings to legacy boot. But windows 8 does not work under that option, so I'm having to go and change the UEFI boot setting every time I wish to use a different OS.
At random, Windows would refuse to shut down, although it would cancel out the display. Hitting the power button it would bring the PC back to life in a state half in shutdown and half alive. Upon restart, Windows will refuse to detect my LAN driver. It wouldn't even show up on the device manager (not even as an unknown device).
I have Gigabyte G1 Assassin motherboard with BigFoot Network LAN card. To make the LAN work again, I have to delete the Big Killer Network software from my PC and re-install it again. But after two days, Windows will do the same thing all over again.
System Rig:
Intel Core i7 processor
4GB of RAM
GTX 580
Here's the scenario...PC crashed, I get Toshiba splash screen at start up then nothing. With recovery stick I can get tools but cannot use them... I get either missing partition or hard drive locked message. I can get to command prompt though where it appears that the partition containing Windows is not being recognized at all...the size of the partition is not even showing up. This all started when I returned to my PC to find it unresponsive and had to power it off with the power button. PC was working fine for months after upgrading from Windows 7.
View 4 Replies View RelatedI have recently upgraded from Vista to Windows 8 online Apart from the backup disc not working it won't play dvds - in fact it won't even recognise that a dvd is in the drive. Having read much about the decision by Microsoft to withdraw support for dvd playback I have now installed both Windows Media Centre (via the free download/product key) and VLC player. However neither of these programmes will play nor recognise a dvd in the drive. Windows Media Centre reports
"WMC cannot detect a video dvd in the DVD-Rom drive. Insert a video DVD into the drive"
I have tried many dvds, all of which have been played by this system when Vista was the running OS. The dvd drive is recognised in Computer as "BD-RE Drive (G" and this moniker does not change when a dvd is inserted. Autoplay options never appear. When a cd is inserted to the drive the name of the dvd drive remains the same but "audio cd" appears after and the cd plays fine. In device manager the dvd drive appears as a
MATSHITA BD-MLT UJ-220S ATA device
the drive "thinks" it's just a cd drive? Is that possible? I have uninstalled the drive and rebooted to re-install it with no effect on this problem. I've also tried the registry edit
"reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 000000001"