Hardware Drivers :: Samsung Series 9 With Central Station 27 USB Display - Unable To Work?
Mar 18, 2012
how I get Samsung LC27A750XS USB display drivers (win7x64) to work on a Samsung NP900X1b with the Windows 8 CP installed?
The drivers won't start at all. The built in USB3.0 hub is recognized and working flawlessly, but the USB display driver continues to report it can't be initiated as there's reg keys missing.
I've reinstalled the win7x64 drivers over the Windows 8 defaults but nothing is resolving. I'm trying to use either for extended viewing or as the primary display while at my desk.
View 3 Replies
ADVERTISEMENT
Jul 14, 2013
I recently upgraded my Samsung Series 7 Ultra to the Windows 8.1 preview to check out it's new offerings. It's ok I suppose. Some positives and some negatives. Anyway on to my point:
So with the update came some unwanted changes. It seems to have disabled most of my func keys on the top row of my keyboard. Also, it now no longer saves my touchpad settings. They are reset to default everytime the system is rebooted.
I'm guessing this has to do with the Samsung software that controls these features not yet upated or ready to run on 8.1.
View 9 Replies
View Related
Jan 28, 2013
I have a Samsung Series 5 Ultra Touch. The other day, for reasons unknown, it would start up into the auto repair process. It would "diagnose PC" then "repairing", warning that might take a long time. Well after 24 hours I figured this was a dead end.
I have been through a crazy number of troubleshooting steps
--couldn't get into any F8 or Shift=F8 action
--Samsung's Restore mode crashed (F4)
--Made a recovery USB and figured out the magical BIOS steps that would actually allow me to use it after much trial and error)
The recovery process has yielded no joy.
--System Restore crashed
--Automatic Repair was never ending
--System Refresh said the drive was locked
So I started using DOS commands. Chkdsk seems to be taking forever to accomplish very little. See the screenshot:
Should I let it continue with chkdsk /f /r /x?
View 5 Replies
View Related
Aug 25, 2014
I have a Samsung NP9000 model NP900X4C-A05AU. It regularly crashes due to full memory. It has 8G of RAM, running Windows 8.1. It's done this since day 1 - I managed to remove some Samsung bloatware that mitigated the problem somewhat, i.e. from once a day to three times a week. Mostly, just before it happens I get the "close some programs or lose some data" message, and I can possibly kill something (chrome usually) to free some memory so I can reboot cleanly. Usually at this point, the "Modified" section of the Task Manager Memory usage tab is quite big. Reboot and it's good for another couple of days.
Sometimes the "close some programs" message is too late... I get the message and almost immediately Windows crashes and reboots. Up until last week, this didn't cause any issues after the reboot. But last week, it did this, gave me the message and immediately crashed. It took about 1 hour for it to reboot, sitting at the "please wait" dots. I was in the process of making a recovery USB to boot from when it finally came to life. Everything seemed ok, was able to start things up, and carried on as usual. Couple of days later, get the "close some programs" message, and am able to reboot. But the laptop takes 5 to 10 minutes to reboot. Up until I had this issue, a reboot would take 5 to 10 seconds (to get to the login prompt). Even a reboot after just rebooting takes 5 to 10 minutes. I've run scans on my SSD, it says everything is ok. Every reboot now takes 5 to 10 minutes.
View 3 Replies
View Related
Jan 16, 2014
So I downloaded the ISO and burned it via unetbootin. I go into bios and change the following settings: disable fast boot, and make the OS selection CMS make USB boot first Then when i boot, it just boots back to windows 8. I also noticed that once I reboot back into bios, the USB is not set to first boot as I set it initially.
By the way I have a Samsung Series 7 Chronos with nividia graphics.
View 2 Replies
View Related
Sep 13, 2014
I'm in program trying to remove the canon MP495 series MP Driver and it will not remove. A window says that the printer is in use by someone. The printer in question is completely turned off. I've shut the computer off and restarted it and it is still there. What now? I was trying to remove a virus and it had programs running to close them first. This is why I had to run recovery to clear it.
View 1 Replies
View Related
Sep 5, 2013
Wondering if the OS Optimization for Samsung SSD work in Samsung Magician software.
View 5 Replies
View Related
Aug 7, 2014
Ever since i upgraded my storage to a Samung 840 SSD windows 8 explorer is failing to work as expected. When i select the computer folder it displays 'The folder is empty'. This happens all the time.
My best guess its SSD compatibility? Firmware is all up to date etc.
View 4 Replies
View Related
Sep 19, 2013
Recently I've loaded windows 8 pro 64 bit in my netbook; after that I've installed my Samsung Galaxy Y PC Suite (Samsung Kies - already updated). When I go to Phone & Modem in control panel, under the modem my phone is not showing.. My windows 7 PC getting this modem. Earlier I'd loaded win 8 32 bit version, which was detected my samsung modem. My asus netbook supporting windows 8 64 bit, all the drivers are compitable with that..
View 3 Replies
View Related
Feb 20, 2013
I just wanted to know if it was possible to use Intel Mobile 4 Series Express Chipset drivers with Windows 8. I've read that you could use the drivers for Windows 7 in Windows 8, but I haven't really proven that to be true.
I keep getting this error:
but I really don't get why I'm getting that message - it's giving me this message like I'm trying to run the software on a computer from the '90s. It really doesn't make sense to me since just about all other software can run on newer operating systems.
All I want to know is if it's possible to install these drivers on my computer, and if not, if there's a patch or a substitute.
View 2 Replies
View Related
Jul 16, 2012
I have been trying to find our when intel will release drivers for the Mobile Intel(R) 4 Series Express Chipset Family on windows 8. I can not play many games without them.
View 3 Replies
View Related
May 5, 2014
I have a samsung laptop and 4 days ago the internet access stopped working. I normally use it via wireless and I have tried it hardwired - no luck. I have restored the internet settings. The response I get when trying to connect to google is 'waiting for google.com' and it just hangs.
View 3 Replies
View Related
Mar 6, 2014
I actually installed the Android on Intel Architecture onto my Samsung xe700t a few times over the last few months, adjusting windows 8 or android options to suit my needs, but a few days ago I decided to format my laptop and reinstall Windows 8 and reinstall Android as I have previously, I am now getting this error message at the very end of the android installation process:
fatal: assertion failed bootable/iago/plugins/gummiboot.c:gummiboot_execute:154 'efibootmgr encountered an error (status 100) root@android:/#
I have updated the bios, I have made sure my laptop is in UEFI format, I have made secure the BIOS isn't in secure boot, I have tried various USB sticks, I have also made sure the USB stick is first in the boot order.
So why I can't install Intel Android onto my pc anymore ...
View 8 Replies
View Related
Feb 18, 2014
Windows update has been really messing with my pc lately. I ran update and when it installed the updates my integrated mouse ended up not working. I rolled back update and installed the updates one by one and the one I ended up not installing was the camera codec pack. Now the problem I am having is that my touchscreen won't work. If I talk to HP support they do the most basic thing they can and then when they can't fix it they tell me that I have to ship it to them because hardware is broken.
View 1 Replies
View Related
Mar 3, 2014
Running Windows 8.1. Have admittedly modified it quite heavily but what I have screwed up.
Pretty much, any apps which have the purple wheel splash screen do not load (presumably crash). Normal windows settings work fine. Windows applications and Metro apps works with no hitches (I have none downloaded but default Music, Games all start with no issues).
View 3 Replies
View Related
Oct 25, 2013
Last night I got hold of a 27" BenQ GL2750HM, so far so good. I have my main display from the DVI port to HDMI port on the screen and my secondary screen is my 60" TV which is connected through HDMI port on the graphic card into the HDMI port in my reciever.
The main scheme for my setup is like:
- Radeon 7970 DVI > HDMI Main monitor (BenQ GL2750)
- Radeon 7970 HDMI > HDMI Reciever (ONKYO TX-NR609)
- ONKYO TX-NR609 > 60" TV
So to the problem now. When the HDMI cable is connected to the graphic card, I need to have my TV ON in order for my main monitor, the BenQ, to work and if I turn off the TV the BenQ is getting black, like a standby mode, however, there is "no signal" to the monitor.
This was never a problem with my other screen, I could have the HDMI cable connected to the graphic card, the TV off and the reciever OFF without the main monitor went black.
View 5 Replies
View Related
Jul 11, 2014
I'm having problem with my Windows 8.1 x64.
Currently i can't view my hidden files because the check box for Hidden Items always stayed untick whenever i click it.
View 1 Replies
View Related
Apr 26, 2014
Just replaced my OS (Win 8.1) Drive, and was planning on using the old drive as a back up.
This new (and old) drive have just the OS, all my programs and media etc are on other drives.
Can I put my old OS drive, with Windows 8.1 still installed, into a USB Docking Station, and use it as a back up boot drive. In other words will this drive boot from the Docking Station if I keep it up to date (Copy Disk regularly) in case of internal hard drive failure?
View 9 Replies
View Related
Apr 21, 2013
I have touchpad laptop. once 2 apps are established the apps(very) frequently switch by very slight touchpad arrow mpvement in central part of screen 1-is this normal?(I find it infuriating) 2-can be eliminated? (ie..restrict switch behavior to edge movements)
View 3 Replies
View Related
Jul 8, 2014
the " toshiba service station " recommended an update called " bios update version 1.50 for qosmio x70/75 " and they said it is recommended so i did download and he said dont remove the cord or anything so i did that and installed it and everything was going smoothly but when he finished the update and was restarting it shut down and didnt boot up again. whenever i click the power button the keyboards and power button lits up for a second and then the laptop shuts down it is windows 8 and it does not boot up for me to go into the bios menu
View 8 Replies
View Related
Oct 10, 2013
I know how to select the second screen options, however, my Surface Pro and our Samsung Laptop both running Windows 8 cannot detect a second monitor/screen. We are connecting via the HDMI port, but it will not display no matter what option we choose nor whether we run it from the desktop or apps. This is what we use for work to display presentations for clients.
View 3 Replies
View Related
Dec 23, 2012
I recently upgraded my new XPS 13 (L321X) to windows 8. Webcam central stopped working, It is getting detected in device manager. I tried installing the drivers again from dell site without any result. Whenever I open webcam it says close the other streaming video application to start video though I don't see any other video application going on in my system.
View 13 Replies
View Related
Jun 28, 2013
I tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
View 2 Replies
View Related
Jan 14, 2013
I've used multiple usb hook-ups so I know its not a bad cable. I've tried searching for the device/ adding it manually nothing will work. I've also tried using different USB ports, no luck.
View 6 Replies
View Related
Jul 14, 2013
I am unable to change any permission for any folder . every option that supposed to be available for setting the permission is gray out!! , for some of my files I see the owner is "unable to display the current owner". The problem is the same for every single folder and file. I checked other systems (friends laptops and desktops) and they are working just fine ! but I am just unable to modify any permission for any folder or file !! even I tried to change the owner but it didn't worked !
View 2 Replies
View Related
Apr 13, 2013
i am using an inspiron 14 with windows 8 single language (US English).
i recently downloaded a chinese music player from www.duomi.com and windows 8 is only displaying part of the chinese wordings in the software correctly, the rest are like alien characters.
image: [URL]...
What should I do?
View 2 Replies
View Related
Jan 18, 2014
I have a samsung galaxy s3 plugged into a front usb slot on my cyberpower pc, running windows 8. For charging. My previous computer never had any issues but this one (which is brand new) is having a lot of annoying problems with it.
It has no issue detecting the phone, but any time I touch the phone while it's plugged in. The computer will repeatedly (7-10 times) play the dismounting hardware sound. Followed by several mounting sounds. Over and over for a little while.
I thought maybe it was a connection problem with the cord. But it happens without any interference with the cord. All I have to do is press any button on the phone once and it will mount and unmount the phone obsessively. Which will also open and close the folder for the phone's files, interrupting everything I'm doing at the time.
View 1 Replies
View Related
Jan 29, 2013
I tried a clean install on my system which has a Gainward GT430 (nVidia GT430) 1GB display adapter. What happens is that soon after booting from the DVD the display becomes corrupted (blurred and difficult to read) and I can only barely make on what's on the screen and proceed with the installation.
After the point where I format my drive, windows looks like its installing but after the reboot the display goes to sleep, and I have to start over.
On the same system installing Windows 7 had no issues whatsoever. Installed fine with nearly all the drivers available natively to windows. I was installing Windows 8 64 bit using original media.
View 6 Replies
View Related
Jan 20, 2014
Ok after recently installing 8.1 and installing Kies 3 for my S3 Ive been checking my event viewer and seeing the below error consistantly , googled it but no real joy.
The device GT-I9300 (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 5 more times in its own process. Please contact the device manufacturer for more information about this problem.
Ive checked the drivers uninstalled and reinstalled removed kies 3 and reinstalled but still showing.
View 9 Replies
View Related
Feb 20, 2013
I got a samsung np700 get two bleeps when opening programs and on boot up.
Turned of windows default sounds did not work ....
Turned off bleep warnings in the registry, but stuck with two bleeps on boot up, i thought startup one bleep was normal but the store says two bleeps are ok.
Just wanted confirmation from another user that 2 bleeps are normal with samsung as the store did not seem too confident.
[No error messages, pc running ok, sfc & chkdsk ok, devicemanager list ok] ....
View 9 Replies
View Related
Jun 3, 2014
Had drive problems with PC so got new SSD drives and a Hybrid drive.All new drives so did tortuous route install win7 - upgrade to win 8.0 all worked then started acting up. My tech support worked on it for 2 days and gave up said I should backup and do a clean install from start. So I did.
Not yet put any backup files on so only operating system and devices (printer, wireless keyboard/mouse, wireless headset and 3webcams ( One Pluscom and two PCline ) checked device manager and found cameras with yellow exclamation mark and checked properties and saw this webcam.JPG . Download, install and do a reboot and see what happens.
[URL]
I am obviously logged in as admin as I am the only user who Can use PC and checked permissions which are OK all users having full access.
View 6 Replies
View Related
