Since I have upgraded to 8.1 my remote control no longer works it is detected in device manager and driver is installed but when I click skip,play, stop etc nothing happens. I use it mainly for my music.
Is there a way to get it working again. I use the default music app to play music which I preferred the old version to be honest.
After upgrading to 8.1 all of my previously listed devices are no longer listed under devices... in fact there are no devices listed. I can also not add a device. If I look in device manager they are listed there and if I go to print the printer shows up and I can print. The screenshot below shows what I see when I open "Devices and Printers" in control panel. The biggest issue is not being able to add devices like Bluetooth speaker.
View 6 Replies View RelatedHp G60-228CA Notebook laptop
Originally came with windows vista 32-bit, so recently I upgraded to windows 8.1 32 bit after about a month the track pad and keyboard BOTH came un-responsive, and in the device manager, it's coming up with a "COPROCESSOR" error.
I recently switched my pc from 2 AMD cards to 2 Nvidia cards, when i was preparing to install the 2 cards, i shut down my computer, during the shutdown it asked me to update and shutdown win 8 which i did. ever since i did that my audio devices are not detecting.. nothing i do is working.
When i use my plug and play speakers, they are not recognized... let me rephrase.. in the playback devices menu they show up as "Speakers" as they always have, then quickly disappear, then show up again, then disappear again, then back and forth over and over and over again..... i tried uninstalling my audio drivers and reinstalling. this did not work. i can get sound with the speakers, by just pluggin them into my TV, but i cant control the audio or the 5.1 surround from the tv, it just shows them as stereo...
Asus Sabretooh 990 fx R2
AMD 4.3 vishera FX 8 core
GTX 780Ti (primary)
GTX 480 Superclocked (dedicated physx)
850 modular psu
16GB GDDR3 g.skill
i never had this problem until A) new cards, and B) installed the win 8 update... But i rolled my computer back to a date before that update, and then turned updates off in case that was it..
i've also tried installing drivers directly from realtek, directly from my motherboard website. i've uninstalled and reinstalled, and stopped windows from auto installing during my realtek installs on the drivers...
just cant figure out why it flickers like that, the speakers work fine in other devices (e.g the tv).
Here is a screenshot of when i try to download drivers, i get an error 0xE0000247....
And a pic of my device manger
I'm looking for a Metro app that would allow me to remote control a music software program residing on the Win 8 desktop machine. I'm not looking for a music app that will stream music residing on the PC, just a remote control (via wifi home network), preferably for foobar2000 as it's my main player of choice. There are heaps of apps like this on the android platform and iOS and I'm guessing this is the first hurdle i've come across with the Windows Store.
View 2 Replies View RelatedI recently upgraded my HP Touchsmart IQ500 from Vista Home Premium to Windows 8 Pro. Aside from the lack of a media center or otherwise out-of-the-box-inability for DVD playback I've been enjoying the change. I solved the DVD problem with VLC, but I cannot figure out how to get my microphone to work now. It was fine before the upgrade, and now there's just silence when trying to Skype or record otherwise.
updating the drivers in the Device Manager which I have tried, only to get a message that reads:
Windows has determined the driver software for your device is up to date.
My computer is a bit like the car; turn either of them on, and expect it to do its 'thing' but when it doesn't.... stuck!
My windows 8 library is not working...
Anyway, I've researched how to delete and then reinstall/program. What I cannot understand is why this library facility has so many awful reviews on the forum, who are slatting this facility and how it eventually clogs up memory with duplicated files.
there are many attempting to disable or totally eradicate it from the computer There is a "registry hack" website for windows 7, which disables the library.
I dont't have to reinstall all my system because the snappy search that i loved so much in windows 8 does not longer works, it takes ages now (already disabled internet search).
Is there some tweak to restore the "search" efficiency ?
I recently upgraded to Windows 8.1 from Windows 7 and noticed my USB 3 WD Passport external hard drive stays powered on as well as my round LED's (Lock/Start/Reset). With Windows 7 I just enabled EuP in the bios and that powered everything down when I shut down including the LED's. Now with Windows 8.1 that function doesn't work. They all stay on. I tried disabling all the power functions in Power Management for the USB but still, the power stays on. For some reason the EuP enable function does not work like before. I believe its related to Windows 8.1 since it worked fine with Windows 7. For some reason they locked USB power after shutdown.
PS: I already tried resetting the bios to no effect.
I have a Windows 8 laptop. Windows 8 came pre-installed means it is Windows 8 Core/ OEM version, if that matters.
my other two laptops are Windows 7 laptop and Macbook Pro plus android handset.
sometimes all the three laptops are ON and operational and are connected through WiFi.
I have Remote Desktop Sharing enabled in my Windows 7 laptop
I have installed third party RDP server in my Macbook Pro
I have enabled Remote Desktop Sharing in Windows 8 laptop
Chart below shows kind of working sketch
Client Device Server Device Result Windows 8 Laptop Windows 7 Laptop OK Macbook Pro Windows 7 Laptop OK Android Handset
Third Party RDP Client Windows 7 Laptop OK Windows 7 Laptop Macbook Pro
Third Party RDP Server OK Windows 8 Laptop Macbook Pro
Third Party RDP Server OK Android Handset
Third Party RDP Client Macbook Pro
Third Party RDP Server OK Windows 7 Laptop Windows 8 Laptop No Responce Macbook Pro Windows 8 Laptop No Responce Android Handset
Third Party RDP Client Windows 8 Laptop No Responce
I tried using both IP and netBIOS name. Ping works just fine in both ways.
Now, One thing is clear. something is wrong in Windows 8 settings or something.
assuming that Remote Support is allowed in here... is there something I am missing in Windows 8 configuration?
My problem is ever since I installed windows 8.1 upgrade my desktop short cuts no longer work. Not even the ones under the new start button. I have to manually go into the programs folder, find the program I want to use and launch it from there. Every time I attempt to launch it through the start button or the desk top my win zip program pops up like it wants to unzip it. It never did this until I I upgraded to 8.1 I wished now I would of made a restore point before upgrading so I could get rid of this god awful 8.1. It has my PC totally messed up in trying to launch programs now.
Also, I suspect the new skydrive has something to do with it since the skydrive folder opens after the win zip program pop's up. I never used skydrive before and to be honest I really don't like it nor do I want it. I feel like it got shoved onto me.
The images shows what happens when I try to access something from the new start button, but I get the same problem if I have a desk top short cut. Surprizingly the control pannel and windows defender still works on the desk top, it's the only thing that does.
I have Windows 8 and suddenly my shift select doesn't work. I can no longer select a group of files Control select works but not shift select. What do I need to do to correct this?
View 3 Replies View RelatedThe other day, I built my first server (Well, not really built it, It was an HP Pavilion XD) I set it up perfectly with Windows Home Server 2011 and when I went to set up remote access, I get this (the attachments).
My router is a Linksys WRT160Nv2. I set up UPnP and did what Microsoft said here for my router: Windows Home Server Router Setup
My issue first originates with going through the windows 8.1 store app to upgrade windows 8 -> to windows 8.1.
"turn off bitlocker because it isn't supported in the edition of windows you want to install"
I am not sure whether i encrypted the drives after installing windows 8 or in windows 7, nevertheless i do know the encryption passwords to the drives. The biggest problem is therefore trying to remove/disable the encryption to upgrade.
The Applet in the control panel is missing for some reason. I have seen some guides which rely on this applet which is usually situated between auto play and colour management.
I would like to remove/disable the encryption for the upgrade, or confirm the idea that if i disconnect the two drives that are encrypted i could upgrade the OS to 8.1 and wouldn't need to worry about the encryption. The concern is that the 8.1 OS would not read the drives hence the upgrading message.
My specs are this , related to Bitlocker:
Windows 8 64bit - standard (non-enterprise, pro)Hard drives:1 X 128GB SSD - C:/ windows installed here ** NOT ENCRYPTED **1 X 2TB HDD - D:/ + E:/ **ENCRYPTED**1 X 3TB HDD - F:/ **ENCRYPTED**
For many years, I've used the Generic / Text Only virtual printer driver to convert Web pages and other files to plain text with minimal formatting, but the last time I used it, the resulting file was peppered with unnecessary spaces, making it close to indecipherable when viewed in a text editor. Has some recent update changed the way this driver works (or, in my case, doesn't work)?
I've attached two files to illustrate the problem: filler.html contains a few paragraphs of boilerplate text, and filler.prn is the result I get from loading filler.html into Firefox and printing it to the Text Only "printer". (Both files were renamed to filler.*.txt to conform to this forum's limitations for uploaded files.) Note that the output file is more than ten times the size of the input file; if you examine it with a hex editor, you'll see that the increased size of the output is due to many sequences of a carriage return (without a linefeed) and several spaces being unnecessarily inserted in the output stream every few characters.
I imagine if this were sent to a 1970s-era printer, the defects in the output would be invisible on the page, but since the whole point of the Text Only driver is to bypass any physical printer, I don't understand this change in behavior. Is there any way to prevent this and get back to the output I'm used to?
File Explorer Windows 8... I cannot open Documents,Pictures Videos etc..a message comes up ms;library is no longer working, the library can be safely deleted.. ? when I delete them,it deletes the icon on the left hand side as well so I cant right click to default it....
View 3 Replies View RelatedWhen I installed my copy of windows 8 using a dvd, It installed a recovery partition during the installation. This partition allowed me to do things such as create a recovery drive, and use startup repair, all without needing to insert an installation disk. For some reason, this recovery partition is no longer working. I can't create a recovery drive without being told to insert installation media, and there are no troubleshooting settings when I launch "advanced startup". I noticed this after I deleted all of the bcd bootloader entries in easybcd, and tried to create a recovery drive. I don't know if deleting those entries could have affected windows but I think it might have something to do with it.
The recovery partition is still there, and the files in it are still there.
I can't get into my Documents folder. Every time I go to get into it, this little pop up message come up.
It tells me:
" "Documents.library-ms" is no longer working. This library can be safely deleted from your computer. Folders that have been included will not be affected."
I have also include an image of the message.
It also happens when I try to get into my Pictures folder. Just lays "Pictures.library-ms" etc etc etc comes up.
My old computer was running Win 8.1. The new Computer came with 8. I only have one monitor so I was using Remote Desktop to access the old computer and transfer things over. At some point I decided to upgrade the new one to 8.1. Now they're both on 8.1 That's the only thing that changed, but Remote Desktop stopped connecting. I can access folders and such across the network. I can log into the old one with Team Viewer but Remote Desktop will not connect. It keeps saying the other computer is offline or does not allow remote connections (it does, I checked multiple times) is there something that changed in 8.1 that would stop Remote Desktop from working?
Out of curiosity I tried using Remote Desktop from my laptop and it connected to the old computer fine. So it must be something on the new one.
Edit: I've now also tried connecting from the new PC to the laptop with RD and it gave me the same error about the laptop being offline or something
Edit 2: Now I tried it again so I could get a screenshot of the error message and it worked fine.
I have a eHome IR Transceiver/Receiver and a Media Center Remote ,from a previous PC.
This receiver connects to a USB port and it is recognized in the Device Manager with the drivers, it says the device is working correctly there.
It's listed under Human Interface Devices as Microsoft eHome infrared transceiver, also in System Devices - as Consumer IR Devices.
I have a Hauppauge WinTV Tuner card.
Remote is not being detected by Windows Media Center or in WinTV app.
WinTv has an app IR Remote which is being started, also a config tool which does detect the remote.
I have Windows 8.1 Pro 64 bit with Media Center.
How to make this possibly work for Media Center, since nothing shows in settings of Media Center or WinTV.
Could be possible it is an older model transceiver,may not work, but it is being detected by Windows.
I have a TSST 208DN DVD drive installed in a Win 8 Pro Toshiba C855 machine. I am no longer able to use the drive.
The problem began with my always having to reinstall the drivers upon reboot. I found a solution, or so I thought, that advised me to delete my upper and lower filters entries in the registry. I only had an LowerFilters entry for AnyDVD. I deleted it and can no longer use the drive.
Dev Mgr shows drive with yellow excl. triangle (see image #1 below) and this msg under the general tab of properties - Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) (see image #2 below). I have drivers from MS and Toshiba installed (see image #3 below)
image #1
image #2
image #3
I have already uninstalled and reinstalled and rebooted many, many times. These are my current registry entries:
image#4
I have uninstalled and reinstalled AnyDVD. I have put back in the LowerFilters key and deleted it and rebooted many, many times. The registry entries look like those on my other laptop with the exception of lowerfilters set to AnyDVD and upperfilters set to the manufacturer's driver (GEARaspiWDM) and that machine works just fine - for about 10 minutes and then overheats and shuts down - it's a Dell - but that's another story.
When USB is inserted, I no longer get the standard menu that asks what you want to do, open or play or...
I did get it the 1st time I inserted a usb in one of the drives, but I must've clicked on something and now I no longer get the menu!! I have win 8 installed in hp g6... I've tried different usbs and different usb slots same thing.
I have to work across three PCs, for which I use a KVM switch. But while I'm on PC 2 or 3 I like to make notes on PC 1, so I use a Bluetooth keyboard and a second monitor which is always on PC1. This has been working fine for weeks.
PC1 is Windows 8.1. Every few days I've had to reconnect the keyboard by going to Bluetooth, detecting it and pairing it again. Windows gave me a code to type into the keyboard and I was away, no problem.
Since Wednesday (23rd) I've been unable to do this. The PC detects the keyboard after a longer search than before. It pairs with the keyboard and says it's connected but the keyboard doesn't work. When I return to the Bluetooth screen, it's gone from the list of devices. I've replaced the keyboard batteries and tested it with my iPad, where it works perfectly well. So my sequence is:
type Bluetooth at Windows home pagesearch for devicesthe keyboard is foundclick Pairwait ...'Enter the passcode for your keyboard; you might need to enter the same passcode into the keyboard'ClickTtry entering a passcode on itcode comes upput it in. 'connecting' then 'Bluetooth 3.0 keyboard connected'; graphic shows still searching for devicesafter close Bluetooth Devices window, keyboard doesn't workReturn to Bluetooth screswitch keyboard off and on, it disappears from devices list
I connected a hard drive to my PC. I was able to read/write to it just fine. In fact, I've used it various times in the past. I just tried connecting it again now, and the drive is not showing up on Windows 8.1 at all. It's not being detected.
I connected the drive to a Mac to see if it was the drive, but it wasn't: the Mac was able to read it just fine.
I've had a similar situation in the past with this machine, where my iPhone was, seemingly out of nowhere, no longer recognized by the system. Plugging it in would register on the phone, but the PC wouldn't acknowledge its existence.
I'm completely at a loss as to why this can be. Other drives connect to the PC just fine (in fact, I have another one connected now, as I write this, backing up some data).
The attrib +s +h command that is used to make a file a system and hidden file is no longer working. When i try to use the command on a folder, the folder just shows up as a normal hidden folder which can be easily viewed using show hidden items in view option. It looks as if every system file is not recognizing itself as a system file.
Also every folder in my system has appeared a desktop.ini and thumbs.db folder.
I am running Windows 8- 64 bit
I can load into BF 3 fine but when I get into the game, the mouse buttons won't work, I can move the cursor but not select any of the options, kits, etc.
I've only had it since upgrading to Windows 8 and adding another monitor.
I recently purchased a new computer with Windows 8 pre-installed. I purchased a Media Center key and all was well. I had to reinstall the operating system using a system restore disk and upgraded to Windows 8.1. When I try the Media Centre key again it says it won't work.
View 8 Replies View RelatedI recently upgraded to windows 8.1 and my apps notifications are not working any more I did everything went into pc settings, I checked each individual app and everything is on.
View 1 Replies View RelatedI recently upgraded from Windows 8 to 8.1. After the update Windows Media Player doesn't recognize any of my libraries even though the correct folders are selected to be included.
I already tried to disable the windows media features in the control panel, reboot and then re-enable but that had no effect.
Incidentally, if I manually start playback of a song from a folder windows media player does work so the issue is just that it won't recognize my libraries.
I have upgraded from Windows 8 to 8.1. After doing so and making sure my accounts are all setup, I have found that I can not get the mail tile to act "live". I have verified it is set to live by right-clicking and seeing that link state "turn live tile off". I tried doing that and then turning it back on. I have tried rebooting. But the tile just isn't live. My other live tiles (news, finance, weather, store, etc) all seem to be live. It is only mail that I am having a problem with.
View 2 Replies View RelatedI bought this particular computer for the Intel wireless display, but after upgrading (is it really an upgrade?) to windows 8 my WiDi is no longer working. I tried to install the latest drivers from Dell support but it tells me my platform is not supported.
View 14 Replies View Related