Hardware Drivers :: Adjusting For A New SSD Drive?
Jul 27, 2013
I have recently upgraded hardware on my desktop. The major change is that I installed a new Solid State Drive as my drive C:. I think I also read somewhere that these drives "don't like" being written on too much and that one needs to enable/disable certain OS features for such drives.
So I checked the properties for the drive C in Windows 8 and here's what I got:
As you see "Allow files on this drive to have contents indexed in addition to file properties" is checked.
Does it need to be checked for that drive?
And also, is there anything else that I need to change in the settings to accommodate for the SSD?
View 9 Replies
ADVERTISEMENT
Jul 28, 2014
I have an ASUS S400CA running Windows 8.1 (64 bit) and I am having a major issue. When I click Fn + F5/F6 to increase or decrease the brightness, nothing is happening. The slider is stuck beyond a point and the brightness does not change regardless (it is stuck at the highest setting). I have tried to fix this issue by changing brightness settings in the Control Panel, Battery Options, etc. but nothing is working.
I have tried to find previous versions of the Intel HD Graphics 4000 Driver on the Asus website but only find the one I am using. What should I do?
View 1 Replies
View Related
Oct 8, 2013
I just built a new gaming PC with windows 8 and an msi z87 g45 motherboard. It's amazing, and I installed the Soundblaster and realteck Hd drivers.
The only problem that I'm having is that every time 2 things play at once, the other's volume is lowered. like when I am playing battlefield 4, my gun sound good and then when my friend talks on teamspeak my gun is barely heard for a few seconds afterward. Ive tried changing the "communications- do nothing" thing, but it's not working.
View 4 Replies
View Related
Apr 8, 2013
When i try to record from my sound card the volume will randomly go up and down when i try to replay it.
When I try to record from my microphone in the microphone input port it gives an odd problem. Whenever I sustain a note it begins to record just fine but after about 2 seconds the volume adjusts down to about 20% of the original and continues to record. It does this in multiple sounds recording software programs. I have skype turned off and no other microphones hooked up. In the communications tab of the sounds menu I have set it to 'do nothing' but this had no effect. It seems like there is some sort of auto volume leveling thing going on but I cannot find where it would be. I have an HP desktop with beats audio not sure about the sound card otherwise.
View 1 Replies
View Related
May 7, 2014
I found that f.lux is really useful to your eye when you look pc all day.
However, I found that the light setting doesn't gradually change according to time.
For example, at noon the setting is at the highest peak. So there is different light setting across the day time.
It would be good for night if there is automatic setting for light gradually set to the lowest at midnight.
When this happen, the word and picture look totally different and the nothing come out from the blue colour. I might as well go to sleep and continue work tomorrow.
Is there a way to set a few setting and when the time come, f.lux change the light setting? It may not be fully gradually change but at less there is different in the light setting than have it all same all day.
View 2 Replies
View Related
Mar 5, 2013
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies
View Related
Jul 1, 2014
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
View 5 Replies
View Related
Jul 21, 2014
When I tried to format my pendrive is not working ,it is also showing in hidden.
View 3 Replies
View Related
Jun 3, 2014
2 out of 3 USBs worked on Win 7 on same PC but wont after installing Win 8.
They all work no problem on my netbook with Win 7 installed. Here is the pic about problem: [URL] ....
As you can see, they wont show up but they are recognized...:/
I tried reformatting them on netbook, still nothing. And tried allocating them drive letters and formatting them but error shown in pic above pops up ....
Out of those 3 USBs 2 are the same (same model)! But 1 works and other doesn't...
View 4 Replies
View Related
Sep 15, 2013
From yesterday I am facing a strange problem : I am getting a error whenever taking "Properties" of any drive. Right Click to any drive -> properties.
It's showing "The properties for this item are not available".
View 9 Replies
View Related
May 17, 2013
Since refreshing win 8 my DVD drive doesn't appear in 'computer' and doesn't boot from the win 8 disk. The green light on the drive flickers and you can hear the drive reading the disk.
View 3 Replies
View Related
Jun 30, 2013
I have this problem were external hard drive do not show up on my PC.
First my I put my friends in and it did not work, then I went out and brought one myself (different brand) and it does not show up.
Windows automatically installed the drivers it said it even know what time of external it was. But now it doesn't appear in explorer. What should I do. It appears in the device manger list, but how do I access it?
View 1 Replies
View Related
Oct 26, 2013
I have windows 8.1 and am trying to do a refresh as I've had some problems. But I keep getting a message that says, "The drive where windows are installed is locked. Unlock the drive and try again." I then did a scan using "SFC/SCANNOW" When it was finished it said that it found some corrupt files but could not fix some of them. So the question is: What is a locked drive and how do you unlock it?
View 9 Replies
View Related
Nov 15, 2013
i accidentally disabled my disk drive and i cant re-enable it again here's a picture for the propertes and i cant find the enable box !
View 9 Replies
View Related
Aug 25, 2014
I want to partition my C Drive to install Ubuntu 14.04 so I can dual-boot with Windows 8.1. When I tried to shrink the volume it wouldn't let me got higher than 4GB even though its a 500GB drive and I have over 259GB free. From looking at it the drive seems to have a few recovery partitions one being just under 24GB. Does the number of drive partitions factor into the amount of space I can give to a partition. Also if the recovery partitions are factoring into this can I move them to another drive or just outright delete them.
View 9 Replies
View Related
Sep 19, 2013
I have just bought a 4TB external USB 3.0 hard drive. The plan is to copy all of the data from my current internal 2TB drive to the 4TB, then I'm going to crack the case of the external hard drive open, take the drive out, and put it in my PC to replace the 2TB drive that's in there now (which I know will void the warranty). This isn't going to be a boot drive as I have an SSD for that.
I had read that Windows does not support large drives of this size and that it would show up as 2 partitions, so I was prepared to convert the drive to GPT in order to have 1 large partition. However, I connected the drive up to my Windows 8.1 machine and it shows as 1 large partition of 3.63TB, which is about what I expected.
Does this mean I don't have to convert the drive after all? Can I do what I'm planning to do and everything will work fine? Or do I need to convert it to GPT before I copy all of my data over and if so, how do I do that exactly?
View 5 Replies
View Related
Jul 22, 2014
If I add a SSD (Crucial MX100 CT256MX100SSD1 2.5" 256GB SATA III MLC Internal Solid State Drive). Can I use it as the boot drive as well as the backup drive? Then use the existing 1TB HDD as the main storage drive. I need a backup drive so I figure if this works then it could give me a performance boost as well. How could this best be done to satisfy both needs? Would I put all the programs on the SSD and all the data on the HDD? My current drive is at 119GB used space. How do I determine how much back up space is needed?
View 3 Replies
View Related
Aug 4, 2014
I am unable to format drive D, It shows an error "Windows was unable to complete the format" even in disk management the format option is not click-able for drive D. I had windows 7 Installed in it, and later I installed windows 8.1 in drive C. right now I am using windows 8.1 and I have also deleted some important system files that were in drive D, so windows 7 is not usable, and I don't want to use it.
View 3 Replies
View Related
Sep 23, 2013
I have a TSST 208DN DVD drive installed in a Win 8 Pro Toshiba C855 machine. I am no longer able to use the drive.
The problem began with my always having to reinstall the drivers upon reboot. I found a solution, or so I thought, that advised me to delete my upper and lower filters entries in the registry. I only had an LowerFilters entry for AnyDVD. I deleted it and can no longer use the drive.
Dev Mgr shows drive with yellow excl. triangle (see image #1 below) and this msg under the general tab of properties - Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) (see image #2 below). I have drivers from MS and Toshiba installed (see image #3 below)
image #1
image #2
image #3
I have already uninstalled and reinstalled and rebooted many, many times. These are my current registry entries:
image#4
I have uninstalled and reinstalled AnyDVD. I have put back in the LowerFilters key and deleted it and rebooted many, many times. The registry entries look like those on my other laptop with the exception of lowerfilters set to AnyDVD and upperfilters set to the manufacturer's driver (GEARaspiWDM) and that machine works just fine - for about 10 minutes and then overheats and shuts down - it's a Dell - but that's another story.
View 9 Replies
View Related
Sep 15, 2014
I have a Samsung 530U3C laptop with a 500 GB HDD and an internal 24 GB SanDisk SSD. For some reason, the SSD is suddenly invisible to my system. It does not show up in Disk Management, it does not show up in DiskPart and it does not show up in Device Manager. Nowhere to be seen.
The BIOS has never displayed the SSD drive, so I can't see it there either. I don't know if it's connected with SATA or PCIe. All I know is that it's built in somewhere, and I don't see it if I open the laptop case. I also know that it's not a HDD/SSD hybrid.
However, if I boot up from a recovery USB and start a command prompt, I am able to see the SSD drive in DiskPart. But if I do the same after booting the OS, it's not visible.
Here's some details:
I've installed ExpressCache and Intel Rapid Start Tech to work with the SSD. This is what I did to the SSD:
Cleaned the drive with DiskPartCreate partition msr size=6200 (partition for Intel Rapid Start, 6 GB RAM)Set the partition id=84 (hibernation partition)Installed ExpressCache, which automatically created a partition of the remaining unallocated space.
This setup worked fine for a few days, but somehow the SSD drive is now invisible.
View 4 Replies
View Related
Oct 28, 2013
When i power on computer, my usb flash drive isn't recognized right away. I need to re-plug the flash drive every time, when i power on computer, then it's recognized normally.
It's not such a big problem, but I have this usb flash drive always plugged at computer back side.
View 9 Replies
View Related
May 30, 2012
I know my dvd drive was working a few weeks ago cause i used it to load up shogun 2 total war. My bios recognizes my driver but i dont see it any were in my device manager. BTW i was running windows 7 and had no issues with my dvd driver.
Update i click show hidden devices and i see my dvd but I can't find it anywhere when I look in my computer and when I put a disk in it doesn't boot up the cd or anything. I also asked it to check for updates but it says i have the latest updates for the drive and the device is working properly.
View 3 Replies
View Related
Nov 7, 2013
I recently discovered that one of my drives has been at 100% activity with no data being read or written. This particular drive is used for virtual instruments and samples for music. I've never had issues before, but I found it odd that loading projects took an insane amount of time to load, which lead me to check the disk usage of this particular drive.
Current response time spikes into the tens of thousands. Again, nothing is being written or read. If I open the drive, I can see all my files, but the drive never seems to stop "searching". I've attatched a picture below:
View 2 Replies
View Related
Aug 25, 2013
I have a question about my C drive.
I started noticing about a week ago that I was slowly losing memory in my C drive without me using it. In other words, it is disappearing. I have seen this before on several windows 7 computers, but I don't know how to solve this problem when I'm running windows 8. (I'm running it on a 128 GB SSD HP spectre.) A few days ago I had 4.79 GB free. Yesterday I had 4.67 GB free. This morning I have 4.66 GB free. All this while I have not saved anything onto my computer, installed any updates, etc.
Furthermore, when I purchased this computer a year ago, it already came with about 70% of the C drive used up. I assumed it was bloatware that was taking up the space and have since given up on removing it, but I'm growing suspicious that it has something to do with the disappearing memory.
View 5 Replies
View Related
Apr 1, 2013
When I put my usb in my pc I see on my Computer a new drive letter H:
So now I have: C: D: E:
Floppy: A: and my DVD as F: and a Removeable disk I: but I don't have a any removeable disk on any usb port in my pc.
When I put now my other usb it's assigining it as drive H:
But I need it to be G: since I need to save to it something from a program I saved before and it must be G: not H:
How can I change/force it to be drive letter G: instead H: ?
View 1 Replies
View Related
Feb 28, 2013
I have a TDK 16GB usb pen drive that shows in Device Manager when inserted but not in Computer. It does sometimes appear but very rarely. I have updated all driver via Device manager an they are fine.
View 4 Replies
View Related
May 16, 2013
My C: is a SSD Id like to have back as one disc, one partition..
The 101 mb 'unallocated' It was previously listed as " reserved system protected drive" I removed and formatted its 101 mb...back to empty, unallocated, can I lose that partition??
It shows up under disc management as a part of c...but really has no drive letter at all it just shows as C:
View 3 Replies
View Related
Nov 25, 2012
I just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
View 8 Replies
View Related
Jan 19, 2013
DVD drive not recognize by windows-8 after update
i installed WINDOWS-8 RP 64bit for trail on DG41RQ mobo (as well as on other PC (DG31PR) where there is no problem).
all was well till i updated the intel chipset driver (Intel Chipset Device Software version 9.1.2.1008)
and the BIOS version (to RQG4110H.86A.0017.EB)
now the system doesn't recognize my LG DVD drive (HL-DT-ST DVD-RAM GH22NP20) , (also in device manger and also in SAFE MODE) my BIOS dose recognize it and i CAN boot a live Win-XP from it.
i tried to roll back the IDE intel controllers drivers, but no change.
i have an IDE HDD as master, and the DVD Drive as SLAVE (recognized as such by BIOS).
my UEFI is desabled in BIOS (i don't know what it is actually).
(i have Activation Key (PRO) but i want to make sure all is well before activation)
View 6 Replies
View Related
Jun 28, 2014
I have a external drive that I used for backup with XP. What do I need to do to make it work with windows 8? How do I get win to recognize it? It is a IDE drive and is connected via USB.
View 5 Replies
View Related
Aug 17, 2014
My portable hard drive stops showing up all of a sudden. It is connected to a USB hub. When I go to 'Disk Management' in 'Computer Management', the hard drive shows up as Unknown - Not Initialised. Also this hard drive works while not using the USB hub, and the USB hub works as well with other devices.
View 9 Replies
View Related
