suddenly today when i tried to boot my pc pc i faced the "0xC000021A" error. I have tried a lot of things such as safe mode, windows auto repair and "bootrec /fixmbr" & "bootrec /fixboot" commands but nothing worked..
View 5 RepliesOnce in a while I get a 0xc000021a BSOD, which seem to be happening right after boot.
Here are the latest two.
Windows 8.1 enterprise, with all updates except September update KB2984006.
The SF Diagnostic Tool doesn't work for me. It gives no results.
I own Dell laptop (windows 8 pro with media centre -- GENUINE , NO PIRATING,nothing cracked) which is hardly 3 years old.. it just worked fine till yesterday evening.. i was playing saints row 4 and after closing that game noticed that the battery is about to get low to 10 %.. i just kept it in sleep mode to charge it later as the current was not there in home.. when i just make it resume u just got a blue screen saying "Your PC ran into a problem and needs to restart.We're collecting some info,and then we'll restart for u(100 % complete)" and I am stuck here with no change in screen in the meantime the area of the processor fan gets heated to such an extent that we cant even able to touch it...
View 3 Replies View RelatedAsus S200E notebook, Win 8 Pro
I recently took in this laptop for my neighbor. The original idea was to scan and clean up the system. I set the laptop up in my office, ran an MSE full scan with no issues. Then ran a full Malwarebytes scan, which returned a few pups, which were removed.
After tending to other matters, I turned back to the laptop to find notification that there was a problem and windows had to restart. I ran another MWB scan only to have the system restart again. This time, the system tried to repair itself with automatic repair. No go. All reboots ended up back at the advanced startup options screen. No ability to restore the system image, no system restore. All I could get to was the cmd prompt.
Googling turned up all sorts of people with this issue (mostly older posts), but very few solutions.
This fix got my system booted again by removing pending update operations.
Apparently, an MS update is the source of the problem. To further reinforce this, until I turned off automatic updating, it would happen again. I also disconnected the machine from my network to revoke its internet access.
So the machine is no longer having start issues, but I'm not sure which update it is. I have 17 pending optional updates, but those haven't installed, so I doubt they're an issue.
I checked update history and there are 29 failed updates. All are dated within the period that the laptop has been in my possession.
I think it would be quit tedious to hide each one individually, only to blue screen, enter the DISM fix, get back into windows and do it all again. How I could identify which update is resulting in the stop error.
To muddy the waters, I've been trying to image the drive via Acronis TI 2014 but can't complete due to 'found disk errors' on C:. Trying to create a system image from within windows halts due to disk errors also, but chkdsk reports no errors (from windows and from cmd).
Sporadic BSOD 0xC000021A at shutdown
View 3 Replies View RelatedClient computer that shows black screen with text at boot up. Cannot boot into Windows 8 (8.1?)
This is what is on the black screen;
Your PC needs to restat.
Please hold down your power button.
Error Code 0x0000012a
Parameters:
0x0000000000000001
0x0000000000000046
0x0000000000000000
0x0000000000000000
After re-boot a message shows
Prepairing Auto Repair
Diagnosing PC
PC Did Not Start correctly either with 2 options - Restart and trying any of the Advanced Options
Restart option did nothing but restart this cycle of BSOD, etc. Advanced options to troubleshoot (Refresh, Reset, System Repair, Command Prompt are not available due to the following message:" You need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC"
No system recovery disks or Windows 8 Installation media available.
PS :Cannot boot into Windows 8
I was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
I was working on my laptop on Tuesday and all of a sudden it blue screened with the following error:
system thread exception not handled athwbx.sys
I have tried to uninstall the graphics card as a lot of searches mentioned that this was a problem. I can boot the laptop to safe but cant do much else than that. I have also tried system restore but that fails as well.
Computer: HP Pavilion DM4 3070-se (Beats Edition)
OS: Windows 8
It would not boot up, and when I started it the BIOS showed a '3F0 hard drive not exist' error. I left it until this morning, and tried again. Everything booted up and it reached the Windows 8 login screen -- I have automatic login enabled, but the screen freezes (spinner indicator stops suddenly) and the screen goes black. It restarts again, and sometimes I get the Windows 8 repair screen, sometimes I get the 3F0 error again.
The inconsistency makes me think that something is screwed up hardware-wise, but I'm not totally sure. Apparently, from reading online, the problem could be the HDD (I don't think this is the case) or a poor cable connection (most likely), or a software problem.
Because I don't have recovery media for Windows 8 (I installed it on a USB drive I don't have with me) I can't try a system refresh or restore, but I'd rather avoid those if at all possible.
Do you all think that a good option might be to take it to a hardware repair place and have them check the cables for errors?
I have an Aspire S3 laptop Windows 8 to 8.1 - that now has a BCD error blue screen upon start up that is error OXCOOOO0D - boot configuration data Recovery
Blue screen reads:
Your PC needs to be repaired.
The BCD is missing some required info.
File:BCD
you'll need to use recovery tools...
I don't have an install/repair cd/dvd, and I don't have my product key - since its on the BIOS and is unretrievable. I want to save ALL my files ... All I tried so far is to get into the BOOT by pressing F2 and switched it from UEFI to Legacy only it asks for BOOT disk...
Went to turn on my computer today and got a screen with the Dell Logo and a message "Boot manager has recovered from a critical error." It went on to say there were missing or corrupt files that were restored from the default configuration. I did a Google search and found absolutely nothing about this error. This laptop is only 2 months old. I couldn't find anything in the event viewer either.
View 1 Replies View RelatedI have windows 8.1 and Lenovo y510. After upgrading from 8.0 to 8.1 a have several problems with my PC. Right now suddenly I cant start my PC.
I have BSOD
Recovery
Your PC needs to be repaired.
The boot configuration data file is missing some required information.
FileBSD
Error Code:0x0000034
Need to use recovery tools on your instalation media. If you dont have any contact your system administrator or PC manufacturer.
ESC for UEFI firmware setting.
I try different setting in setting utility (after pressing ESC) and nothing changed.
I dont have any USB or Disc with windows. (but i do have legal copy - it was already installed in my PC) so i cant restore pc from installation media.
Earlier, about an hour ago, I left to go job searching, and left my computer in hibernate mode so I could bring it back up as soon as I got back. When I tapped keys on the keyboard, the computer powered up as usual, but it brought up the BSoD, stating it was missing files.
Prior to receiving this error, everything was working fine. I even set it to hibernate mode during the night, and it powered on this morning without any problems. I dunno if it's the multimedia keyboard I'm using or what that caused it.
I don't have an installation disc (since I bought it from Fry's Electronics about a year ago with 8 pre-installed), and neither do I have a recovery disc (since I didn't know how to make one.
Computer info: Windows 8 x64
Manufacturer: ASUS
how to fix the missing boot files, and how to do it without causing any data loss from either of my hard drives.
I'm running Win 8 Pro which is installed on my SSD and I need to remove my secondary drive and connect it to another PC. When I do this, I get a boot error. Why an error shows up especially when it is not a boot drive.
Error and My Disk Management information is attached as an image to this message.
C: is the SSD and K: is my PATA drive which I want to move.
I recently clean installed windows 8 to my pc and now i get a kernel data inpage error when i start up. The pc has to restart for me to log in successfully. Check the dump file. I love windows 8 and going back to win7 is not an alternative.
Dump files:> [URL] .....
I am using InsydeH20 rev 3.5 F.48 bios my chipset is AMD 1705 rev 0: steps for an upgrade to UEFI required.
I have windows 8 installed from dvd and after a restart the pc won't boot anymore. It tells me:
Your pc needs to be repaired. The required boot configuration data file is missing some required information.
File bootbcd
Error code 0xc0000034
So I tried to rebuilt the bcd, used the bootrec commands , tried auto repair, tried system recovery but nothing seems to work.
I have a Samsung 700T (tablet) for work running Windows 8.1.
I connected via USB a HP Laser Jet 400 printer. After connecting I received an error. I researched it and found it was due to HP's Smart Install. The Tablet recognized the printer initially as a USB Mass Storage device and the drivers conflicted with it. Once I turned off the Smart Install on the Printer, everything loaded fine and printed fine. No problem here. HOWEVER!!! In My Computer, I showed a HP CD ROM as an accessible drive which was weird since I obviously didn't have a CD ROM hooked up. I figured it was due to the smart install. I didn't think anything of it and that it would clear itself since no CD or drive was present.
Fast forward,
I had to reboot my tablet to allow other updates to finish. Upon restarting I get the error "Remove Disks or other Media. Press any key to restart"
There is obviously nothing in/hooked up to my tablet so there is no media. I believe the OS is viewing the HP CD as still in the drive and is not proceeding to boot.
Note, I obviously can't load windows since it won't boot, so I don't believe I have any way of ejecting or deleting the CD or drive.
Ok so my computer just started randomly making this error and I dunno what to do. Heres a pic of the errors. What do I do? I even went through my cisco ITE chapters, on computer maintence and couldn't find the source of the problem...
View 1 Replies View RelatedI am finding a problems with windows 8 when i start the computer it crashes and I get blue screen error my anti virus scanned everything it was clean no viruses or threats and when I restart my computer the screen freeze even my mouse cursor freezes and again i have to restart and updates are fully updated.
View 9 Replies View RelatedI own an Asus laptop with pre-installed Windows 8.1 and, after downloading & installing recent Windows updates (20th of September 2014, if memory serves me correctly), I am unable to access desktop because system freezes at boot sequence returning me this error: "Secure Boot Violation. Invalid signature detected. Check Secure Boot Policy in Setup" printed inside a small red box.
After googling around, someone suggested to disable "Secure Boot" from BIOS and enable "Launch CSM". I performed such operations but I got no results (BIOS menu automatically appears after every reboot). Someone else suggested to change boot sequence and start system from a Recovery CD but I got no CD supplied with my laptop as Asus stopped providing CDs from very long time AFAIK.
I am quite sure problem relies on Windows Updates because I used this Laptop very little times and no p2p or hacked programs are installed. In addition to that, as far as I read, it seems other Win users experienced the same issue after installing WinUpdates but they have different BIOS so is not easy for me to understand my BIOS accordingly to what they do in their own BIOS in order to solve issue.
What annoys me most is that I bought this Laptop in July 2014 and, just three months later, it got freezes because of official Windows Updates and not because of bad behaviour of user.
Lately just after I updated my Windows 8.1 all of the sudden my PC started shutting down for no reason and I had to restart it. It often occurs during the morning hours, but it also occurs during the evening hours, too. It's a Kernel Power error with Event ID 41, Version 3, Level 1, Task 63.
Here's the zip file and text document attachments I made which contains more information about what's going on with my PC.
SHERRY-PC-Wed_08_20_2014_100441_60.zip
File Type: txt Critical Error Details.txt
After awaiting at the login screen for a 3-4 hours (doing nothing), my PC suddenly restarted. I checked the event logger and saw a critical error 0x133. I'm attaching all information as described in the forum, in the attached zip file.
I would also like to add, that after running sfc /scannow, the system scan detected corrupt files but was unable to fix all of them (as it is saying). It also reports that details are included in C:WindowsLogsCBSCBS.log. Should I upload this file also ?
Every time i formatted my pc,then after sometime it gives a bsod error & restart then pc cant start then windows start screen loading & loading......
I updated all driver & ssd firmware but no result.
I collect dmp files & collect some data.
Stop code 0x00000133.
Related driver show hal.dll +546a
Due to restart i didn't collect so many.
I will update dmp file information shortly.
Your PC RAN into a problem:
c:windowsminidump70514-9265-01.dmp
c:userJonoappdatalocal empwer-19531-0.sysdata.xml
c:windowsmemory.dmp
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
View 6 Replies View RelatedToday I purchased a Dell Inspiron 3000 series laptop, running Windows 8.1 Update 1 64-bit. However, whenever I shut down or reboot, I get a BSOD with the error, DRIVER_POWER_STATE_FAILURE. Strangely, it only occurs when I am running on battery power, and after the up time of the machine is 7 minutes. If it's plugged into AC then I don't have any issues.
The minidump shows that the problem seems to be caused by NTOSKRNL.exe.
Randomly today my computer decided it did not want to boot. It originally had a different error code, but I found a tutorial on how to fix it, I followed the tutorial and my problem stayed the same but my error code changed. Basically something is wrong with my boot sector.
The initial code was 0xc0000225 and I used this tutorial to solve it: Solution to your PC needs to be repaired Error code: 0xc0000225
After that I got the new error: 0xc0000001. I have tried rebuilding the BCD, I have tried fixing the master boot record. I even started to go as far as to do a system "refresh" but windows told me that the HDD was locked and I have to unlock it to do a refresh, which Id much rather not do. When I tried to rebuild the BCD it detected my OS but when I told it to add it to the boot list it says "The requested system device cannot be found".
The weirdest thing is everywhere I look I am told to use the windows startup settings but they are totally missing from the menu. I booted to my bootable Windows 8 64 bit flash drive, selected repair my computer, then selected troubleshoot and advanced options and the only things that are available are system restore, system image recovery, automatic repair and command prompt. right under command prompt is where startup settings should be. I cant reformat because I have a lot of stuff that would take forever to get back like music etc.
Automatic repair didnt do anything. Safe mode does not boot either.
Laptop specs:
Asus VivoBook s500ca
Windows 8.1 Professional
8 gig of ram
intel i7 processor
HD 4000 graphics
500 gig HDD + 24 gig SSD (setup as cache)
- Upgraded to Windows 8.1 preview from Windows 8, works fine for weeks.
- Randomly crashed one day. I believe it may have been waking from sleep mode when this happened. It cited:
"Recovery
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains errors.
File: c:system32winload.exe
Error code: 0xc0000001"
- I've tried many recovery paths. BCDedit, bcdboot, fixboot, Windows 8 & 8.1 recovery media. For all of these I think I am either doing them wrongly or I get an error message that says it can't access/edit the bit where Windows 8.1 preview is.
- On a different drive I have a copy of Windows 8 that I used to clone to the other harddrive (now containing crashed 8.1 preview) over a year ago. They are unrelated I believe.
- There's a suspicious lack of Windows related folders on the D: drive containing the crashed Windows 8.1. D:windows doesn't exist and D:WINDOWS only contains one folder: "logs". The other folders such as "program files" are all locked.
I don't know what would be the cause of the problem every time I power-on my notebook Windows 8.1 will pop-up this that there something to be repair" and i check the details and this is it:
Your PC RAN into a problem:
c:windowsminidump-81014-26296-01.dmp
c:useracerappdatalocal empwer-91312-0.sysdata.xml
c:windowsmemory.dmp
Every time i open my notebook for example when i arrive at home,my notebook welcomes me with that error.
but after this i can work on notebook , browse, and anything you can do without experiencing any error.
My notebook is:
Acer aspire 5742G
4GB ram DDR3
Geforce GT540M (1GB)
Intel Core i5
500GB HDD
It's my memory dmp file.
I had BSODs happen occasionally but now they are happening like 3-6 times per day, sometimes back-to-back.
The list of error messages I've recorded for the ones that happened while sitting at my desk are:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (dxgkrnl.sys)
KMODE_EXCEPTION_NOT_HANDLED (amdppm.sys or hidusb.sys)
SYSTEM_SERVICE_EXCEPTION (dxgkrnl.sys)
PAGE_FAULT_IN_NONPAGED_AREA
ATTEMPTED_EXECUTED_OF_NOEXECUTE_MEMORY
RESOURCE_NOT_OWNED
IRQL_NOT_LESS_OR_EQUAL
TIMER_OF_DPC_INVALID (usbport.sys)
I have multiple browsers open and I play some browser based games. Usually not too much else running and hogging resources that I am aware of.
So my computer (HP pavilion HPE) BSOD'ed for the first time yesterday afternoon (running Windows 8.1, upgraded via download from original Windows 7, so I don't have a recovery disc). Along with the error code, the BSOD says that File: WINDOWSsystem32winload.exe is missing or contains errors.
I have tried pressing F8, Shift+F8, and holding Shift on start up, and nothing works. I know I'm supposed to upload dump files with this post, but I can't/don't know how to get my computer to the point where I can access these files. I can access the HP Startup Menu by pressing Esc on start up, which has an option to display System Information (not sure if below info is useful or not...):
Product Name: h8-1160t
Processor Type: Intel Core i7-2600 CPU @ 3.40GHz
Processor Speed: 3400MGHz
Processor Stepping: 000206A7 0000001A
Cache Size (L1/L2/L3): 64kBx4 / 256kBx4 / 8192kBx4
Memory: 8192 MB DDR3 / 1333 MHz / Dual Channel
Channel A: XMM1 0 MB / XMM2 4096 MB
Channel B: XMM3 0 MB / XMM4 4096 MB
Integrated MAC: 386077039221
System BIOS: CHG_711.ROM v7.11