I've got a problem - after I turn my notebook Asus M51Va into hybernation and then turn it on, usually (not always) it crashes with BSOD (hal.dll 0x0000009f). When I start system after turning it off - loading of Windows never ends with BSOD and everything is ok.
-Ram-TEST lasted nine hours and successfully completed -Change the motherboard (ASUS Sabertooth 990FX From R2.0 to MSI 890FX-GD70, the latter shall use at this time, the other I sold it) -Changed video card (ATI 6870 Updated NVIDIA 760) -Replaced SSD where the system resides, had a value SMART wrong, incorrectly replaced by Samsung (EVO 250GB) -Analyzed by-DUMP bluescreenanalizer and semrpe the same file with the same bug tails -Windows-formatted 3 times already
The temperatures are good .. I also have a Corsair H100i and a fairly spacious case that allows good ventilation (CM Storm Trooper) This is my components: CPU: AMD FX8350 RAM: 16GB (4 x 4) G SKILL 1866 MHz CAS 8 SSD: 250GB Samsung EVO Video Card: Zotac 760 amp edition! HDD: 3TB WD, 250GB WD Motherboard: MSI 890FX-GD70 Sound Card: Asus Xonar Phoebus ONLY Case: CM Storm Trooper Black Win 8.1 x64 Original I repeat that I do not overclock, the frequencies are those of series
Now I'll explain when I turn on my pc at COLD (the day after practically) happens to me .. and not always! However, if you reboot immediately after work PERFECTLY, and for hours and hours! without presenting problems or other, and even under stress. The next day, however, having been off the night it happens it happens .. this blue screen without doing anything specific! Coincidentally, sometimes even if I do nothing on windows just turned on, or a complete on the internet, or other, causally!
Most of the time i turn the pc on and i get the bsod with this message and it tryed to auto fix but to no avail. It was only doing it when I played games but I am lucky if I can get the pc to run for 10 mins without it going black screen then restarting.
gpu geforce gtx 560 ti cpu amd fx(tm) 8150 eight core processor memory 8.00gb ram (7.98 usable) resolution 1920 x 1080 60hz driver version 335.23 os windows 8 pro
When I start up my computer, go into windows, it takes a while to load then I get bsod and it restarts then works perfect, so now if I run it cold, I reset it immediately after switching it on, then it works. WTF?!
Plus now, it has started getting really slow and it lags. Like if I play music off my hard-drive, my 2tb storage, then open up chrome or do anything it gives me this electrical sounding lag. What can I do?
So recently bought a new PSU, Motherboard and 8GB of more RAM. I thought the BSOD's in the past were caused by a crap PSU however I bought an 80+ Corsair one and upgraded to a Z77 MPOWER motherboard. Have 4 crash dumps and only turned it on yesterday!
Last night my laptop (lenovo z400 ideapad, running windows 8 - i never updated to 8.1) went to a blue screen with a "kernel data inpage error" message. Tried to boot it back up, but once i entered my password and logged in, the screen looked wrong. The windows homepage had no apps and the background pattern was not the one i normally had. I couldn't click on anything, so i shut it back down and went to sleep. This morning, i turned it back on, and this time it looked normal when i logged in. However, after about a minute, it froze and would not unfreeze. Thats where i am now. I can open the computer in safe mode and it works fine, and through that i can access the event viewer and command prompt, etc. I did a disc repair, no luck, and a system restore failed. Like i said, computer only works in safe mode, so i dont know if I'll be able to do the right procedure to upload the dump file from the BSOD, but i can try. Lots of interesting things in the event viewer. I'm on my phone but i can sample them later.
For the past few days, my laptop has been crashing upon waking from hibernation. I initially thought it was a trojan or virus, but after poking around more I think its either a HD or driver issue. I installed Who Crashed and Blue Screen View, which mostly return ntoskrnl.exe, but have also thrown in tcpip.sys, AMPPAL.sys, and usbhub.sys. Asus Install seems to think I'm up to date on all the drivers, but after looking at some of these files, I'm not so sure. Dumps attached.
BSOD error. I've read through some posts with similar errors and I've done my best to try some of the basic solutions for this (i.e., update drivers) but can't seem to pin down the actual problem.
I woke up this morning and I had a Driver Power State Failure message on my computer. I've spent all day trying to get it fixed and I'm about to throw this 3 month old laptop through the window (I'm running a Lenovo Y510P with Windows 8.1).
In addition to the BSOD when I try to shut down my computer it never actually shuts down. The screen will go black for about 5 minutes but the light on the power button stays on and the computer starts back up again on its own. However it never actually gets to the desktop. The circle of dots just keeps going and going and after I force it to shut down twice the Automatic Repair kicks in but it says it couldn't fix the issue. When I enter the advanced options and do a system restore I can finally get to the desktop. When I try doing a system restore from the desktop it will get to the end and I get an error message saying it didn't work.
When I get to the desktop some things just don't work right. Right click on a folder, clicking on the file explorer pinned to the taskbar, etc. locks explorer up for a minute then nothing happens.
I've also ran SFC and a it said some files were corrupt and couldn't be repaired. Attached are my log files.
So last Sunday I woke up grabbed my computer which I had simply closed the night before, nothing unusual and the screen was all black so I just figured it was a random problem and manually shut down. When I powered back on initially I got zero response, just a black screen, no HD activity no fan spinning eventually (anywhere from 5-15 minutes) in a sort of delayed boot action it began booting but it took forever to boot into Windows 8.1 which I upgraded to months ago.
So my question is two-fold, I don't think the BSOD issue is related to the incredibly slow/delayed start up, because this happens before the OS even begins loading if I'm not mistaken.
The first part of my issue are the random BSODs which also started happening for a while I was getting a warning about Intel Rapid Storage that I never bothered to read, and eventually it just went away after I did updates.
But this computer has just randomly shut off while I was using it, not crashed, just lost power.
We have a computer that went BSOD this morning on startup. (Windows 8.1 PRO 64 bit) From what we can tell, nothing has changed since last Tuesday/Wednesday. It was shut down every night and restarted everyday for the last 5 days.
This morning, it starts up through normal boot process, shows Windows 8 icon, we hear the start up tune and then it goes black and then BSOD.
I made a recovery USB stick with another computer running Windows 8.1 PRO 64 bit. The problem computer then boots up the USB and we run the repair options and nothing worked.
We went through the command prompt bootrec /fixmbr and associated steps. No go.
We are getting stuck at what to do and are looking at reinstalling. We have a Windows 8.0 license, so Windows 8.1 upgrade is not refreshable or reinstallable at this point. When I went to reinstall Windows 8.0, of course Windows 8.1 is locked.....
Windows 8 worked great until I shut it down, went to turn it back on and it is HIBERNATING. I shut it down, took the battery out, left it plugged out, but when I try to turn it back on it just says "hibernating".
I have a DELL Inspiron 15 3521 running Windows 8.1 x64. Whenever I wake up the computer after hibernating my webcam is not working properly. A yellow exclamation mark is shown on the entry "Intel 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D" under USB Controllers in Device Manager.
i have problem with my dualboot. When installing ubuntu 13.04 and window 8 along each other, windows 8 won't hybernate (screen just gets blank and lock itself), tha same with turning computer off (when fast bootup is enabled). When i recover mbr using bootrec.exe /fixmbr (basicly switch back from GRUB2 so i cannot boot into linux) everything works fine.
One thing I noticed about Windows 8 is that there doesn't seem to be an obvious way to put my laptop into hibernation. For clarification, this means that that everything that is loaded into the RAM is written to a file on the HDD. The device then fully powers down. Upon pressing the power button again, the device will resume, similar to the way it does in sleep mode, but without have the power drain associated with storing the windows session in the volatile memory.
I went into the power settings and enabled hybrid sleep for both plugged in and on battery, but when I clicking on the power option in settings (by using the shortcut Win + I or by moving your mouse to the bottom left corner of the screen) there is only an option to put it into sleep mode. I know that it isn't doing hibernation because when it goes into hibernation, you must press the power button to bring it out of hibernation. I want it this way to reduce battery drain and to prevent accidental resuming if the laptop somehow opens while in my backpack...
So earlier I installed Windows 8 over Windows 7 (upgraded), and it was running almost flawlessly at first. I needed to update some drivers so I restarted my computer. It booted up just fine, however I could not access the login page at all. It was just a blank blue screen (not BSOD), and my cursor which I could move around.
I thought that the upgrade was the problem, so I eventually got around to dual booting Windows 7 and 8. The same thing happened, with it working fine at first, restarting the computer and facing the blank blue screen, not able to access Windows 8.
I installed a clean version of windows 8 on my PC over the weekend and since then when I start it up it gets to the load screen and shuts down. When I start it up again it works fine. I have a Gigabyte GA-Z77X-UD5H motherboard, I went to their site and downloaded the latest drivers for ethernet and chipset.
I close my laptop before going to bed. And some mornings I wake up, and open my laptop, only to find out that it has shut itself down while I was sleeping, and now windows wants me to send an error report. This has been getting rather annoying.
I turn my computer on hibernate mode at about 10pm, and then at around 3am my computer turns on. I don't turn it on, just when I wake its on (I check the Event Viewer to see what time it turns on). I thought that hibernate mode was zero power, so how would it be able to turn on? Is there a setting saying that it should turn on at that time?
My laptop running 8.1 Pro Preview continuously goes in and out of hibernation every 3 minutes or so. Occassionally a reboot with solve the problem, but if I step away and the screen saver comes on the hibernate cycle starts up again.
When I lock my screen and leave my computer to do tasks while I'm away, the computer goes into hibernation after an hour or so. I tried fiddling with the power options, but no joy. I need to have my computer running while I'm away as I have it doing tasks like rendering video etc. I cannot have it go to sleep!