Connecting To WiFi Network On Windows 8.1?
Mar 20, 2014
I have a HP Envy laptop running on Windows 8.1 (did not update. it came with it)
I have never had a problem connecting my house's internet network.
However, today i woke up, i turn on or restart the PC. it was already on, and i tried using the internet, i wasn't connected.
I lsearched for my wifi network. didn't find it.
Restarted the PC and tried disabling and then re-enabling the adapter, still couldn't find it.
Rebooted the router. nothing happened. I even reset the router and still couldn't find it. (firmware up to date) (Netgear)
This only happens to my Windows 8 PC. All other devices (PCs, Phones and tablets...even the TV) are working fine wirelessly.
That's why i posted this on Windows 8. The PC works perfectly using an ethernet cable.
View 14 Replies
ADVERTISEMENT
Jan 16, 2014
I bought Windows 8 when it was released, like most people I liked the performance upgrades and other stuff, but that was about it. Months later I installed Windows 7 again, but it just felt old and there were a few things I missed about Windows 8, anyway yesterday I decided to install Windows 8 again (8.1) but I'm having a problem since I did.
Whenever I connected an external hard drive via USB3.0, Wi-Fi would disconnect. I searched this over to see if other people were having the same issue, there were some guys but they were using a USB based Wi-Fi adapter, I'm using the one in the laptop.
DETAILS
Asus U47A
Wi-Fi adapter: Intel Centrino Wireless-N 2230
External Hard Drive: Seagate Expansion Portable Drive (500GB, USB3.0)
OS: Windows 8.1 Pro, All updates (Problem happens with or without updates, with original (Asus) or Windows supplied drivers)
I was loosing the Wi-Fi connection and I didn't know why, it was very intermitent, it would work for 10 minutes and then not, I then downloaded new drivers, directly from Intel, Asus and then using the Windows Update, it didn't work in neither case.
I was watching youtube and noticed the signal was good, it was working fine, and realised that the Seagate HDD was disconnected, I had just isolated the problem.
I tried to replicate it and indeed it happened, whenever I connected the drive, signal would be lost. At first I thought it might be a hardware-based issue, but it was working fine with Windows 7, so I decided to play with it a little more. I found out that Wi-Fi connection wasn't being lost, but rather loosing power, Windows would only display the closest routers (two, out of five or six that are in range). So I enabled internet sharing in my cell phone, guess what? It worked fine, signal was strong.
I connected the Seagate drive to a USB2.0 port, no problem. Then connected a different HDD (USB2.0) to the USB3.0 port, no problem.
So the thing is that Wi-Fi loses power when the USB3.0 HDD is connected to the USB3.0 port.
View 6 Replies
View Related
Dec 21, 2013
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies
View Related
Apr 28, 2014
This is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
View 4 Replies
View Related
Jan 23, 2014
Wifi worked, walked away for 10 minutes, then found that it didn't. I would normally just reset the router, but I live in an apartment building and the router is in my landlords office.
When I did ipconfig /all, my ip started with 169, which I know isn't normal. But when I try to do a /release and /renew, I get the error "No operation can be performed on local area connection *14 while it has it's media disconnected." I am unable to attempt a wired connection, as the router is not accessible to me.
.I'm not sure if this is a router issue, or an issue with my laptop (less than a year old.) I am a grad student and I currently have to do most of my work via my iphone, which is getting very inconvenient.
View 3 Replies
View Related
Jan 26, 2014
I have two desktop PCs connected to my router, one named Mirabel running Win7 Pro, and one named Bessie running Win Server 2008 R2 (both 64-bit). These can see each other quite happily.
I just installed Windows 8.1 Pro 64-bit on my Dell Vostro 3750 lap top, which I named Rosie, but am having problems connecting to the other machines.
When I go to the Network node in Windows Explorer on Rosie, I can't see either of the other two machines, but if I type Bessie in the address bar, it shows me the two drives that are shared. However, if I try and explore either of these, I get the following error...
The laptop is part of a workgroup, imaginatively named "Workgroup" as are the other two machines...
I changed the properties of the TCP/IP v4 to match the ones on the other two machines (with a different IP address of course) but this didn't work.
The odd thing is that I can browse the shared drives on Mirabel without any problem. In case it's relevant, both desktop machines can browse Rosie without problems. Windows 8 has changed so much from Win7, and it's wasting a lot of time trying to get it set up.
View 7 Replies
View Related
Jun 23, 2013
I have a neighbor who has an OPEN network called @HOMED689 . For some reason my Windows 8 machines keep trying to connect to this SSID automatically.
I've never tried to connect to it. Once it's connected however, with limited connectivity, I don't have the ability to right click on it and say "Forget this network" or do anything to it such as when I connect to another wireless it says:
Show Estimated Data Usage
Set as Metered Connect
Forget this Network
View Connection Properties
Nothing.
View 7 Replies
View Related
May 2, 2014
recently my PC updated when I didn't want it to and now it installed the update 1 "patch" for 8.1 and now my internet driver is screwed up. I tried to remove it now but the network still won't connect. My network driver is the Killer network. I also tried to restore but apparently my PC never made an automatic save. Now what do I do?
View 2 Replies
View Related
Jun 16, 2013
Sometimes when I boot up my computer the wired network doesn't connect. I cannot connect to it unless I reboot my computer. Then iti works fine. The connection seems random and sometimes it works and other times it doesn't. If it does connect there is never a crash or error of it not working.
I have the asus P8Z77-V PRO
I disabled my wireless adapter to try but still same issues.
View 9 Replies
View Related
Feb 4, 2014
My friend got a new computer and is trying, unsuccessfully, to connect to a network printer that he says he has used in the past, in his one man office. He gets his internet access through a wireless router. But the printer is connected via Ethernet cable to a second router that does not have internet access, but does have two printers connected to it.
So his new computer is connected to two different networks, the wireless network, and the wired network. I'm not familiar with having your computer connected to two networks simultaneously.
So my question is, is there any problem doing it like this, and should the network printers show up when the computer does a search in Add Printer? Because it does not find anything right now, not sure if we need to be looking at the printers, the router, or the computer.
He is not able to connect the printers to the wireless router, they are in different rooms. And there are no other computers connected to either network right now.
View 1 Replies
View Related
Feb 6, 2014
I have a Dell Inspiron 660s running Windows 8.1, and I just did a full boot of Ubuntu 13.10 onto a Dell Optiplex 330 that was previously running Windows XP. My goal is to connect to the internet by using the 660s as a bridge to the internet by connecting the two computers with an ethernet cable.
The level of difficulty: My internet requires you to log into it on a separate browser log in page similar to those in airports and other public Wi-Fi access points except that it requires a username and password to log in. My theory is that if I first log in to the internet on my Windows machine then I can connect to it by simply opening a connection from the Ubuntu OS to the Windows OS. Am I off track here or am I on the right track?
View 1 Replies
View Related
Apr 17, 2013
I have connected my ipod touch 4g to my new windows 8 laptop via bluetooth. It shows up in both the ipod and in the windows settings as being connected. However, once connected, i am unable to do anything with the connection.
There is no Windows tile showing the ipod, no obvious options in the ipod for how I can do anything with the connection, nothing. What am I supposed to be able to do once I have connected them via bluetooth? Is there a step I'm missing? I've read you can stream podcasts to the computer, for example, but there's supposed to be a windows tile showing the ipod which I'm definitely not getting either in the start menu or when I search.
View 1 Replies
View Related
Apr 13, 2014
I'm using Windows 8.1 for couple days and I connect to the internet using a pppoe connection,at first dial ALWAYS GOT
THIS ERROR : "The modem or other connecting device has reported an error"
AT SECOND always works.
View 2 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Mar 28, 2013
I brought my laptop to work and wanted to connect to my work's network so I could access our shared networks. In the past I was able to log into my work's domain, nahrc, with my user name and password via the ctrl+alt+dlt method fromt he log on screen. I can plug in the ethernet cable into my laptop, and the nahrc network appears in the wired connections area, but I can't seem to connect/access our shared drives. Is it possible to log into my laptop like you could in windows 7 and access my account, or is this just not possible anymore.
View 1 Replies
View Related
Mar 3, 2014
I am connected to my router by a Ethernet cable. can i still connect to my printer wireless?
View 7 Replies
View Related
Oct 27, 2013
I have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies
View Related
Apr 4, 2014
For some reason I can connect fine when I plug in my wireless receiver port into it, But 30 seconds after I plug it in, the bars disappear And a red X appears over it, if you click on it it'll say no networks found.... The only way to fix it is to plug it in and after 30 seconds it happens again...I'm only getting this on my computer, And it's gotten really bad recently, I've tried replacing the reciever, But that fixed it for maybe an hour....
View 4 Replies
View Related
May 6, 2013
Have a question regarding "Local Account". I'm having problems connecting to the Win 8 laptop from Win 7 as it will not accept my sign in credentials. With that, am I to assume that this is because the credential aren't "Local", and thus this is what this is for???
It will not accept the "Microsoft" account I use to log into Win 8 laptop.
With that, if I choose to go with the "local account" can I easily switch back to the Microsoft one?
View 8 Replies
View Related
Sep 15, 2014
I have a friend who has win7, which makes the hotspot that I can not see on my Windows 8 and all other friends who are on win7 can see the connection.
View 3 Replies
View Related
Oct 23, 2013
I upgraded my Windows 8 PC to Windows 8.1 yesterday and I am unable to reconnect it to my Homegroup (comprising of 2 Win 7 machines) or in fact get any communication between the Win 8.1 machine and the Win 7 machines. Prior to upgrading the Win 8.1 was part of the Homegroup. From the Win 8.1 machine: it initially detects the Homegroup as shown below,
it then asks me to choose file types to share and then asks for the Homegroup password which is when I hit problems as shown below:
In advanced sharing I have all 3 network types set to discoverable.
As part of the debugging process I discovered that the Win 8.1 was not time synced to the others, when I attempted to sync the time from the various time servers in the Windows drop down box I found the Win 8.1 encountered errors and would not sync. I was eventually able to sync it to time-b.nist.gov.
The other odd thing is that the keyboard does not work properly, specifically the characters above the numbers on the numeric keys are not correct, for example press shift 2 gives # instead of @. Have a suspicion these 2 things are somehow related.
View 9 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Jun 9, 2014
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
View 8 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Jul 18, 2013
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies
View Related
Jul 24, 2014
When you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.
View 8 Replies
View Related
Dec 7, 2012
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
View 3 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
Feb 27, 2013
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
View 9 Replies
View Related
Jun 23, 2013
I just bought a msi s30 laptop yesterday. So everything went fine when I test the wifi connection before I go to sleep. When I say fine, I mean I could connect to the internet. Then when I woke up this morning, I turn on the wifi but it says "no network found". I check the router and it is working perfectly fine. I also checked the device driver and its also working properly.
View 5 Replies
View Related
Jun 9, 2014
I am trying to setup a wifi hotspot in my Windows 8.1
I have been trying to do this manually in the Command Prompt as all the proprietry systems 4 No) I tried all failed after about 12 hrs
I used the following command "netsh wlan start hostednetwork mode=allow ssid=NAME=password"
And obtained the correct response
I then typed "netsh wlan start hostednetwork" and got the following response
" The hosted network could not be started
The group or resource is not in the correct state to perform the requested operation"
How can I determine what this means and how is it resolved
I did check using the command prompt that this was possible with the computer and received acknowledgement
View 8 Replies
View Related
