I have a new Asus S200 noteboook and I'm trying to get used to it. I have burnt a repair DVD but I now want to test it. It seems that the usual means of getting into the BIOS no longer work, so how can I boot from the DVD?
Running Win 8 64 RT.
In Advanced Startup there is the option to boot from a removable device.
It has an icon for a usb drive & a disk, which I assume means CD or DVD.
The question is, is this option the same as setting the boot order in the BIOS ?
I tried it just to test it & when restarting, the process hesitated like it was looking for a removable device. I had no device inserted.
Then my computer continued to boot like always. I was wondering if choosing this option would be a one time event or if it would change the boot order permanently ?
I'd like a feature in a Bios to enable an ISO on the HDD to be a selectable boot device.
Some MB's have a small Internet Browser built in to the BIOS which can be activated at boot time before loading the OS.
Perhaps even if loading a file system into the BIOS wasn't possible perhaps by selecting this type of option in the BIOS Windows could issue a prompt for the ISO once it could read the file system before loading the rest of its code.
My Windows 8 desktop PC was working fine up until yesterday when it wouldn't recognize my external dvd drive for some reason. I tried some troubleshooting steps such as deleting the upper and lower filters in the registry editor and everything was fine until I rebooted my PC.
Upon rebooting, I noticed an extremely long boot time (about 10-15 mins) which I found highly unusual but the computer worked fine until I rebooted it a 2nd time. The 2nd time after rebooting it, it was stuck at the HP loading screen so I left it on overnight to see if it would take longer to boot but to my surprise, it was still stuck at the loading screen when I woke up this morning!
Here are some specs:
OS: Pre-installed Windows 8
Model: Hp Pavillion p7-1459
All drivers should be up to date because I frequently run windows update.
I've made some configuration error but I can't remember what. I have a SD card with recovery drive on it which has been sat in my card reader for ever. Yesterday (I'm not sure if this is related) I was trying to make a Windows to go drive using 8.1 Enterprise Preview in a VirtualBox VM. This was to be on another USB key and didn't work as it was incompatible. This key is not in the machine.
Anyhow now when I restart I always boot to the SD card recovery drive. I have to take it out to boot normally.
BIOS shows C:/ top of boot order and msinfo shows C:Windows is the default (and only) boot entry.
Just installed Win 8 on a new hard drive. "Almost" everything works fine. However my scanner, colorimeter and a couple programs are not compatible. I do not need to use the incompatible hardware/software very often. But when I do, I would like to boot the computer into XP and use them. I've done some research on this topic. Partitioning the Win 8 primary drive does not appear to be an issue. But, can I dual boot 2 operating systems if Win 8 is now the primary and only OS on the HD?
View 6 Replies View RelatedYesterday night I upgraded my PC to windows 8 with an old windows 8 installation media. Everything was going fine and i also restarted it yesterday but today morning when I powered my PC it went through the Dell Splash screen but after that the screen freezes with a black screen and after 1-2 minutes It restart and again the same thing happened.
View 7 Replies View RelatedI just bought a 16GB kit (8GB x 2). I put both sticks of RAM into my PC and it does not boot, nothing is shown on the monitor, no beeping noise, no error message. I used another PC and got the same thing. After trying out the RAM one stick at a time, I found one of the stick is causing the boot issues. If I used that stick of RAM on any of my 2 PC, it won't boot at all.
Is this RAM not compatible with my PC or is the RAM defective?
my computer has suddenly starting acting up:- I cannot enter my password due to no response via the keyboard I am using a MS Comfort 500 keyboard & mouse but this isn't the main problem as if I can open up the computer (and I can now and then) the cursor is very jerky and unresponsive, but now things have got a whole lot worse the computer is starting up in repair mode (didn't know this existed) but cannot repair itself so gives me the options of refreshing or resetting, now resetting seems a bit drastic as although I have my files on external discs and in the cloud I have never done a restore point and it seems as though a disc my have failed but as I cannot get into the computer I have no way of doing any other checks it could have been a virus that caused the problem, wish I had created restore point, if I do a reset I will loose all the programs on the c drive.
View 16 Replies View RelatedMy laptop was infected. So I used Malwarbytes and Hitman Pro to remove the infections. Then I updated it from Windows 8 to Win 8.1. After the upgrade finish, it rebooted and now only boots into SysPrep. I can't even boot into Safe Mode, I get an "installation needs to finish" error.
Also, once it logs into SysPrep, I log out of Administrator into my user account and use "net user administrator /active:no" command in Command Prompt and reboot, but still it boots into SysPrep.
I've also tried using msconfig and set it to Normal Boot, but again it restarts into SysPrep.
I'm assuming the Win 8.1 upgrade glitched out.
I have installed the full windows 8.1 on computer i restart my PC and it was all going normally until it reached the "getting windows ready" screen for half an hour and nothing happened.
View 5 Replies View RelatedIt's not just your everyday slowness. I accidentally dropped my computer, not too violently or anything, and now it's having extreme lag.
Even before you boot, it takes about 3 minutes just to wait for the safemode options screen after hitting F8. So far, it's taken 20 to actually load the files and start safemode.
The only thing I can think would be causing this is the RAM cards were damaged? Or it might also be a softwear issue - I was running a high memory video game when it fell and shut off.
I have a Samsung 64 bit Notebook with Windows 7 Home Premium.
I have an alienware laptop running windows 10 tech preview on the main os drive and then a data hard drive, i have a fixed size VHD file stored on my D drive which is 60g so I boot to windows 8.1 setup and i mount the VHD, i go through setup like normal creating a new partition on the VHD and going foward like normal.... then it reboots like normal and trys to boot into windows 8.1 but i get an error saying that it cant find winload.efi with code 0x000000e i think it was......
View 4 Replies View RelatedEvery time I boot win 8 says my password is incorrect and I have to manually type it in order to continue booting. I Am using Classic Shell. I dont want my laptop to ask for a password. With Classic Shell installed I got rid of charms bar and now I don't know how to make my laptop stop asking for a password.
View 9 Replies View RelatedI just installed Windows 8.1 Pro on a new SSD(did the install with the other drives disconnected). I have another one with Windows 8 Pro installed on it and a HDD for my files.
When I boot, Windows 8.1 is loaded automatically and afterwards, I can see the partitions in disk management for each drive.
Is there a way to have a choice of which OS to load at startup?
BioStar Hi-Fi A85W Socket FM2 Motherboard - ATX, Socket FM2, AMD A85, DDR3 2400 MHz (O.C), SATA III (6Gb/s), RAID, 8-CH Audio, Gigabit LAN, USB 3.0, PCIe 2.0, CrossFireX Ready
AMD A8-Series AD560KWOHJBOX Quad-Core A8-5600K Black Edition APU - 4MB L2 Cache, 3.6GHz, Socket FM2, Radeon HD 7560D (256 Cores), Dual Graphics Ready, DirectX 11, Fan, Unlocked, Retail
Kingston HyperX Red KHX16C9B1R/4 4GB Memory Module - 1600MHz, 9-9-9, DDR3, CL9, 1.65V, Unbuffered
Toshiba HDKPC03 DT01ACA100 1TB Hard Drive - 1TB, 7200 RPM, SATA, 3.5"
Window 8 64 bit.
I recently put this computer together as a cheap media machine. Everything worked. It connected via onboard NIC to the internet, it had sound. No problems.
Then I upgraded by adding another stick of RAM. Same module 4gb. and all hell breaks loose.
I lost lost and internet. Media sound service couldn't start. Said something along the lines that found new hardward. And it wasn't communicating with my NIC card anymore.. I tried updated the drivers. No joy.
I contacted Biostar and asked for an issue. They recommend me to update drives and then reset bios setting to factory defaults. I tried that. No joy.
I then RMA's the vendor and got another mobo. Installed it and it had the same issue. No sound no internet.
Last nite I decided maybe I should just reinstall windows, but now my computer freezes on the bios screen.
attempting to setup a dual boot with Win 8.1 and Win XP.
Just a quick break down of my current setup:
a) Win 8.1 x64 is currently installed on my SSD on C: drive partition b) On a different SATA hdd I have an old Win 7 x64 installation that I'm not using any more on one partition
I simply want to replace my old Win 7 x64 installation with Win XP. Why do I want to install Win XP you may ask ? The answer is simple, I want to play some older games that aren't fully compatible with Win 8.1 x64 and neither run good in a virtual machine environment on Win 8.1.
The only thing that is stopping me from attempting this is, has to do with the Win 8.1 bootloader. I simply don't want to lose my bootloader, and I'm afraid that when I install Win XP it might overwrite my Win 8.1 bootloader which will most likely leave me without gaining access to Win 8.1. At the moment the Win 8.1 bootloader lists along with Win 8.1 my old Win 7 x64 installation.
Given my setup of hdd's up top, what would be the easiest way for me to load Win XP on my old Win 7 partition that will still allow me to have the Win 8.1 bootloader with a Win XP boot option on the bootloader menu ?
Should I disconnect my SSD and then proceed to install Win XP on the Win 7 partition and then afterward reconnect my SSD and then using EasyBCD add an entry for Win XP to the bootloader? Or will I run into an issue along the way?
I am looking into setting up a type 1, native hypervisor on my desktop (Xen, specifically). Would it be possible for me to load my current install into a VM? The hypervisor can be run from a live disk.
View 1 Replies View RelatedWas Wondering because When I used to do it on windows 7 I would Choose Install along side windows but it seems after installing windows 8 Grub Boot Loader is getting bypassed.
View 5 Replies View RelatedI Have a CPU it was Windows 7 Home Premium installed , i Got windows 8 downloaded from Microsoft . I installed it without a CD . I Extracted the .iso file and Just Click Setup.exe , it was really slow so i left it at my house , when i ome Home it enters windows 8 Home Screen . I am really confused , i thinks its gonna ask me Custom or Upgrade but when I'm home it just ask me what color do you want for your theme . I Inserted the windows 7 CD and Installed on drive B: ( B is a hard disk i made with diskmngmnt.exe ) and it boots to windows 7 , i want to shut down my CPU . I turned it back On ( Restart ) and it just shows me a black screen .
View 4 Replies View RelatedI have a friend who has tasked me with removing the dreaded "Interpol" scareware virus from his Windows 8 laptop. Sadly, this means he can't boot into Windows 8, as the virus just locks him out. How can I boot into Safe Mode, so I can run the "Power Eraser" tool from Norton (handy tip!) to remove it?
If this can't be done, how can I tell the PC to boot from the DVD-Rom drive?
Computer: Dell Inspiron 530
Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit.
BIOS Rev. 1.0.15
Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1
Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
I've got Windows 8 64 bit and I'm running it on a Gigabyte U2242 ultrabook on the max resolution 1 Yesterday, after booting up, I saw that the desktop is black, the icons are black/ invisible too, I can, however, see the taskbar.
On the other hand, the tile menu works just as intended.
The laptop has two video cards: Intel HD 4000 and a Geforce 650M, I've uninstalled the drivers for both under safe mode and reinstalled the latest ones.
I've read somewhere on the nvidia forums that the geforce driver can't be removed because v.304 comes with Windows 8. Is this true?
i am now aware that normal booting only achievable when my USB printer is disconnected.
Can't begin to understand what is happening here.
Asus P8Z68-VLX / Intel i3 2120 / Win 8 Pro 64
I am sitting with my computer for weeks. When my computer boots with the DVD, it shows Windows 8 logo for 30 seconds, then shows this:
Your computer needs to restart.
0x0000000A
BTW, I am now running Windows 7 fine on this machine.
I have a customer with a pc that has an abundance of viruses, and to remove them, I boot into a program located on a flash drive.
However, when I boot into the flash drive on this pc, it loads the program, and then freezes. Nothing moves, no key pressing will make a difference.
I've ran SFC and CHKDSK, which had located some corrupted files, but failed to fix the issue.
How difficult would it be to dual boot / put Ubuntu on the Dell Venue 8 Pro as a secondary os?
Would grub work on this tab?
How stable would it be?
I have an external hard drive connected to my PC via hard drive dock on USB 3.0 port. Whenever I turn my PC on with the hard drive connected, my PC won't boot up because it is trying to boot up from the external hd where I have an image of both my Win 7 & Win 8 OS. How can I stop my PC from booting up from the external hd?
View 9 Replies View RelatedIn the past week I've suddenly started having a lot of problems with my Gigabyte P35K-CF2 laptop (purchased in Dec 2013, OS Windows 8.1 64-bit). At any given time regardless of what I'm doing with it, the computer will freeze for a couple of minutes max. The mouse cursor still moves but I can't click anything and the keyboard won't respond.
In addition, during startup the computer may get stuck in a loop of errors and reboots (the errors include INACCESSIBLE_BOOT_DEVICE and IRQL_NOT_LESS_OR_EQUAL, sometimes with iaStor.sys). The startup time has also increased significantly from when the device was new, from sub 10sec to around half a minute.
The laptop has always been in AHCI SATA mode before all this started. After the freezes got more frequent and I manage to boot to Windows like once in every ten tries, I figured I should try to reset the Windows installation. After firing up the laptop I went to the recovery menu where you can refresh, reset and so on. I tried to initiate the reset feature a number of times but every time it complained that the recovery partition is missing. After that I somehow managed to boot Windows and went to create a recovery drive with the utility found in Windows. It managed to copy the laptop's recovery partition into a spare external USB hard drive I had. Then I restarted, changed the boot location in BIOS from the SSD to the external hard drive and tried to initiate the reset function from there, and somehow it started the process and Windows was reset correctly. However, the same freezing and error/boot loops persisted and kept getting worse, so I tried resetting the Windows installation from the system's own recovery partition with IDE SATA mode selected and somehow that worked but then I got into the situation where I am now - after downloading the 8.1 update Windows won't boot at all.
I've always installed updates via Windows Update and Gigabyte's Smart Update, and have never deleted anything from the boot SSD's Windows folder. The recovery partition seems to be there but with AHCI selected the reset feature won't recognize it. Actually, I don't know if resetting the system will even fix my original problem (the freezes and boot loops). I don't have any other Windows installation media.
I'd like to dualboot between W8 & Linux, I currently have W8 installed. How to?
RIG
Intel Core i5 4440 CPU
ZOTAC GeForce GTX760 2GB GPU
Gigabyte H87N-WIFI Motherboard
Toshiba laptop. My son tells me ever since he went on you tube, he has pictures coming up Like wallpaper, with a field to type in where he wants to go, like the address bar in IE.
This worked for a while, but now the computer will boot it shows - welcome Glenn and the circle is spinning, but it will not display the start page. It stays black.
BTW he is running win 8. After about 5 minutes I am able to hit alt-Ctrl- Del and I managed to bring up task manager.I found that the CPU usage is at 98%. I shutdown the windows defender module, and it dropped to 48%. After exiting task manager it still does not display the desktop.
After several tries it is now a little faster and I can get to task manager without a long wait, and the cpu usage is down to 10-20 % , but still no start page.
After the computer sits for a while it goes into standby, I know that because after I move the mouse, I will see the space needle picture. After I click on the picture, it goes back to black.
Since I cannot get to the desk top, I cannot run anything, so I don't know how to proceed.