Audio :: Windows 8 - Front Mic Not Being Picked Up
Aug 30, 2013
I've had this problem ever since I upgraded to Windows 8.
I was initially a Windows Vista user, and this headset worked perfectly fine on the Vista Home Premium OS. However, ever since my upgrade to Windows 8 Pro the microphone refuses to pick up sound.
I have done everything from uninstalling and reinstalling the drivers, Realtek specifically to plugging it in through the back of my tower. I can say without a shadow of a doubt that it is not a hardware problem, as I use this same headset with my Xbox 360.
I've gone in and changed the settings via the sound menu, I have done literally everything I can find thus far. The microphone is detected, however there is constantly one bar of sound pick up from the microphone. My voice isn't even picked up from the Microphone set up menu. I've unmuted the front mic through the sound menu as well, but I still get nothing. I've reset everything to default countless times, and I still get no results.
The headset I am using specifically is the Red Samurai Xbox 360 Stereo Headset.
I have a Gigabyte GA-F2A75m-HD2 (Rev 1.0) board and this is quite an odd one. The front port worked with Ubuntu and other Linux distros but it seems to be the opposite case with Windows 8.1. I installed the latest Gigabyte version of the Realtek HD Audio Manager but it still doesn't work. What should I do?
i've been having this problem since I THINK starting to use a HDMI wire. But now, i cannot get any audio from the audio jacks, they are detected, but no sound is produced and I just cannot figure it out. I've disabled the HDMI, installed, un-installed, re-installed audio drivers and pretty much any method and i can find thus far and nothing at all has worked. I'm a huge lover of music, and the is driving me insane!
Note: The speakers are fine, they work with my iPhone.
I've installed windows 8 yesterday and noted that front panel audio doesn't work (I use a headphone) connecting the headphone to back jack it's work but front not.
It's a Intel HDA, and using windows's default driver.
Yeah so my front panel is connected to my board but im still not getting any sound Usually in the good'ol versions i would disable front panel detection from the realtek driver utility but i dont have that on this computer
i have windows 8 professional installed.i have a ECS G31T-M7 board. i dont get sound from the front panel of the cpu. i tried updating the sound driver but still no use.
Start up laptop - select to go to desktop dropping back to windows 7 looking desktop - after a bout 5 secs, refreshes itself so you can never select anything or breakout...
I have 16GB of unallocated space in front of System Reserved. I was wondering if there is a way to move the System Reserved to the front. I've used GParted before and I'm guessing I am going to have to make a backup of the C drive and then move it around. (and I know, only 10MB free on C drive. )
This morning when I turned on my PC, I noticed these 2 weird icons appearing in front of my two drives (local, and backup disks). The 2 icons were not there before? They look like the standard Microsoft User(s) icon, but why are they suddenly/randomly appearing?
OS: Windows 8.1 Pro Processor: AMD FX-1400 Quad Core RAM: 8.00 GB Storage: 1.73 TB of 1.81 TB available System Type: 64-bit Operating System, x64 based processor
A while ago, my PC was having some lag issues that made the computer practically unusable. I found out in msconfig that I had almost all services running. I disabled many of the services, and I made sure not disable the necessary ones (i.e, Windows Audio.) I restarted my computer and there was a red circle with a white "X" over the audio icon. I clicked on the icon. A window named "Playing Audio" opened. On the window was a bar similar to the one shown while loading/downloading something. Above the bar said "Detecting Problems" and then "Scanning for hardware changes...". This went on for about 10 seconds. After this, the window changed. At the top in blue was "Troubleshooting has completed". Under that was "The troubleshooter made some changes to your system. Try attempting the task you were trying to do before." In the center of the window was "Problems found-Hardware changes might not have been detected".
In the search bar, I typed "Manage audio devices". When I opened it up, the window told me that there were no audio devices installed. I have checked in Device management under "sound, video and game controllers" That I have sound drivers installed (AMD High Definition Audio Device & High Definition Audio Device.) I have tried multiple times to uninstall/reinstall the drivers to no avail.
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
I've been trying to configure my brand new hp PC with Windows 8.1 pro to auto-sleep but I have been unable to do so. If it hit the power button or select sleep from the menu it will sleep, however.
I ran powercfg/energy and it appears from the report that this is the issue:
System Availability Requests:System Required Request
The device or driver has made a request to prevent the system from automatically entering sleep.
So about a month after I bought my computer,all of a sudden there was no audio comming from my headphones or speakers. i do have to say that windows 8 was a bit new for me because i was using windows xp the only way i can get audio now, is by plugging in a usb with bluetooth connection. even HDMI won't work. i'm getting no errors when running errorchecker.
Perhaps usefull info: -pc Model No: HP ENVY h8 PC series -running windows 8.1 -i have extra beats audio (for audio settings).
Last night I restarted my computer and for some reason when I booted it back up I was not able to use my headsets sound. I went through the settings disabling audio drivers and nothing worked, I also tried to change the default audio device but that wouldn't work either. For some reason I can't change any audio settings when i press OK and open back up the windows the settings are the same.
The thing that puzzles me that everything was working fine until I restarted my computer. I am also confused why windows won't let me change my default audio device under the playback devices menu.
How I would go about setting up two audio sources at once. I was hoping to use both my internal speakers as well as a Bluetooth connected HDMX Jambox. I know at the very least Windows 8 will output audio to both of the devices at once, as it will let me "Test" one or the other from the sound properties panel while I'm actively playing audio from a youtube video. The question I had was how to set them both up as default devices so that they playback the audio in sync.
So my sound works fine for almost everything, except AIMP3.
All sounds work,VLC,chrome,system sounds,etc......
Not sure why it doesn't seem to work for the application. I re installed the application and nothing changes.
Not sure if this is a driver/codec issue? It shows it as sound playing,but no sound actually comes out of the speaker. The same files also play on VLC.
Recently I decided to go ahead and update to the Windows 8.1 version of the Realtek HD Audio Driver. I procrastinated because it told me I'd have to uninstall the original audio driver and I knew it would take a while to do everything needed. It didn't work that after uninstalling the original audio driver, then restarting like Windows told me to do, I kept getting error messages that forced my computer to restart until eventually my computer let me log in and install the updated audio driver.
However, with the updated version of this driver I had the same issue I got with the original one only much much worse. The original Realtek HD Audio Driver that I had on my computer made music and videos sound absolutely awful when headphones were plugged in. I found out that this is because the driver automatically puts on so-called "enhancements" whenever headphones are plugged in. This was a very simple fix, simply go to "Sound", then under "Playback" you click on "Speakers", then go to "Enhancements" and check the box labeled "Disable all sound effects." Then sound through headphones would return to normal.
Well, with the Window 8.1 version of this audio driver, I can do the same thing, but it never stays that way. Every time I plug in my headphones, it resets back to having enhancements. The strange thing though is that it says the enhancements are disabled but when I reactivate the enhancements(No difference in sound quality) then deactivate it again, suddenly the sound through my headphones is back to normal.
Did the audio driver not install properly? Is there something I can do to permanently disable the audio enhancements?
Radeon HD5450 Samsung TV connected via HDMI to graphics card AMD HDMI High Definition Audio Device Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not work.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not work. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not work either.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not work.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
I need removing the SmartAudio application from my Control Panel. Every time I click on it, it says "failed to initialize" - I no longer have it nor do I need it. I would just like to get rid of it from Control Panel, it's not slowing my system down or anything, it's the OCD in me that is killing me seeing a non working function there!
When I watch YouTube videos I get random stutters where the sound skips. The image doesn't seem to freeze though, just the sound
I also get issues with the sound streaming music online, where it pauses for a second and stutters even though it's not buffering.
When this happens, NT Kernel & System shoots up in task manager and uses more CPU than the browser. This by the way happens in every browser, IE, Chrome or Firefox.
It doesn't happen when playing music in iTunes or watching videos from my hard drive.
That being said I'm not posting about a buffering type stutter, I am aware of that and this is not it. This is like basically suddenly the computer has a big spike in memory or cpu usage and the video/sound clip stutters for a sec. But it happens often enough to be very annoying. In a 15 min YouTube clip it happened 10 times.
I have reinstalled my IDT High Definition Codec and my Intel HD Graphics 4000 driver, but still the problem persists.
I have Asus All In One ET2701INKI, the problem is the microphone does not work properly, It has dense distortion and echo, microphone works in other devices very well.
I am using Windows Pro 64 Bit, and I have latest Realtek Driver, I have tried High Definition Audio but again no solution.
I have read that if I choose "Separate all input jacks as independent input devices" from Realtek Audio Manager's Advanced Settings, I am sure the problem will be solved, but I do not have Advanced Settings.
I have only: Display Icon Notification Window Enable Auto Pop Up Icon
I was trying to fix a problem, and then I removed some programs, and I think i accidentally removed a file that is needed for the dolby. Now I can't open it, and when I try it says that I could re-install it. But how?
I updated to 8.1 because supposedly, it was to offer features similar to win 7. Instead, it's even worse than win 8. Now, the sound quality on my laptop is lousy because the Dolby Audio driver receives an error message and isn't working. I went to Lenovo (I have a Ideapad N Series 580) and followed these instructions from Lenovo and microsoft, which unfortunately didn't work. I'm still getting the same error message. I wish I had never heard of windows 8.1! Many have had this same problem after installing 8.1. This instructions are from Answers.Microsoft, but didn't work.
Open Device Manager. (Right-click on the Start button and choose Device Manager).
Expand the Sound, Video and Games Controllers section.
Right Click on the Conexant Smart Audio HD item and choose Uninstall.
Still in Device Manager, click on Action>Scan for new Hardware.
The Conexant Smart Audio item will re-appear.
Right-Click on it and choose update driver.
Navigate to d:driversaudio.
When that's done, close Device Manager.
Open File Manager and navigate to D:driversAudioDolbyGUI and install Dolby Home Theater.
These instructions are from Lenovo and didn't work.
Two programs are creating audio outputs such as a game program and iTunes, I desire to send the game program to my headset while remain the iTunes audio to my default playback device, speakers.
I am wondering if there is audio management software. Similar to how if I am on Skype I can communicate through headset and hear them on the headset while the audio on iTunes by default is outputted through the speakers.
I want to play Nether and hear everything through the headset and keep music playing on the speakers so my girlfriend does not hear me play games.
So today I got a new acer laptop with windows 8. The laptop only has one audio/microphone input in it. When I first plugged the headset microphone jack into the singular input, it asked what device it was. I selected headset and moved on. Later, I could not find my headset mic in my audio devices/microphones. I could only see the computer default internal microphone.
I just bought a new pc and received it today, and i plugged my headset in to check if i hear audio from both speakers and headset but its not working. When i plug my headset in i only hear audio from my headset and not the speakers. Ive been googling and found something about it but with the newest realtek hd audio i dont have the Playback Device there, only the Recording Device. In this picture it has both the playback and recording device.
