Seems my windows will not backup anymore, it did not finish last backup. I tried to start a new one and just keeps giving the same error, last backup did not finish. I am backing up on a spare external usb drive.find the drive no problem. Give me something called error on the windows bit logger??
View 2 RepliesIm tryin to get my 64GB Mtron SSD runnin with Windows 7 but I can't get it to show up in the installation process. It shows just fine in the BIOS, in device manager, in My Computer and in Windows Disk Management, in fact I can even use it as storage but for some reason It will not show up as a disk to install Windows. I have tried as IDE in BIOS and AHCI and in AHCI mode it will not show up in the BIOS at all or anywhere, I can only get it to show in IDE mode. It has been fully formatted and has had Windows 7 on it here recently (had to reformat due to some speed issues). Does anyone know a way I can get Windows put back on, preferably in AHCI mode cause Im stuck with a Thousand dollar drive thats good for storage only
My board is the Gigabyte GA-EP43-UD3L with BIOS F8 which according to their site is the latest one. Processor Q8600 and 4GB of OCZ Flex RAM...
I have a Windows 7 Home Premium 64 bit computer which I will call the main PC. An HP LaserJer is directly connected to it, and shows up as the default printer. About a month ago, it stopped responding to print jobs. They show up in the "jobs pending" list, but do not print. If I try to print to that printer from another PC on the network, the document shows up in the pending list, but then says "Error" and will not print either.If I connect the printer to a different PC, it will print. If I try to print to the printer connected to another PC from the main PC, it will not print. The print spooler is running. There are only restore points from the past week or so, and this started happening over a month ago
View 2 Replies View RelatedI've only had my new computer with Windows 7 for just over a week and it won't work anymore. It goes into Startup Repair and says it can't repair this computer automatically. I press "Finish" and then it just restarts again showing the logo of the motherboard on screen and then goes back into Startup Repair again.
I called the shop where I bought it and they said it is possible I was loading too much software on too quickly. It is a computer I use for business so I wasn't loading any rubbish on and I didn't install that much - Office suite, antivirus, modem software, printer driver.
I'm in trouble with my monitor. I have one AOC 511Vwb LCD 15,6" Widescreen. The specs in portuguese:[URL] I've been using it... i don't know... for like 5 months, and it presented a couple of times an issue of not being recognized by my OS.
When it is recognized, i can set his native resolution to 1280x800 60Hz, but now the max resolution that i can get is 1280 x 720 and this resolution is very very weird on my screen.
So i tried to use it on two diferent notebooks, one using Windows 7 and one using Windows Vista and he worked perfectly only on the notebook with Vista.
And guess what, the monitor is "Vista Ready".
This problem happened before and solved by itself, and now passed 2 weeks and nothing to come back the way it should be. And since i've tried basicly everything i'm now "closed mind" and looking for new viewpoints.
Uninstall a program window does not open, the link is not working. How I'll open that window?
View 3 Replies View RelatedI did a clean install of my OEM Windows 7: Home Premium 64-Bit and i don't have the option to change my Windows color anymore, as i did before. I hate the way it's looking now... It's completely horrible.
View 2 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedI had my laptop running last night and I woke up this morning and my computer was frozen. It wasn't the "blue screen of death" as many mention as it was simply frozen but when I turned it back on (and continue to turn it back on) it gets stuck on "Starting Windows" without even proceeding to the Windows log-in screen. Next, when I launch a "system repair" it goes through the process but freezes in the blue "system repair" screen without even showing anything..just the blue background sunshine screen and is just stuck there...under "Advanced Boot Options" the "Last Known Good Configuration" gives me no luck either...I then try "Safe Mode" and under "Safe Mode with Command Prompt" it freezes while "Loading Windows Files" and the last file/driver it shows is windowssystem32DRIVERSAtiPcie.sys
I don't know what else to do...I have a Windows 7 64-bit boot disc but this is my small laptop which doesn't have a CD/DVD drive. I can use my USB drive if necessary but I attempted to do that but maybe there is some special way I must install it on my USB drive?
I had my laptop running last night and I woke up this morning and my computer was frozen. It wasn't the "blue screen of death" as many mention as it was simply frozen but when I turned it back on (and continue to turn it back on) it gets stuck on "Starting Windows" without even proceeding to the Windows log-in screen. Next, when I launch a "system repair" it goes through the process but freezes in the blue "system repair" screen without even showing anything..just the blue background sunshine screen and is just stuck there...under "Advanced Boot Options" the "Last Known Good Configuration" gives me no luck either...I then try "Safe Mode" and under "Safe Mode with Command Prompt" it freezes while "Loading Windows Files" and the last file/driver it shows is windowssystem32DRIVERSAtiPcie.sys
I don't know what else to do...I have a Windows 7 64-bit boot disc but this is my small laptop which doesn't have a CD/DVD drive. I can use my USB drive if necessary but I attempted to do that but maybe there is some special way I must install it on my USB drive?
Windows Search is not working anymore on my PC. When I search using the box in Start Menu and I click on "search everywhere", it appears Google Deskto Search page in my browser. I want to disable Google Desktop Search and have Windows Search as my default desktop search engine again. How can I do it?
View 2 Replies View Relatedwaiting for that driver mf626
View 1 Replies View RelatedLast night I updated my GPU drivers(NVIDIA) and 5 mins later after I had rebooted from the Driver install, I get a Blue screen.
I tried to reboot but it gets stuck at Windows 7 Loading screen(Windows logo and black background), after about 10 mins of being stuck, I get a Blue screen flash on the screen and it reboots itself, repeating the process over and over again.
I try to boot in safe mode, it gets to the screen where it says "Loading Drivers". Then it goes to "Please Wait" and it stays there for about 10 minutes again until Blue screen flash and reboot on its own.
After that I got frustrated and decided to just stick the Win7 installation DVD into the machine and do a full reinstall. However, after it has gotten past the first screen where it "loads the files from disc"(literally the first screen you get when you try to install Win7), it turns black and won't respond anymore.(Serious "wait what?" happened in my mind at this point).
Next day at work I spoke to some IT guys about it, they suggested it was a hardware failure and then other guy suggested it has something to do with the RAM, whether not working or the RAM slots on my MoBo are broken. Also said that Dual channel might not be working either then. I got instructed to try each piece(I got 2 sticks of 4gb ram) of RAM seperately to see if I can get Windows to boot to see if it's faulty RAM.(I got the same suggestion from the place I ordered my PC parts from)
I am by no means expert, I know the basics of computers, but this is just mind boggling. I might have had faulty hardware all along(Browsers are very laggy and slow) and Windows loads really slowly. The computer is only 6 and half months old.
Specs:
ASUS P8P67 WS Revolution MoBO
i5-2500k @ 3.3GHz
Kingston 2x 4GB 1333MHz Ram
ASUS GTX 580 DirectCU II
Western Digital Black Caviar 1.5TB 7200RPM HDD
Kingston 64GB SSD
Corsair 650W PSU
send me the drivers for the 3 g modem
View 2 Replies View RelatedThe problem appeared in two different laptops (Lenovo and Fujitsu). The bluetooth hardware is not visible in device manager anymore, but unrecognized device appeared. Driver reinstall doesn't help. Driver installation setup says there is no bluetooth hardware. PC Suite is installed , worked fine before.
View 1 Replies View RelatedI changed my Windows start sound a while back.After updates some time ago, it changed back to the original.I decided to change it back the way I wanted it and opened up the imageres.dll file in the Windows System32 folder using Resource Hacker.I found that the Imageres file still pointed to my sound file and when I hit play it, it played my sound.But my computer plays the default sound when it boots.I ran a search and found another Imageres file at this location...C:Windowswinsxsx86_microsoftwindowsimageres_31bf3856ad364e35_6.1.7600.16385_none_dc93f95659399ba8imageres.dllThis file plays the original Windows sound but will not let me change it even with Resource Hacker.I go through the process on a copy of the file pasted on my desktop, but while I don't get any error messages, it still plays the original sound after completing the process.
View 9 Replies View RelatedI recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies View RelatedI had my laptop running last night and I woke up this morning and my computer was frozen. It wasn't the "blue screen of death" as many mention as it was simply frozen but when I turned it back on (and continue to turn it back on) it gets stuck on "Starting Windows" without even proceeding to the Windows login screen. Next, when I launch a "system repair" it goes through the process but freezes in the blue "system repair" screen without even showing anything. Just the blue background sunshine screen and is just stuck there.
Under "Advanced Boot Options" the "Last Known Good Configuration" gives me no luck either. I then try "Safe Mode" and under "Safe Mode with Command Prompt" it freezes while "Loading Windows Files" and the last file/driver it shows is windowssystem32DRIVERSAtiPcie.sys. I have a Windows 7 64-bit boot disc but this is my small laptop which doesn't have a CD/DVD drive. I can use my USB drive if necessary but I attempted to do that but maybe there is some special way I must install it on my USB drive?? Otherwise I am completely stuck.
I'm never the one to ask, but I don't know what happened. I tried looking online but I couldn't find any solutions. It seems like all my icons (including folders) are not showing up in windows explorer, taskbar, or the desktop anymore. This isn't too big a problem, but navigating through my picture library is very complicated without thumbnails. My PC is pretty heavily customized. I also cannot open the start menu from the taskbar anymore. I click the startorb and nothing appears. Screenshots
Also, while I was uploaded the three screenshots to imgur, the icons showed up on the popup to windows explorer.
my download dialog box won't appear anymore, instead a thin rectangular white box with yellow trimming pops up, and it will say its going to run/open/ or save something, but it doesn't.
View 4 Replies View RelatedDoes anyone know of a tool or a command that free's up memory that isn't being used anymore on Windows 7, similar to the purge command in terminal on a Mac?
View 5 Replies View RelatedCurrently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies View RelatedWindows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
I have a portable with windows xp installed on together with pointsec security software. I decided to install windows 7 on an external e-sata harddisk to keep my work harddisk (xp) apart from my personal harddisk (windows 7).Now I can't boot anymore with the internal windows xp because windows 7 seems to have overwritten some boot files on the internal HD altough I did tell windows 7 to only install on the external HD. I guess that windows 7 installs it's bootloader on the internal harddisk.How I can I restore the original bootloader to the internal HD? Please note pointsec security software was installed on the internal harddisk.
View 4 Replies View RelatedI can't get use of my OS anymore, it boots up in repair mode then says it cant automaticly fix these errors. So I can't get into the system to get my files, and when I attach the Hard drive as a Slave, it looks as if all my files have dissappeared! This is the error details, there was (2) errors: [code]
View 3 Replies View Related