I think my computer got a virus. It was working fine until i shut it down. I tried to turn it on the next day and it said something like "windows is trying to repair the problem" or something like that. I tried to restore it to an earlier date but the same thing kept happening, so I just decided to use the repair disks. I clicked the "recover to out-of-box" state and it started loading, then suddenly a window reading ," recovery factor default software" popped up, following with a smaller window titled , "Copy File" and reading. "Invalid MS-DOS function.PREINST7.SWM Type:SWM File.Size: 643 mb.date modified: 9/3/2009 2:11 am try again, skip, cancel " I have a Toshiba L455-S5975 Windows 7 home premium 32 bit What does this all mean, and more importantly, what do I do?
I am trying to recover my ASUS K52D Notebook PC to factory settings. I am currently running Windows 7 operating system. I do have the Driver & Utility Ver.1.0 disk, but I have lost the System recovery disk that was made by the store where I purchased my laptop from. I have tried recurring it using the partition file thing that's on my computer, but I received an error message. I am wondering, is there a way to recover my Notebook to factory settings without using the partition or the recovery DVD?
I have just recovered my laptop toshiba satellite L505 es5018 windows 7 home premium 64bit to factory settings successfully. After that system start up but keep configuring system continuously. How may I solve this problem?.
My wife reset our old laptop to factory settings before we gave it away. She has now discovered that she has not transferred 6 months off videos from our daughters lives which was stored on the laptop. These were not backed up as I was away working. Is there any way we can recover these videos? The operating system was vista.
My computer has been slowly deteriorating the last few days. It first ran a system repair every time I started the computer and would then boot to the desktop, then it would just loop through the system repair screen over and over. I am thinking that my last option is to restore the computer to it's factory default since I have everything backed up on an external hard drive.
I have an Acer Aspire 4730z laptop, upgrading from Vista to Windows 7 Ultimate. Did the upgrade install, but unable to by-pass the eRecovery Management.The 3 options are 1. Restore system from factory default. 2. Restore system from user's backup and 3. Exit. Option 1 and 2 are grayed out. Have disable the D2D Recovery option in the Utility screen. But still unable to by-pass the eRecovery Management. If am unable to by-pass this, my only option is to insert my recovery disk and restore to factory default losing data store on HD.
I have an HP G60 Laptop, I have made the factory default reset discs, but when i boot the first one up it tells me that my hard drive has insufficient space to perform reset.how to fix this without getting a new hard drive?
i have an acer aspire x1900 ..windows 7 32 bit and and wanted to burn the recovery disc from my computer but whenever i click on the create factory default disc ...it just wont open .... then called for help and asked what would i do if ill reformat my pc but don't have recovery disc and the one on my pc itself not loading....they told me to press alt+f10 upon rebooting but it didn't take me to recovery window as what i have seen on one on the Internet video the guy pressed alt+f10 but its not the same shown on mine?
I have an ACER Aspire 5733z-1204 64bit with Windows 7 Home Premium.Attempting to Create Factory Default Disk to (D) HL-DT-St DVDRAM GTSIN I formatted 3 Sony DVD-RW disks using the Windows 7 feature (Live File System Format)It doesn't seem to recognize the DVD-RW disk and keeps telling me to insert a blank disk.
I have an HP dx7 laptop, which was experiencing repeated blue screens with many different error codes as well as periodically restarting seemingly at random. Occasionally it would also have the screen go black (looked like it entered sleep mode), which was unrecoverable.I tried to track down the various drivers and problems suggested by the error codes in the BSOD, but didn't have any success in preventing the blue screens/restarts. Eventually I decided to take the system recovery DVD's from HP, and reformat and reset to factory defaults. I figured at factory default settings if the system was still unstable, it'd point towards a hardware problem as opposed to drivers or other software.While performing the system recovery, it proceeds all the way to where it says "Setup is preparing your computer for first use" and gets to the step of installing drivers, at which point the system restarts. After booting up it then tells me that the installation has failed, and to reinstall. I've done this 3 times now, and get the same issue each time. I cant provide logs or dump files of the blue screens or other errors, since the HDD has been formatted as part of the system recovery.
I have an error when i try to make a factory disc, it says "hard drive configuratiuon is not set to factory default, back up aborted". I bought this computer at a cashland that is now doubling as a pawn shop.
i have a emachines w3615 had vista os in originally changed to windows 7 os on a desktop increased my ram added a second disc drive added wireless adapter and gut a brand new 200gb hdd drive from a friend and got it working and all(lol he one im using) everything checks out no problems at all no error or anything with the configuration of the software or hardware, but its puzzling me on why i can not create my own recovery disc even when i just redone the os using a friends recovery discs of windows 7 os and i was able to use my key code on my tower, mostlikly cause theres was a emachines aswell but any help on what could be telling me that my Hard Drive is not set to factory configuration back up aborted.
I accidentally set my computer to factory default, and I really want my previous admin account that has all my programs installed, how do I get it back?! How do I get my previous profile admin back?!i have lots of programs installed in there!
I have the original discs supplied to me by acer, had to zero out the new HDD because their tech didn't know what they were doing. So now how do I and what is the partition size? acer aspire 5750-completely restore computer to factory default settings on new HDD what is the % of OS partition size (100% is default) but 100gb is minimum for windows (about 40%)
My friend's laptop won't boot. You turn it on and the Advent symbol comes up and gives you an option to go into the BIOS or onto system recovery. It allows you to go no further. If you go to system recovery you can't even do anything, the typing cursor style thing is just flashing. He doesn't have the CDs to recover Windows 7 and restore it.Is there any way to restore? I also have an Advent laptop, would it work if I made a recovery CD from control panel for Windows 7 and then use it to boot and restore his Windows?
I was repartitioning a 3 NTFS partitioned 1,5tb drive down to one partition via win 7 Disk Management tool. I successfully shrank one of the partitions. After shrinking the second partition, win 7 had a hiccup and reported the remaining single partition is now in a 'RAW' format. I still have data on the drive that i would like to recover prior to reformatting it.Apparently, on reading up about "RAW' files, the data is still there. What i would like to do is to somehow view the data and extract portions of it at a time to other smaller hds. From what i has read i can only extract everything to another 1.5tb drive, which i just don,t have available. If i can find a solution, i will eventually reformat and reuse my 1.5tb drive.How can i extract portions of data from a "raw" drive to a second smaller drive?
My new laptop, after about 8 months of service, yesterday refused to be turned on again. No reaction to pressing the on button. The power supply seems to work. Before sending it for repair, I opened it and got the 2 HDs out in order to recodev some data using a SATA/USB adapter. Unfortunately, BOTH disks, when connected to another PC using the adapter, say that they need formatting. I tried to open a DOS window and typed : chkdsk e: /r It replied that the file system was RAW and chkdsk didn't work for it. When connected to a Linux PC, I can see the partitions but I could not mount them.
Not one of the smartest things I did but my mate gave me his old computer excluding the HDDs
So I installed my HDD into it and thought while I was at it might as well upgrade to windows 7 (From XP) since I had to reinstall the OS. I installed window 7 using the upgrade option and the HDD were cleaned. I left it for a while only to come back now an unbootabe computer..... I reinstalled having to go through the custom install. I can now log into the computer.
Is the data on my HDDs gone forever? Also the OS isnt recognising one of my HDD's?? (Maybe save it for another post)
If this isnt the right section please let me know where to repost
I recently had some spyware hit my computer and then removed. Since removing the spyware, one of the things i have noticed that is not working properly since is that when i click on the "Start" Menu, then try to highlight and open one of the programs in the "All Programs" folder, i get a message sub the program saying "empty" and then the programs will not open. i have tried to update windows and also run a command prompt computer scan.
My husband's laptop had an issue. When that issue occurred our father in law created a stack of back-up discs. My husband had 100s of music CDs loaded on his laptop. so these recovery discs include all that music. He had his computer system restored by Geek squad with windows 7. But we can't figure out how to restore this stack of discs with all of his music. We've searched on windows help with no luck. He puts the disc into the e: drive and the files are visible. We don't simply drag and drop right?
I work at a pawn shop and someone did a reinstall on a pc that had a 7 ultimate upgrade from 7 home prem. Is there any way to recover the key for the 7 ultimate? Keep in mind this pc was out of pawn and can't ask the original owner.
Tonight I was reformatting my external hard drive when I accidentally chose the wrong drive and reformatted my internal hard drive. My screen went black and now I have a computer with no operating to boot up. What are my chances of recovering? How can I recover my hard drive?
P. S. I tried doing a system restore and my disks hang on 80% completion twice now.
I made a system image backup from my ssd,then I bought another ssd to put the system image on,I tried when the 2nd ssd was completely empty; it saysthere is no disk to recover to ( or something like that )then I installed clean version of windows on the 2nd ssdafter that I tried restoring via the system repair disc but it kept telling me the same message
