Recover Files From A Corrupt Unreadable NTFS Harddrive?
Jan 31, 2012
I'm in desperate need to recover things from my corrupted D drive. When I click on it, it says D: is not accessible. The disk structure is corrupted and unreadable.When I restart it always does chkdsk for that drive, but it can't repair the corrupt master file table, and it's the same result where the drive is unreadable. I used the Getdata recover my files software to recover the drive. It didn't find the things I desperately need, and I noticed a bunch of files it recovered is now corrupt.The most important thing I need to recover is a windows movie maker project that I've spent hours upon hours upon hours on for a music video. I so desperately need that .mswmm file. This software found just about all of my windows movie maker projects except that one, just my luck.
The second most important thing I need is my Adobe Audition session files along with the wav's for the sessions. I have a new computer I should be getting today, and my friend will be over in 2 days. I need to figure something out quickly cause he will need to format the drive which will make it lose everything. He is pretty sure that the drive will be unreadable on his laptop which he's bringing over.It recovered 2 936gb files and a 465 gb file with no file extensions that were labeled $BadClus~$Bad_1 $BadClus~$Bad_3
View 7 Replies
ADVERTISEMENT
Dec 22, 2009
I have a dual boot machine, Windows 7 Pro 64-bit and Kubuntu 9.10. Everybody was getting along just fine.
Today I booted from Windows, no problem; booted Kubuntu, no problem; then later rebooted to Windows. I now get a message that my Program Files (x86) folder is corrupt and unreadable. [While in Kubuntu I did nothing other than look at the list of files using Kubuntu. No file was opened or modified.]
- I tried dropping to a command prompt to run chkdsk (as recommended by the error screen) but cmd is corrupted
- So I booted off the Windows 7 disk and was able to run chkdsk - no problems found (with the /f and later the /r switches)
When Windows 7 opens, all my 32-bit programs are unusable, and I can't explore the Program Files (x86) folder. Properties lists it as 0 bytes. However, when I browse the folder from a Kubuntu boot, everything seems normal and is accessible.
I (gently) used some Kubuntu ntfs tools (such as ntfsfix to flag the volume as dirty so Windows would check/repair the volume on boot) but got nowhere. [I have no idea if this is useful, but I included the ntfsinfo output from both my Program Files and Program Files (x86) folders.]
View 4 Replies
View Related
Mar 10, 2012
I've got a corrupt file on my TomTom ONE Third Edition. TomTom support has been unhelpful, and Google has let me down for the last 2 hours. I've tried programs like ChkDsk, Move On Boot, Unlocker, and FileASSASSIN.
I am running Windows 7 Ultimate, and the file that needs to be deleted is ttsystem.
View 12 Replies
View Related
Nov 26, 2012
It's my daughter's computer. A little e-Machine, 250G HD, Windows 7 32-bit on it. Out of nowhere her computer wouldn't boot up. I can get it to try to boot using the Windows disk, it gets so far, and then the repair fails saying:
The file or directory C:/Boot is corrupt and unreadable. Please run chkdsk utility.
I try to re-install. she had backed up everything on my external just days before. It gets near the end, and then the same error comes up. I cannot get into anything else. Nothing else will load. I don't even know how I can run chkdsk. Unfortunately the computer is about three years old and she can't remember the specifics except there is only one HD in it. She had no internet at her place so it's not because she suddenly installed something. She was using it to watch movies and listen to music mostly. I'm at wits' end, can't figure it out.
View 1 Replies
View Related
Jun 13, 2012
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
View 1 Replies
View Related
Dec 23, 2011
When I start my PC it shows a message that "your file named NTFS is corrupt". Then PC screen becomes Blue and shutdown my PC! Should I change my hard drive?
View 2 Replies
View Related
Dec 14, 2012
used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.
View 4 Replies
View Related
Aug 25, 2011
I an trying to recover data from a seemingly corrupt drive in 500 gig sata HDD which I ran in windows 7 on 64 bit and I made two partitions one being a boot and the other had data on it and then I had one other sata drive that was 200 gig on separate drive with data! When I run on another computer it doesn't seem to read anything or recognize data!how to recover it?
View 2 Replies
View Related
Feb 5, 2012
Moved doc, docx, xls, xlsx, jpg files from a backup drive to a new computer. Files showed up, and I used them for a few days. As it was a demo computer I changed the owner name via regedit. Then could not locate the files. Have used two undelete programs, these locate the files. When recovered however, although the names show, the contents are unreadable. Went back to the backup drive. Cannot locate the files, even using an undelete program.
View 6 Replies
View Related
Nov 8, 2012
With NTFS and Share permissions is there any way I can allow a user to (in a specific folder):
- Edit and overwrite existing files (like a notepad file)
But
- Not be allowed to create new files or folders
I have spent quite a while staring at the special permissions screen. When reading about the meanings of the special permissions from the Microsoft, it says that the "Create Files/Write Data" permission allows for the overwriting of existing files but it also allows for the creation of new files. Is there some way i can have one without the other? Split the permission? I have also been told that there is a flaw to this as when you open a word document it creates a temp file in the folder where the word document is, and having permissions set this way would cause the word document not to be able to open because it couldn't create that temp file.
View 1 Replies
View Related
Jan 26, 2012
a number of backup copies of large files on external USB-connected NTFS drives differed from the source versions still on my hard drive. I also discovered that I could reproduce the issue with newly-copied files.Here are the specifics of the issue, following a series of experiments:
- On my system, copies of large files, files typically larger than 500MB, are corrupted (altered) roughly 30% of the time when copying them under Windows 7 64-bit to USB-connected NTFS-formatted external drives.
- No error occurs / no error message appears during the copy
- The file size of copy is always identical, whether or not data was altered during the copy process.
- File differences are confirmed via either the command-line "FC" command or a utility such as WinDiff
- The issue impacts copies made via the Windows GUI -OR- via command-line copy or xcopy
- The issue occurs with multiple external USB NTFS-formatted drives, no matter what make or model.
- Subsequent attempts to copy an affected file will ultimately yield an identical copy. This would seem to rule out interference by an external program such as an anti-virus program (and the only AV I am running is Microsoft Security Essentials)
- The USB drives involved pass error checks, and copies made to these drives on other (non Windows 7) systems produce identical copies
- So far, the third party utility "TeraCopy" manages to consistently produce clean copies, and therefore is a temporary workaround. This utility apparently works because it, by default, bypasses the NTFS memory caching operation used by the Windows 7 OS...a caching system which I have so far found no way of disabling.
- The problem does not appear to impact relatively small files (1 to 100MB or so). I have not found any particular threshold, but I have seen the issue impact numerous files in the 500MB neighborhood.
- The problem seems to date at least to the version of Windows 7 that was in release as far back as the Fall of 2010, as I discovered corrupted backup copies of files dating back that far. Again, the files are corrupted with respect to the original copy...NOT with respect to file structure itself.
View 6 Replies
View Related
Dec 1, 2011
I have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).
I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).
So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).
View 6 Replies
View Related
May 5, 2012
when checking the disk, i got the following message:"windows resource protection found corrupt files but was unable to fix some of them." it mentioned a log that was saved (CBS.log), though i'm not sure what to make of it.what can i do to fix this? i have a lot of data on here that i don't want to lose. the computer does seem to be working mostly ok, but i did just get a BSOD and the above message.this is Windows 7 Pro, 64-bit. and i ran malwarebytes and kaspersky but they came up clean.
View 8 Replies
View Related
Apr 26, 2011
I've got a new PC running Windows 7 Home 64-bit. It works well and I'm very pleased.I've just tried importing my Outlook.pst file from my old computer (ran Win XP Pro) which died (partition got partially deleted). I've managed to access it using "Find and Mount" which will display the partition as a drive in My Computer and I can access all files bar those in "Documents & Settings" which it comes up saying I don't have permisson to access.I've tried to take ownership of these files, however I get an error saying "The media is write protected". Is there anything I can do to recover the files?
View 3 Replies
View Related
Dec 14, 2010
I have a bit of an odd problem, I have an external USB 640gb hard drive (Freecom ToughDrive with Password encryption software removed using Freecom tool), I use it at home (on a new dell Windows 7 64 bit PC) to store all my dataIf I take the drive into the office and plug it into my machine there (Windows XP) I can read all the files, copy them off, no problem, same with my Windows 7 (64 bit) laptop that I have at home as well and on my Mum's (windows 7) laptop.The problem is that if I open a file on any of the non home PC's (a word document or a JPG etc) if I then save changes to the file, when I try to open it on the home machine it either says it is corrupted/unreadable or that in the case of a folder of documents I copied on yesterday in the office - that the folder contents were not accessible.
I have just tried opening a word (2003) doc that I saved on the drive in the office yesterday on my home machine and word shows that it is goobledygook, I have closed the file (without saving or editing on the home machine) unplugged the drive and plugged the drive into my windows 7 laptop and when I view the folder with the word file in, the file has now gone...I have also noticed that when I have created this 'corrupted' file situation, when I then plug the drive into a different machine I get the windows "scan and fix" option. I have done that in the past and it has 'found' all the files that I corrupted on the other machines and stuck them in a $found folder as though there was actual hard drive corruption.Until about 6 months ago I had a Windows XP machine and have been working with an external USB drive for years switching it between many different machines - I thought it was the drive (I originally had a freecom toughdrive 320gb) at first so I replaced that about 2 months ago when I realised what was going on but it hasn't made any difference.
View 3 Replies
View Related
Sep 13, 2011
i dont know what ive done, but ANYTHING i download, comes as a utorrent file, so i cant open them.usually when i download a movie i can watch it, or games i can play them
View 1 Replies
View Related
Aug 1, 2012
I did a photo recover. Some of my photos were recovered, but the ones I wanted came out corrupt. Some of them come out really weird, but most of them say "Cannot Open This Filetype" all of the photos are .jpg even the ones the are working. How do I fix this so that I can see all/most of them perfect or near perfectly.
View 5 Replies
View Related
Apr 18, 2011
Mp3 files on an external drive seemed to become unplayable after connecting the drive to a win 7 machine. the pc is not mine. a friend sent me some samples of the bad files and asked if i could play them or convert them to a playable form of some typeno luck at my end. the mp3 files were created on win 2000 and xp machines.
View 3 Replies
View Related
Feb 5, 2012
I was getting notification bubbles in W7 about many of my .exe files being corrupt, including chrome.exe and a few other programs. The notifications recommended that I run Chkdsk, so I went to the C: properties and chose Disk Cleanup, or whatever Chkdsk is called in the menu, I forget at the moment. Well, when I did that, I got yet another notification, this time saying that Chkdsk.exe is corrupt, and recommending that I run Chkdsk (lol). Well, I apparently chose to schedule Chkdsk to run on next startup. But after I shut down to let it run I booted up and after my Dell screen I get....nothing.
Just a blinking horizontal bar, looks like that little input cursor flipped on its side, in the top left corner. I'm running Ubuntu 11.10 on a USB flash drive at the moment, what can I do from here? Until this happened I've never used a Linux OS before so I'm not very savvy with it yet, but when I view my partitions on here (500GB HDD) I see that 451GB is Unknown, in a partition manager there is a red flag notification saying that I have bad sectors, which I already knew. I've heard a lot about running a program called ntfsprogs, but I can't find it. Is there any way to recover my Windows 7 boot without losing any of my data on there?
View 8 Replies
View Related
Feb 20, 2012
I have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file, as i have attached it here.
all the files are either .inf or with .nlp extensions.windows is running fine. but i want to get rid of the problems before they become a serious issue. I have a pre-installed OEM version of win 7 basic SP 1, and i have a HP G6-1117TX laptop. There is a drive named "System", which is the active and boot-able partition, and is not the same drive where windows is installed.
View 5 Replies
View Related
Apr 5, 2012
My daughter has a Gateway laptop running Windows 7 Home Premium 64bit. We have 4gig RAM installed.The other day she tried to create a folder on the desktop. However, she was not able to do that and was also not able to click on any icon on the desktop at all.She restarted the computer and it seemed to fix itself. However, the next day it happened again.Does this sound like a corrupt system file or a virus? We have PC Tools Internet Security on her laptop and it says there are no viruses.Also, not sure if this is related, but the computer takes over 15 minutes to shut down. Actually, I don't know exactly how long it takes because after 15 minutes she gets frustrated and just holds down the power button to force it to shut down.There are no updates available - we have checked and it says there are none.
View 1 Replies
View Related
Oct 4, 2012
Windows Resource Protection shows some corrupt files. I am assuming their in my Windows 7 bought two weeks ago. Where they come from I dont know or care. How do I clean this all up without dumping all my files and programs? It may be preventing my HP printer from scanning, printing yes, scanning no. I have been on the phone for hours with HP, ASUS and today Microsoft, they told me to run a program "cmd.exe " which showed the corrupt files?
View 2 Replies
View Related
May 9, 2009
I got an installation disk that actually has files on it and show up on my computer but I have a new problem now in which an error shows up saying that some of the neccesary files are not being found which is really unfortunate. The error code I am getting is:Ox80070017
View 8 Replies
View Related
Nov 14, 2012
So I have a weird situation.A friend of mine has somehow bricked her computer. She is not the most computer savvy person and I have no idea how her computer got to this point, but the computer no longer recognizes her original windows installation. There is no way to upgrade or repair from the original installation as it does not appear. Her computer will not boot except from the installation disk. Her drives are visible in the command prompt. The windows folders and whatever are all there. There is approximately 7 gigs of stuff on her drive, but when you go to select the partition on which to install win 7, it shows it as being 100% empty. I tried installing it on that one first, it got through copying and expanding, immediately after reaching 100% expanded, when it tries to start the next phase, it throws me a corrupt installation files error. It appears to be different each time. So i created and reformatted a new partition and attempted to install to that one and I'm having the same problem. The disk is a real win 7 pro x64 disk, it is in pristine condition and was opened only yesterday when i went to install the OS so i don't think the disk is the problem, however i'm downloading the Windows 7 iso from the microsoft website and am gonna give that a shot. Does anyone have any ideas or suggestions?Oh yes, and it doesn't seem to want to let me run the Chkdsk utility, it always tells me that i need to reboot and run it from the installation disk which is what i have been doing
View 2 Replies
View Related
Jun 14, 2011
I've run an sfc scan and it reports corrupt files but when i generate an sfcdetail log file on my desktop it shows no currupt files in the log is the sfc tool broken?
View 3 Replies
View Related
May 5, 2012
i had all my family pics and videos in a folder sizing 32 gb, so i compressed it to a file sizing 8gb and deleted the original folder. now i want extract it but it extract's only some videos totally sizing 8gb. it gives me a diagnostic msg saying that 3 of my files r corrupt. what should i do to get my pics back, it was a huge collection of memories,
View 5 Replies
View Related
Jun 17, 2012
is here possible to recover old files from broken HDD to new HDD?"broken HDD" don't work anymore.
View 1 Replies
View Related
Apr 29, 2012
I had about 15 files recovered/saved by an abnormal shutdown.These were named File0000. chk to File0014. chk.First I tried renaming them with the likely extensions I use most often, such as .xlsx and .docx for Excel and Word.This successfully recovered over 1/2 of my files.Now I have 5 files remaining, which aren't yet recoverable, even trying other extensions like .pdf, .txt, and .jpg but no luck on those.I also downloaded and ran the free UnCHK at ericphelps.com and this recovered 1 more file. url...With my 5 remaining files, I tried joining some of them, thinking that maybe that might solve something, but that hasn't worked yet.I haven't yet tried joining different combinations of 3 file fragments into 1, as the permutations of 3, 4, or 5 files would be time consuming.
Here is an example of the code to join 2 files. copy /b file0099.jpg + file0001.chk test. jpg..The above would take the partially recovered file0099.jpg file and add the contents of file0001.chk to it, storing the result in test.jpg. You'd then have to try opening the test.jpg file to see if that helped.
View 3 Replies
View Related
Dec 26, 2012
I am having some issues with some programs not working on my computer. I tried uninstalling them and reinstalling but they just fail on load.
I opened up command prompt and ran SFC/ SCANNOW and received a message about corrupt files.
View 14 Replies
View Related
Feb 10, 2013
Corrupt files in System File Checker - now whaIn trying to fix a still unsolved problem with my WLAN network connection (detailed here, if relevant: WLAN issue - WiFi can't connect - Tech Support Guy Forums), it was concluded that a main problem is corrupt files identified by the System Files checker.This is the message I get when running the checker toold corrupt files but was unable to fix some of them Checking the log, I searched for cannot repai but nothing comes up. Searching for in the logs turns up some cases of annot verify component files for Microsoft-Windows-Security-Kerberoarch for turns up nothing. Not sure what to do now. My computer is a Dell XPS 15 Z
View 8 Replies
View Related
Sep 17, 2011
I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7 the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method that might take a long time.
View 3 Replies
View Related
