I turned on my computer, it ran perfect for about 5 minutes then decided to reboot itself. After it rebooted I lost all internet connections, still had local connections to printer, scannner.After attempting to reset router and modem three times I finaly did a system restore.I got back internet connection for about 5 minutes then it rebooted again and again no connection.System windows 7 ultimate 64, intel based, I7,home built, had never had a problem till today system has been up and running for over a year.
After I rebbot my computer I lose internet. I restore to an earlier time it comes right back. The internet is Fios router and modem combo by Actiontech. Internet is fast and works well all the time until reboot.
This happens randomly, starting about a month ago. I'm on Windows 7 64bit, and every so often my monitor would flicker black just once, and once it goes back from blackness for a second, the task bar would be totally plain and white. The internet would also be disconnected with no way to go back to normal unless I restart. Half the time, the computer crashes after I restart making me use a restore point.
Does this have to do with hardware? I run diagnostics and memtest86 and half the time it says something is wrong with my RAM, then when I reinsert them, the tests say I'm ok. Then when this happen again, my ram tests faulty again. I have no idea what's going on. Any light on this situation would make me very appreciative.
We have 2 wireless laptops & 1 hard wired tower (all onWindows 7) in a home network. (All hardware are new this year) The laptops have intermittent internet connectivity yet do not lose the network connections. I have upgraded both the Motorola modem and Linksys router to Windows 7 but it did not resolve the issue.
Windows 7 x64Intel i7 860 Lynnfield4GB RAMI've got a .mkv file and a .nfo file in a folder with no other files or folders. On a clean boot, I've got ~2390MB of free memory. As soon as I open this folder, the memory in use begins to climb and within 60 seconds I've lost all of my free RAM. Once it maxes out, performance falls off a cliff and typically ends with me doing a hard reset.I used the resource monitor to track this, and the bizarre thing is there doesn't seem to be any process actually using up any memory. All of the processes listed there in the memory tab keep just about the same amount of memory in use (looking at committed, working, shareable and private).If windows boots in Safe Mode, the issue is not reproduced.I can open the video and the video plays.<edit>If I open the video from the recent history within the Media Player Classic, it will play and does not take up my memory</edit>What do you think?
Am I going to lose my vista CD key after upgrading to windows 7 because I heard from many people that I will not be able to use my vista CD key in case I wanted to return to windows vista?
Very peculiar problem that probably started with installation of a toolbar by mistake. Suppose I'm in chrome and typing in a text box, after exact 5s, the whole window loses focus and i need to click on the box again to regain focus and resume typing (you can understand how annoying this is). I have tried these so far but failed to resolve: Got rid of the toolbar, Ran MSE. It cleaned two security issues. Created new user, Still, the same. No change.
Okay, so I just installed a new motherboard and heatsink w/fan into my system and reinstalled everything from the old system(ram, cpu, gpa, psu, dvd burner, network card, ect).I formatted the hard drive before the swap to do a clean install. During the swap of computer components, I pulled the CMOS battery for a few seconds to reset the bios.During the install of windows, it usually comes up to the point of copying files or decompressting files, the screen cuts out, then the monitor goes into standby due to no signal.The video card is an AMD Radeon HD 6450 1gb.I seen somewhere that Win7 sometimes has issues with certain AMD card base drivers (not sure that its called, but the simplified driver used before the full drivers are installed).Currently I am rerunning memtest86 to test the ram, already ran the harddrive utilites to test the hard drive and so far both have 0 errors.
I very recently purchased a new Desktop running Windows 7.Am Computer illeterate more or less!I have always been conscious of space on my Hard Drive and the most I used on my old PC was 60gb max.Used easy transfer (not that easy!) to get all my old data across, then started putting in programmes I used.One was Google Earth. Worked first task, then didn't so uninstalled, reinstalled - no luck, so finally uninstalled.HD usage upto now was an acceptable 40gb.One day, whilst PC was in standby, I saw something was active, so using Task Manager saw it was Google Earth??? Was NOT installed but the process was upto 25%?Stopped that but later saw my HD usage was around the 100gb mark!Done regedit and all that to see if Google Earth showed up but nothing.Did a Spy Bot scan and it came up with numerous entries -C:UsersAnge&GeoffsAppdataLocall.....Cannot find that but has all that space gone into a "black hole"?Apart from updating Windows 7, I have downloaded nothing to account for that massive HD space?
My computer crashed and I am unable to get windows to start it goes all the way to the login screen but never loads so that i can type my password it just keeps trying to load. anyways Ive tried all the other routes to repair and no luck now im at the point where I would just prefer to do a new install, but I cant access my important work related files to back them up onto an external HD. I have my Windows 7 disk that I made when I got my computer new.I put that in and boot from the disk I brings me to the partition menu with no upgrade option (I think that is the option I need in order to create the Windows old folder?) So my question is If I format the System Partition and reinstall windows on that partition will my data on the data partition be effected? or will the data partition still be available once the fresh system is installed?
It is possible to compress my movies recorded by my camara without lose quality?Only 2 minutes video in HD is 500MB. It�s a lot I think.Is there any way and some program that you can recomanded me?The most important is not to lose quality and resolution.
When I login to my work machine and open explorer or anything, Explorer.exe crashes and restarts. Once its restarted I can no longer open any programs or explorer. If I right click on the shortcut it appears to be missing the "open" command and double clicking doesn't work either.I have scanned for viruses, using Trend, Avast, AVG and Panda. I have also scanned for MAlware using Malware bytes & Spybot and they did not find anything.I have also logged on as a different user, this works fine. After that I recreated the profile and still explorer.exe is doing the same
i have 2 hard drives 1 with win 7 beta but strangley i cant boot the final ver of windows 7 so im installing it onto the 2nd drive, and make it my main boot, now if i want to remove the beta boot record will i lose my files on that hdd.
I have a desktop windows 7 64bit O/S. All is fine when I boot up but after a while the P/S2 keyboard & mouse stop working. The drivers are up to date. The computer is only a few months old. Is this a hardware problem or a software one? should I take it back to the shop?
if i had 2 apps open, i could single click app 1's respective Taskbar icon to restore (minimize)/lose (set) focus. the aforementioned method would also minimize or maximize the app 1's window as the focus changed. further, if i launched app 2, app 2 would load in the foreground, immediately receive focus and i could use it right away. seems after a recent Windows Update, i lost the ability to use all the above methods. My current Taskbar properties are: Taskbar Tab - Lock the Taskbar, Use Small Icons and Autopeek all enabled Start Menu Tab - both Privacy settings enabled the steps below describes the current behavior starting with no apps open: i open app 1 (e.g., Firefox) and perform an app 1 activity next I open app 2 (e.g., Word) and app 2 loads in the background (as opposed to opening in the foreground and receiving the focus) i click on app 2's taskbar icon to gain access (transfer focus) and perform an app 2 activity, however, app 2's taskbar icon starts flashing but app 2 doesn't receive the focus.to access app 2 i have to minimize app 1 using app 1's minimize button if i want to go back to app 1 i click on app 1's taskbar icon to gain access (transfer focus) and perform an app 1 activity, however, app 1's taskbar icon starts flashing but app 1 doesn't receive the focus. to access app 1 i have to minimize app 2 using app 2's minimize button now clicking an app 1 or app 2 taskbar icons cause them to start flashing if app 2 has the focus, and i mouse over app 1 (when it doesn't have the focus) and click the preview of app 1, app 1's taskbar icon flashes, but the focus does not shift to app 1 - it remains with app 2. with 5 apps open, if i want access to app 2, i have to minimize app 1, 3, 4 and 5 using their respective minimize buttons to see/gain access app 2. as i mentioned, in the past, i only needed to single click any app's Taskbar icon once to lose focus (and minimize window) and transfer focus (and restore window) to another app or vice versa. call me weird, etc, but this greatly enhances my work productivity because i'm navigating to windows with virtual machines, remote desktop connections, etc. i even created a restore point where this behavior is working as i want it. if i restore and update, the behavior changes.
I'm running Win 7/64 Home Premium on my media PC with 7 USB drives, all connected via a powered hub.
Whenever I reboot (warm or cold), the sharing permissions are lost, generally to all, although every so often one of the WD drives will maintain it (the Seagate ones always lose them). I've tried using different ports to no avail. I've changed the properties of the drives so that I am the owner (as an Administrator). That doesn't help either.
I've read that Windows keeps a list of dynamic shares (or something like that) and that this behavior is by design as drives can be disconnected when the PC is not running. Is this true? I never had a problem with Vista, so this is definitely a Win 7 thing.
I bought a fujitsu T731 tablet PC with windows 7 professional a few days ago and it works ok if I do not let it update with an install of " windows 7 service pack 1 " which looses the wireles connection. This is a reproduceable problem which I reported to fujitsu who's answer is to not allow updates and saying it's not their problem but rather microsoft's which is not allowing their driver for the wireless. I had to reinstall fujitsu's recovery files and another time had to do restore thru windows. So now it works but without the update install.
Win 7 x64 Home Premium w/Gigabyte GA-EP45-UD3P, v.1.1 (P45), works great in IDE mode. (N.B.: eSATA port is just regular SATA port w/cable as provided by Gigabyte.) Trying to install external eSATA HDD. First I enabled AHCI drivers via registry. Then I turned on AHCI in BIOS. When I save BIOS and reboot, boot hangs when DVD writer performs sniffer boot, i.e., HDDs aren't found.
It does it once a day,yesterday it was about 3:30 pm today it was 11:30 am its done it at 9 pm and I have windows update service disabled on the msconfig startup.
I have a little problem with my laptop here, I am using Windows 7 enterprise 64-bit and everytime I reboot, nothing saves at all. This is quite annoying since I downloaded a 14GB game and it just vanished after reboot, now I got to download it again. I know there is a way to disable this thing, but I can't figure it out
i have had windows 7 64bit version installed for a couple months on my pc, and these 2 days it's kept rebooting. it goes off (no shut down message, it all happens all of a sudden), and after a second or 2 the machine boots up again. before loading the os the pc prompts me to choose if i want to start windows normally. i press enter and windows starts up with no problems at all. when a system error occurs, after rebooting it usually notifies me that the system was recovered from an error. but it displays no message.
now, my question is this. i heard that before the coming out of the windows seven final version, microsoft would have you install an update that reboots your machine every 2 hrs to "suggest" people buying the os... how kind of them, really... whatever, is this possibly the case? if this is, i guess i gonna downgrade to windows vista till i can buy windows 7.
I have Win-7 32-bit and I want to overwrite it to Win-7 64 bit. It is currently set up with RAID-1. If I fresh-install Win-7 64 bit, do I need to do anything special to preserve the RAID-1? I did not set this up originally: It came this way from the seller, and I'm not all that tech savvy. I just need to know what, if anything, I need to do when installing Win-7 64 over the Win7-32 to keep the RAID-1 going.
I want to upgrade my computer to windows 7 (or Windows 8 in a few months) from Windows XP, but I was wondering if this would cause me to lose all of my drivers. As long as I backed up all my programs, would my drivers stay intact or would I have to re download them?
I have just bought a new PC with Windows 7. Ive only had it four days and today my computer store replaced my MB cos my computer has taken to shutting down and then restarting all on its own. the problem is Ive just got it home and its doing the same thing.
