Lose Internet After Every Reboot?
Nov 4, 2011
After I rebbot my computer I lose internet. I restore to an earlier time it comes right back. The internet is Fios router and modem combo by Actiontech. Internet is fast and works well all the time until reboot.
View 1 Replies
ADVERTISEMENT
Nov 10, 2011
I'm running Win 7/64 Home Premium on my media PC with 7 USB drives, all connected via a powered hub.
Whenever I reboot (warm or cold), the sharing permissions are lost, generally to all, although every so often one of the WD drives will maintain it (the Seagate ones always lose them). I've tried using different ports to no avail. I've changed the properties of the drives so that I am the owner (as an Administrator). That doesn't help either.
I've read that Windows keeps a list of dynamic shares (or something like that) and that this behavior is by design as drives can be disconnected when the PC is not running. Is this true? I never had a problem with Vista, so this is definitely a Win 7 thing.
View 4 Replies
View Related
Apr 25, 2012
I turned on my computer, it ran perfect for about 5 minutes then decided to reboot itself. After it rebooted I lost all internet connections, still had local connections to printer, scannner.After attempting to reset router and modem three times I finaly did a system restore.I got back internet connection for about 5 minutes then it rebooted again and again no connection.System windows 7 ultimate 64, intel based, I7,home built, had never had a problem till today system has been up and running for over a year.
View 2 Replies
View Related
Dec 16, 2009
This happens randomly, starting about a month ago. I'm on Windows 7 64bit, and every so often my monitor would flicker black just once, and once it goes back from blackness for a second, the task bar would be totally plain and white. The internet would also be disconnected with no way to go back to normal unless I restart. Half the time, the computer crashes after I restart making me use a restore point.
Does this have to do with hardware? I run diagnostics and memtest86 and half the time it says something is wrong with my RAM, then when I reinsert them, the tests say I'm ok. Then when this happen again, my ram tests faulty again. I have no idea what's going on. Any light on this situation would make me very appreciative.
View 6 Replies
View Related
Jun 2, 2011
We have 2 wireless laptops & 1 hard wired tower (all onWindows 7) in a home network. (All hardware are new this year) The laptops have intermittent internet connectivity yet do not lose the network connections. I have upgraded both the Motorola modem and Linksys router to Windows 7 but it did not resolve the issue.
View 5 Replies
View Related
May 13, 2009
I've upgraded my Dell Inspiron 1525 from Vista 32bit to Windows 7 rc1 64bit. I've installed all old Dell drivers from a guide I've read. Now, I'm having problems. I get disconnected from the internet, it says that it cannot connect to the local network. It happens 30+ mins while using the laptop. All I do now is reboot the computer.
View 2 Replies
View Related
Mar 5, 2012
I have a laptop with a Intel N6230 wireless card which I'm having a strange issue with. I can be connected fine to my wireless network but if I perform a reboot the laptop 'connects' to the network however has no internet access (nor can I access the router via its ip address).The only way i can get it working again is delete the wireless adapter via the device manager, let windows re discover and install it, and all is fine again - nothing else is required. It continues to work fine until I shut down and reboot where it drops again (sleep modes or hibernation do not cause any problem).
View 4 Replies
View Related
Oct 20, 2011
with a little internet problem on a Windows 7 professional system.
Essentially, last week after an Update, I could not get back onto my driver (the hard drive is partitioned so I have a section and my other half has another). A system restore to the previous day has allowed me to access the computer again, but the internet is gone.
The OH can use the internet on the same computer (I am on his half now), so there is no fault with the modem, the cable or the internet connection per se. We have tried to restore the internet using various manual methods, but can get no further than the SetUp. At this point we get a message Error 711, and reports that the Remote Access Auto Connection Manager is not responding.
I have tried to fix this today, but cannot get onto the services to fix it - when I click on Services and go to 'run as admin', the message appears "Class not Registered". I have also had this message when trying to connect the internet by writing a manual IP address, and when looking for the IP drivers.
The OH is threatening F*kdisk which would mean I lose everything on the drive, but I do not have another solution.
View 9 Replies
View Related
Nov 25, 2009
I'm running 7 Home Premium 64bit on an HP box we got about a month ago.
Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.
The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.
Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!
View 2 Replies
View Related
Jan 5, 2010
Linksys Wifi router Died, so i am now connecting to the internet Directly from my speedtouch ADSL modem, on every reboot i loose internet connectivity.
It's basically connected to my home network and it's also connected to an unidentified network, to fix i have to disable and re-enable the network card..
Any body else experience this ?
View 9 Replies
View Related
Jan 23, 2010
Every time I power on my PC, or reboot, my Internet connection does not work for a few mins. Windows loads with out errors and shows the little blue circle on my Network Icon. Then the icon goes to a red x for a few mins, then goes to a Yellow triangle thing and then it goes away. After that the Internet works fine. Also, about every other day I get packet loss and random disconnects.
This is my network setup.
1. Windows 7 professional 64bit PC and an Acer Windows Vista 64bit home premium Laptop.
2. ASUS P5QL PRO LGA 775 motherboard with most current Network driver from Asus website.
3. D-Link DIR-655 Draft 2 Xtreme N Gigabit Wireless Router running from my cable modem to my PC and spitting wireless to my house. The wireless never seems to have a problem. I have not updated the firmware because of brick fears.
4. I have a Motorola SURFboard® Cable Modem SB5100. I own it and it's from about 2004. Not sure if that matters.
Troubleshooting I've done.
1. Unplugged the cable modem.
2. Updated the mobo LAN driver from ASUS website.
3. Rebooted Wireless router.
4. Plugged and unplugged all network jacks to make sure they are in tight.
5. Checked that cable is tightly screwed into cable jack in wall and in back of cable modem.
6. When the internet connection drops or shows packet loss I do the Ipconfig/release and Ipconfig/renew.
It's almost like after every reboot Windows 7 looses my network info and has to re-detect it all over again. It is really odd.
View 2 Replies
View Related
Mar 18, 2011
Windows 7 x64Intel i7 860 Lynnfield4GB RAMI've got a .mkv file and a .nfo file in a folder with no other files or folders. On a clean boot, I've got ~2390MB of free memory. As soon as I open this folder, the memory in use begins to climb and within 60 seconds I've lost all of my free RAM. Once it maxes out, performance falls off a cliff and typically ends with me doing a hard reset.I used the resource monitor to track this, and the bizarre thing is there doesn't seem to be any process actually using up any memory. All of the processes listed there in the memory tab keep just about the same amount of memory in use (looking at committed, working, shareable and private).If windows boots in Safe Mode, the issue is not reproduced.I can open the video and the video plays.<edit>If I open the video from the recent history within the Media Player Classic, it will play and does not take up my memory</edit>What do you think?
View 2 Replies
View Related
Dec 18, 2009
Am I going to lose my vista CD key after upgrading to windows 7 because I heard from many people that I will not be able to use my vista CD key in case I wanted to return to windows vista?
View 9 Replies
View Related
Dec 27, 2011
Very peculiar problem that probably started with installation of a toolbar by mistake. Suppose I'm in chrome and typing in a text box, after exact 5s, the whole window loses focus and i need to click on the box again to regain focus and resume typing (you can understand how annoying this is). I have tried these so far but failed to resolve: Got rid of the toolbar, Ran MSE. It cleaned two security issues. Created new user, Still, the same. No change.
View 9 Replies
View Related
Oct 9, 2012
Okay, so I just installed a new motherboard and heatsink w/fan into my system and reinstalled everything from the old system(ram, cpu, gpa, psu, dvd burner, network card, ect).I formatted the hard drive before the swap to do a clean install. During the swap of computer components, I pulled the CMOS battery for a few seconds to reset the bios.During the install of windows, it usually comes up to the point of copying files or decompressting files, the screen cuts out, then the monitor goes into standby due to no signal.The video card is an AMD Radeon HD 6450 1gb.I seen somewhere that Win7 sometimes has issues with certain AMD card base drivers (not sure that its called, but the simplified driver used before the full drivers are installed).Currently I am rerunning memtest86 to test the ram, already ran the harddrive utilites to test the hard drive and so far both have 0 errors.
View 1 Replies
View Related
Dec 4, 2012
I very recently purchased a new Desktop running Windows 7.Am Computer illeterate more or less!I have always been conscious of space on my Hard Drive and the most I used on my old PC was 60gb max.Used easy transfer (not that easy!) to get all my old data across, then started putting in programmes I used.One was Google Earth. Worked first task, then didn't so uninstalled, reinstalled - no luck, so finally uninstalled.HD usage upto now was an acceptable 40gb.One day, whilst PC was in standby, I saw something was active, so using Task Manager saw it was Google Earth??? Was NOT installed but the process was upto 25%?Stopped that but later saw my HD usage was around the 100gb mark!Done regedit and all that to see if Google Earth showed up but nothing.Did a Spy Bot scan and it came up with numerous entries -C:UsersAnge&GeoffsAppdataLocall.....Cannot find that but has all that space gone into a "black hole"?Apart from updating Windows 7, I have downloaded nothing to account for that massive HD space?
View 1 Replies
View Related
May 19, 2012
My computer crashed and I am unable to get windows to start it goes all the way to the login screen but never loads so that i can type my password it just keeps trying to load. anyways Ive tried all the other routes to repair and no luck now im at the point where I would just prefer to do a new install, but I cant access my important work related files to back them up onto an external HD. I have my Windows 7 disk that I made when I got my computer new.I put that in and boot from the disk I brings me to the partition menu with no upgrade option (I think that is the option I need in order to create the Windows old folder?) So my question is If I format the System Partition and reinstall windows on that partition will my data on the data partition be effected? or will the data partition still be available once the fresh system is installed?
View 1 Replies
View Related
Dec 15, 2012
It is possible to compress my movies recorded by my camara without lose quality?Only 2 minutes video in HD is 500MB. It�s a lot I think.Is there any way and some program that you can recomanded me?The most important is not to lose quality and resolution.
View 3 Replies
View Related
Jan 6, 2012
When I login to my work machine and open explorer or anything, Explorer.exe crashes and restarts. Once its restarted I can no longer open any programs or explorer. If I right click on the shortcut it appears to be missing the "open" command and double clicking doesn't work either.I have scanned for viruses, using Trend, Avast, AVG and Panda. I have also scanned for MAlware using Malware bytes & Spybot and they did not find anything.I have also logged on as a different user, this works fine. After that I recreated the profile and still explorer.exe is doing the same
View 3 Replies
View Related
Nov 5, 2009
Anyone come across this? I have a brand new pc, its nice and fast, installed Windows 7 a month ago and the ATI drivers that were available then.
Now with the lastest update for ATI, my monitor loses signal midway through the install of the new pack and I have to restart my pc to do anything.
I have tried different versions of the drivers, uninstalled my previous drivers and tried to install fresh but no dice.
Any ideas?
View 9 Replies
View Related
Feb 15, 2010
i have 2 hard drives 1 with win 7 beta but strangley i cant boot the final ver of windows 7 so im installing it onto the 2nd drive, and make it my main boot, now if i want to remove the beta boot record will i lose my files on that hdd.
View 2 Replies
View Related
Oct 21, 2009
Did I miss something? I always thought defrags made more space on your computer by organizing files and making programs run faster
But when I did a defrag, using Defraggler
I went from 83 gigs free space to 79 gigs free space
I even restarted, and nothing changed
I think that's kinda weird .
Or maybe I don't know something about defragging, and its suppose to do that.
View 9 Replies
View Related
Oct 23, 2011
when I plug my HMDI cable into my TV from my PC I lose my PV monitor signal
View 1 Replies
View Related
Nov 21, 2011
everytime I restart my laptop It loses wallpaper and solid background. The wallpaper becomes black!
View 1 Replies
View Related
Nov 21, 2011
everytime I restart my laptop It loses wallpaper and solid background. The wallpaper becomes black!
View 6 Replies
View Related
Feb 11, 2012
I have a desktop windows 7 64bit O/S. All is fine when I boot up but after a while the P/S2 keyboard & mouse stop working. The drivers are up to date. The computer is only a few months old. Is this a hardware problem or a software one? should I take it back to the shop?
View 1 Replies
View Related
Feb 4, 2010
if i had 2 apps open, i could single click app 1's respective Taskbar icon to restore (minimize)/lose (set) focus. the aforementioned method would also minimize or maximize the app 1's window as the focus changed. further, if i launched app 2, app 2 would load in the foreground, immediately receive focus and i could use it right away. seems after a recent Windows Update, i lost the ability to use all the above methods. My current Taskbar properties are: Taskbar Tab - Lock the Taskbar, Use Small Icons and Autopeek all enabled Start Menu Tab - both Privacy settings enabled the steps below describes the current behavior starting with no apps open: i open app 1 (e.g., Firefox) and perform an app 1 activity next I open app 2 (e.g., Word) and app 2 loads in the background (as opposed to opening in the foreground and receiving the focus) i click on app 2's taskbar icon to gain access (transfer focus) and perform an app 2 activity, however, app 2's taskbar icon starts flashing but app 2 doesn't receive the focus.to access app 2 i have to minimize app 1 using app 1's minimize button if i want to go back to app 1 i click on app 1's taskbar icon to gain access (transfer focus) and perform an app 1 activity, however, app 1's taskbar icon starts flashing but app 1 doesn't receive the focus. to access app 1 i have to minimize app 2 using app 2's minimize button now clicking an app 1 or app 2 taskbar icons cause them to start flashing if app 2 has the focus, and i mouse over app 1 (when it doesn't have the focus) and click the preview of app 1, app 1's taskbar icon flashes, but the focus does not shift to app 1 - it remains with app 2. with 5 apps open, if i want access to app 2, i have to minimize app 1, 3, 4 and 5 using their respective minimize buttons to see/gain access app 2. as i mentioned, in the past, i only needed to single click any app's Taskbar icon once to lose focus (and minimize window) and transfer focus (and restore window) to another app or vice versa. call me weird, etc, but this greatly enhances my work productivity because i'm navigating to windows with virtual machines, remote desktop connections, etc. i even created a restore point where this behavior is working as i want it. if i restore and update, the behavior changes.
View 9 Replies
View Related
Oct 5, 2012
I bought a fujitsu T731 tablet PC with windows 7 professional a few days ago and it works ok if I do not let it update with an install of " windows 7 service pack 1 " which looses the wireles connection. This is a reproduceable problem which I reported to fujitsu who's answer is to not allow updates and saying it's not their problem but rather microsoft's which is not allowing their driver for the wireless. I had to reinstall fujitsu's recovery files and another time had to do restore thru windows. So now it works but without the update install.
View 3 Replies
View Related
Apr 10, 2011
Win 7 x64 Home Premium w/Gigabyte GA-EP45-UD3P, v.1.1 (P45), works great in IDE mode. (N.B.: eSATA port is just regular SATA port w/cable as provided by Gigabyte.) Trying to install external eSATA HDD. First I enabled AHCI drivers via registry. Then I turned on AHCI in BIOS. When I save BIOS and reboot, boot hangs when DVD writer performs sniffer boot, i.e., HDDs aren't found.
View 1 Replies
View Related
Jun 27, 2012
I have Win-7 32-bit and I want to overwrite it to Win-7 64 bit. It is currently set up with RAID-1. If I fresh-install Win-7 64 bit, do I need to do anything special to preserve the RAID-1? I did not set this up originally: It came this way from the seller, and I'm not all that tech savvy. I just need to know what, if anything, I need to do when installing Win-7 64 over the Win7-32 to keep the RAID-1 going.
View 8 Replies
View Related
Aug 2, 2012
I want to upgrade my computer to windows 7 (or Windows 8 in a few months) from Windows XP, but I was wondering if this would cause me to lose all of my drivers. As long as I backed up all my programs, would my drivers stay intact or would I have to re download them?
View 8 Replies
View Related