im looking for a program to change the start orb/bar however I ONLY want suggestions to programs you have used,Also i would prefer editting the registry to using a program, if someone knows how,
View 1 Replies
I installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.
View 6 Replies View RelatedI have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
I have a program that can only run on 64-bit computers, and my 32-bit computer won't run it. Is there any way to convert the program to 32-bit?(there is no 32-bit version of this program). EDIT: I made a mistake in the title.
View 1 Replies View RelatedHas anyone written a simple program to allow for changing program icons ion Windows 7? I set VLC as the default program for .iso files, and each one shows up at that stupid traffic cone. I want to choose a custom icon.
View 4 Replies View RelatedI wonder how I change the default program for dvd's. Now, when I double-click the dvd in "Computer", Windows Media Player is started. I have powerdvd installed. In file associations it shows that .vob is linked to powerdvd. Is there a way so that when I doubleklick the dvd I want to play powerdvd is started.
I don't want to delete windows media player (I haven't found out yet how you do it yet).
Okay so i tried everything to get my .php open in notepad again. the thing i have doneControl PanelProgramsDefault ProgramsSet Associationsand.Control PanelProgramsDefault ProgramsSet Default Programs
View 3 Replies View RelatedAfter working fine for months my Comodo Firewall failed to start properly on one bootup. Without giving me the option to say do NOT make any changes--for each of the two dialog boxes, I said just close the program--the PCA popped up saying it had applied a compatibility fix! (In the past on older OS's under similar circumstances, I would simply reboot and things would be OK afterwards WITHOUT having my system changed.)
How do I see what change(s) were made and, hopefully, undo them so I can reboot my system and see if the trouble reoccurs?
How to Change the Default Program a File Type Opens With in Windows 7 ?
View 0 Replies View RelatedI am using google chrome. I have orbit downloader software too. When I want to download anything it automatically downloads from google chrome. But I want to download from orbit. How I can change my downloader to orbit?
View 1 Replies View Related" The program can't start because xerces-c_2_8.dll is missing from your computer. Try reinstalling the program to fix this problem." Just got this.
View 2 Replies View RelatedI would like to add a program to my Start up so that if my PC restarts from an update or something else then this program will automatically start up.
View 2 Replies View RelatedI have a little program that I want to load and run at the start up of my Rig, how do I do this? Is there some folder I have to put it in ? If so which one and where is it ? I have looked for a start up folder but can't see one any place.
View 4 Replies View RelatedI want to use several of the Sysinternals suite of tools. Some have a GUI,but many don't. Ignorant me just double clicks on their generic icon and a brief flash of the command-line interface screen and nothing more. Can someone point me to some information on the use of this type of program?I'm not a complete novice on the use of the command prompt screen, as I use it for sfc /scannow, ipconfig, pinging to find my latency, etc.
View 1 Replies View RelatedAny ideas on how to tweak the color of the menu background of Windows 7 applications?
To be specific - as I'm not sure of the correct name - I'm talking about the pale blue color which appears behind "File Edit View History " on Firefox (and other programs), below the title header. It is used as the unselected tab background too.
I don't like it!
I want this color to appear uniformly Grey, as in XP, and without the light slim horizontal embellishment cutting through the words.
I am using Win 7 Ultimate 32 bit I open Set program access and computer defaults (Start/defaults program/set program access and computer defaults), chose the custom and stick to change to the program I want to use. But when I close the window and open it again => nothing change I have try to turn off the UAC but still can not change in this function?What can I do to change it?
View 2 Replies View RelatedTrendMicro Titanium Maximum Security 3 user( Tried their on line chat dropped 3 times different days, Agh )Wants to install directly to SSD C: drive,want to install on 1TB HD ( Partioned to D: E: F want on D: with all other programs.Does not offer an option to install anywhere, just default install on SSD,
View 3 Replies View RelatedI upgraded to windows 7 through a clean install. I just reinstalled itunes but when it prompts me to change itunes to the default program to use for audio files, I click yes and nothing happens. It prompts me every time I open itunes. I went to control panel -> programs -> default programs -> set default programs and itunes wasn't there. I then went to ->associate a file type or protocol with a program but when I tried to change the default program for .mp3 the following happened:
- I double click .mp3
- I click browse
- Secondary Drive -> Itunes -> Itunes.exe
- I arrive at the screen that popped up after I double clicked .mp3 and itunes isn't on the list.
I tried going to a random .mp3 file and changing its default program but the same thing happened. I googled what to do and I looked for a software that would change the default program for filetypes and I used both. They didn't work. I tried the following:
a. Click Start, type regedit in the Start Search box, and then press ENTER.
b. Navigate to
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciesExplorer
c. In the right side of the screen double click on "NoFileAssociate".
d. Change the value of "NoFileAssociate" from 1 to 0. If the value is not present, create a DWORD value and enter the valaue data as 0.
e. Exit Registry Editor and Restart the computer and check.
But I didn't seem to have the nofileassociate part in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciesExplorer
My itunes and safari icons have both changed to a completely unrecognisable icon. I cannot run either of this programs on my computer. I have tried reinstalling but this didnt work.
View 5 Replies View RelatedI can't find how to start up a program automatically when the computer comes on. It was easy under Win xp but I can't find the command.When I go to msconfig I can see the programs that are loaded but don't see how to list a program to be started.
View 5 Replies View RelatedI started installing Veoh Web Player but decided to abort the installation. Now, every time I boot up, I get a message asking: A previous software installation was not completed. Would you like to continue installing Veoh?
I've tried everything I can think of. Even installed Veoh. But kept getting the message, even after Veoh was installed. Then I removed Veoh using uninstall in Control Panel and I still get the message every time I start up.
I installed a program to my main user account which is an administrator account. When I click on the program to open, the mouse pointer changes like the program is going to load and then it stops. I logged into my second user account which is also an administrative account and the program opens without any problems.
View 1 Replies View RelatedThe new feature of Windows 7 that puts the little arrow on the right side of certain recently used programs, and when expanded shows different tasks. How do I disable this feature? I don't want to see the little arrows, all I do is open the programs, the arrows sometimes get in the way and annoy me. I searched but these keywords didn't yield anything specific to what I was looking for.
I assume it's pretty easy to change, I think I did it on this (Build 7000) computer, but I just setup a Vlited RC1 and can't figure out how to get rid of the arrows it added on the right of the programs on the start menu.
I don't like the way Windows 7 show me the "startup menu"... what I mean is I don't want to see the few software or document i've open recently when I press the "Windows icon" (aka Start).
I need to press "Show all programs" to see all my folder. Even if I go in the config of the toolbar, and I choose 0 to see the last program (by default is 10), it's only show a big white startup menu, but i need again to click (or leave my mouse for few second) the "show all program".
I just want to know of there is a way to see directly the "program" folder when I click the windows logo.
I hope this is the correct place to ask this question. I come from Window XP. I am used to see my long list of programs all spread out so I can see what I have w/o scrolling.
Is there a way to fully display my installed programs w/o scrolling in such a small window above the start button? Have I asked this clearly? LOL. Sometimes, I may not iterate what I am trying to ask.
I have one program in the start menu that will not start , I have to start it manually when I re-start win 7 . Ideas ? I did have a program to give programs admin permissions so they would start automatically but can't seem to find it ..
View 4 Replies View RelatedDownload a Shortcut that Opens the Start Menu in Windows.
View 0 Replies View RelatedHow to Pin or Unpin a Program to the Windows 7 Start Menu ?
View 0 Replies View RelatedMy computer recently prompted me to do a virus scan and after rebooting, it erased all the files and programs on it. I read some posts stating to "unhide" all the folders in windows explorer to help the situation. That seemed to restore alot of programs, but I still can't launch certain programs off the Start Menu nor can I see their shortcut in Windows Explorer. I'm able to open files using those programs from Windows explorer, I just cant open the program itself from the Start Menu. The folders of those programs on the Start Menu say "empty" and no program is displayed.
View 1 Replies View RelatedI recently switched from Vista to 7 (Clean install) and Moderwarfare 1 played fine with vista, however I now get an error when trying to run moder warfare 1, "The program can't start because d3dx9_34.dll is missing"I know 7 uses dx11 which, just like every other directx version, is backwards compatible with the other versions, and I would assume especially 9. I've reinstalled moderwarfare, that didn't work.
View 9 Replies View Relatedif I have a program that is starting with Windows that I do not want to start with windows I can go into msconfig and remove it from the services and startup, but I have a program that I want to start with Windows that isn't listed there so I don know how to do it or if it is even possible.
Specifically, I want Outlook to start with Windows because it is my work computer and I have Outlook open at all times on my machine, so it would just save a little time each day if it started automatically. I might also like to have Chrome start as well because the workorder system is accessed from a browser so again I will need that as well.
