every once and a while when i go and try to browse the internet i have to wait a few min to use it, i mean it says it loads then fails then i press refresh and it works, also in games i play online i stutter, wat i mean is my ping is low however, every few sec or min my screen will just freeze network wise not fps wise, the ppl are moving but in place as in my network doesnt no what to do with them u no what i mean?
how can i fix it i have been using one of these for about 3 years now and it works great and has worked fine in other builds. it doestn require drivers except my ethernet port drivers which 7 installs or has i mean automatically
I have a very new system in terms of hardware (6950 graphics, Core i5 processor, 8GB DDR3 RAM, etc), yet I get consistent stuttering in games. By stutter, I mean a 3-5 second freeze, that happens every few minutes. These only started up about 2 months ago (have had the computer for about 8 months).
The odd thing though, is that when I leave the computer on for a long time, and have run a number of programs/games already, the stuttering disappears. It only really shows up after I freshly restart the computer. When I put the computer to sleep (even for many many hours) instead of shutting it down, I don't have the stuttering when I bring it back awake, like I would if I had shut it down/ started it up.
I've just upgraded to Windows 7 Home Premium from XP and while I love the OS for the most part, I am having issues with a slight stutter or hesitation when playing this game. Happens every 3-5 seconds or so and it's just a quick blip if you will. Never had any issues with this title before and I can play Borderlands and Crysis smooth as butter. Anyone know if Fallout has some issue with Windows 7?
I have a Dell Inspiron laptop. Two years old. I'll be watching a movie or listening to audio and it will stutter for 1-3 seconds every 30seconds to two minutes. I did a memory diagnosis and there was no error to be found. It only started yesterday after I uninstalled a few unnecessary programs and turned a few things off in command prompt. I undid what I did yesterday and it made no difference.
I recently built a new computer (running Windows 7 ultimate 64 bit), and I recently noticed that my mouse cursor is stuttering/slowing down at the top right corner of the screen (about where the close button is). This occurs regardless of what programs I have open. It feels as if there is a magnet in that corner of the screen that is screwing with the cursor.I am using a logitech mouse and checked the Setpoint settings, but acceleration is turned off so I think it is a Windows-related issue.Is there some kind of multiple-monitor setting to prevent one from overshooting the close button?
My specs:
Windows 7 ultimate 64 bit MSI H55M-E33 Motherboard Intel i5 750 LGA 1156 ATI 5770 HD 1GB DDR5 PCI Express G-Skill Ripjaw Series 4GB DDR3 RAM Logitech G5 Laser Mouse
For the last few weeks I've had an issue that occurs the same exact time every day. At exactly 12am, any game that I'm playing or video that I'm watching stutters for about 3 secs. Both the video (FPS if a game) and audio are affected. I've done a search in the event viewer custom views, windows logs, and application and service logs and can't find any warning or event that happens at 12am.
recently my computer started having this issue where it stutters. as in ever few seconds, the screen freezes and my mouse jumps. sound and video also have the stutter as well. this stutter is ongoing no matter how many or few programs i have open, even while sitting on just desktop.
what i'm working off of:
i7-2700k 8gigs of ram amd 6800 x 2 samsung 1T 7200rpm corsair 650W
all my cores are <40C, but i do notice that difference cores will randomly just to 100%. I opened up tasks manager and put update speed to fast. I and can see that my overall cpu jumps to 100% for a fraction of a second, yet indivual cores are jumping all over the place from 0 to 100 and back. i have defragged the disk and done a full virus and malware sweep with no results.
going to be as detailed as possible.About 6 months ago I bought and installed a laptop SSD into my PC. I am using the SSD as my primary drive with Win7, and a secondary HDD as having almost everything else.Whenever I try and play a game off the SSD, or HDD, only left clicking causes this split seconds flash, stutter, and in some games, even though the game is full screen, i click and it clicks through the game, forcing it to minimize and show me the desktop.The first oddity is this does not happen with all games only some, and it does not matter which drive they are on.WoW on my SSD - has this problem on first load, but when I change from Windowed Fullscreen to full screen, and then back to windowed full screen, it stops and does not do it again until I close and load it back up again.Trying to play Amnesia through Steam, both programs on the HDD, clicking on either video setting causes stutters, or click-through to show the desktop, even though it thinks I am still seeing the game. The issue with Amnesia is changing between full/windowed full forces a restart of the game.It is only left click that causes it too, right click does nothing and causes no stuttering. There are other games than the ones listed that it has happened for as well.Again, this only started when I had that SSD installed, and the drive itself has had no problems what-so-ever, just this clicking issue, and SSD install was the only change made prior to having it, where the HDD never did this.
I've been having this problem for the past couple of months and it's driving me insane. I've searched for hours on end without any luck of a fix.The problem is that my mouse lags (or stutters) every 5 seconds. The lag can sometimes be so bad that the mouse completely stops working for a few seconds.I've gone through 3 mice and they've all had the same problem so it can't be because of the mouse.The mouse I'm currently using is the Logitech Anywhere MX.
I have a samsung npqx411w01 with i5 and 6gb, It also has NvidiaGeforce graphics with 1gb dedicated as I enjoy playing BF3. I have had this computer for about 6 months now, and its been great, but over time, despite antivirus/malware/disk cleanups. It just seems to be getting slower. I am at the point now where the audio sounds cracky, and even stutters, I cant play any games since there is a significant lag, as well as with streaming of any kind and Although I thought it may only be with the wifi, it is still limited with an Ethernet cable(the internet may be a separate problem). There was an incident nearly a month ago in which my system completely shut out. I couldn't open windows without safe mode or else I would get a windows error a few seconds after logging in. I was able to restore, but I feel things haven't been the same.
Ever since installing Windows 7 (64 bits) my mouse stutters. Skipping every now and then, staying in one position while I move the mouse, etc. I do a lot of photo editing and it's really annoying and makes my work almost impossible. [code]
I am experiencing a unique issue with my WMC HTPC box. Anytime I watch content from either WMC7 or WMP7 I get audio and video stuttering every minute. Sometimes, the stuttering will cause the box to freeze up, forcing a restart. At no time do I receive memory warnings prior to or after each event. I've tried restarting the computer in the hopes of clearing the RAM, clearing the Temp Files, and running ChkDsk (at the time of this posting, the process has taken over 1 hour to complete - not sure if this is normal). I also installed Process Explorer to see if the issue was memory related. While it appears that WMC is hogging up to 3/4 of my RAM at some points, usage is mostly confined between 1.3-1.7 GB.
The spikes occur regardless of the RAM usage but not when WMC is running idle (meaning ON but not displaying content other than the main menu). Process Explorer appears to show that the issue is possibly related to SVCHOST - when I place my mouse over each spike, it displays SVCHOST but not the programs which that particular version of HOST is running. I am running WMC7 64-bit, with two 500GB drives (one mirrored), a third drive (2TB internal) for video and music, 4GB of RAM, an Intel i3, a Hauppauge 1850 Dual Tuner, and a ASUS P7H55-M PRO motherboard. I will update with ChkDsk info when it finishes.
I played the game for 100 + hours without problem, then this problem appears. Skyrim freezes then resumes then freezes every 5 seconds after playing for a few minutes. I tried re-installing the game, lowering the graphics to low, removing all mods. This is also not a savegame issue, it happens even in a new game. Also tried running in windowed mode, did not fix the issue. I also tried using game booster(to see if a background is causing this). I also tried running the game in my Windows XP partition, got the same problem. I do have the latest drivers and patch. One thing I have noticed is my CPU load goes from around 90% to 30% during the freezing.
I've installed Win 7 Ultimate x86. The problem I'm facing is that whenever I enable my sound card driver and try playing an audio, the audio stutters and the computer freezes. I have to restart, use safe mode to disable the sound card and then use my pc. I've looked all over the net for solutions and these are what I have done so far...
- Downloaded and installed codecs for High Definition Audio Device - Downloaded and installed Windows 7 x86 compatible driver for my sound card (Creative SB Audigy Value). - Disabled all audio enhancements - Changed playback sound to come through speakers (this one automatically happens if I re-enable the sound card).
Just got windows 7 on my computer. Was running windows xp before. Ive been using the mouse i am now for over a year with no problems. Now since i went to windows 7, it often stutters when doing anything on my computer. The stutters usually are about a second long and are completely random. I could be playing a game, browsing the web, or anything else and it will stutter. When it does stutter, i do hear the "bu-dum" sound as if it was being disconnected/reconnected instantly. Sometimes the stutters dont happen for an hour, sometimes i get 5 within 15 seconds. I've tried installing drivers and what not.
i get a little stutter every 2-3 seconds with everything that involves motion pictures e.g games, movies, online games, Internet etc. my music does the same too.happened when i fell asleep watching a movie on Internet, woke up and my screen was black but the pc was still running. turned pc off and back on at the wall, started Internet to watch movie from when i fell asleep.
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open Network and Sharing Center - Open and refreshed Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening? - I have tried DHCP as well as Static addresses - Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it. - Removed Wifi connection and re-added it. - Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
how do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
