I am trying to move the appdata folder for the user "TOM"When i sign in as TOM, and i try to change the location of the folder, i get a warning the files are in use and the operation is cancelled.When i sign in as an admin, the option to move the appdata for TOM is no longer available.
View 9 RepliesI made a really dumb mistake last night while setting up a VPN. Long story short I deleted my user account. Now, I did not lose any data at all (the account's folder still exists, untouched, in the /Users folder), it is just the user account picture and log in information that are gone. I have no way (that I know of) of re-referencing it so that it appears on my log-in screen again.My issue is that I effectively lost some programs and all configuration files that were exclusively associated with that account. Which is years of config data that I would HATE to have to do again. My questions are as follows (which are two sides of the same coin really).
Is there some way to re-reference this user account so it shows up and loads up like normal on windows login once again? (The system displays it as "User Unknown")f not, is there something that I can do with the /AppData folders of the new (recently created) and old ("deleted") accounts to make my new account be just like the old one?
I have a boot drive which is 250gb (My C drive). I have Win 7 and some apps on it.I have installed Steam on my other hard drive. So far most games have been cooperative and install their folders close to Steam!However, one game in particular (Empire Total War) has installed one of its folders in "C:UsersXYZAppDataRoamingThe Creative Assembly".From experience from my old PC, I know this folder (The Creative Assembly) can grow to close to 20gb in a matter of a year. I don't want that to happen and therefore thought of relocating, moving, or redirecting this folder (The Creative Assembly) to another location.How do I do that and is that recommended? (I could simply go ahead and do this right now, but I would rather get some expert opinions first before any instabiliti
View 9 Replies View RelatedI have this backup software (GENIE9) that doesn't work. The vendor tell me I have to deletesome files that are in C:users/programs/appdata. The problem is: even though I am the administrator, I cannot even view what is in that folder, much less delete any files withinit.The vendor (GENIE9) is totally clueless as to how to do this.Apparently the operating system has put some severe restrictions on this folder even for users that are administrators.
View 1 Replies View RelatedBoth my laptop and PC are running out of space in the drive C. Turned out the AppData/Local folder was taking up too much space (more than half of the total of the drive). But then when I selected all the files and folders in the AppData/Local folder, right click/Properties, it said the size was only 250MB.
View 5 Replies View RelatedI need to clear some space from my System drive but the only place from where i can delete the files is AppData folder. But i am confused which files can i delete and from which i cant.
View 9 Replies View RelatedMy google chrome was hanging.So googled around and when i wanted to deleted the temp folder contents i deleted the contents of the local folder.It deleted some 1.3 gb of data.Is it a must to always to delete the contents of this folder or is it okay if i leave it alone.Because there was some contents of 1.3 gb of data.will it affect the way windows operates? how to keep the system running properly and also to remove the junk from my system which tools to use and which folders should i look into make my system running faster.
View 2 Replies View RelatedI recently installed an SSD in my PC, and did a fresh install of Windows 7 in the process. I unplugged the HD with the existing install of Windows 7 during the installation process, and plugged it back in after. Now I'm trying to retrieve some settings for an app I had on my previous installation. But when I go to my old Windows 7 boot drive (now D: ) and try to access the AppData folder, it seems to be showing me the contents of my current AppData folder on C: instead. Is this what Windows does? If so, is there any way around it, so I can retrieve the application data that I'm after?
View 1 Replies View RelatedFollowing a re-load of Windows 7 all my data restored ok but I could not 'see' the PST which is in the Appdata folder. After a couple of attempts to restore to the original location I tried restoring the AppData folder only to another folder on the C drive. Although the Restore facility confirmed Appdata restored and the properties showed the new folder to be of considerable size, it appeared to contain no data. How do I make this 'hidden' data visible so I can restore my PST file from Outlook?Currently running Windows 7 Home Premium 64 Bit.
View 2 Replies View RelatedI'm running Windows 7 x64 and noticed I was down to the last 7 GB of storage on my 120GB app disk. I've only got about 50 GB of apps so it looked like something was amiss. I did some poking around and discovered the Users/username/AppData/Roaming folder had 41 GB of stuff in it. 36 GB is in one folder, Adobe. I have Master Collection CS5, but the program files for all of it (stored in another folder, of course) only add up to about 15 GB.
View 2 Replies View RelatedUnder C:Users<username>AppData, there are three folders.
Local
LocalLow
Roaming
Then under Local, there's LocalVirtualStore
What are the factors and considerations that Windows 7 uses when it determines and allocates a particular file/folder to one of the three main folders?
What is going on with my system. I try to install a program and get an error message saying that it is unable to write to C:Users[MYNAME]AppDataLocalTemp So I open Windows Explorer and check the attributes for that address and all is OK but every time I click on the Application Data folder it seems to replicate itself over and over. One error says that there is not enough space when I have over 65Gb free on that drive.
Screenshots: [URL]
Dell XPS420 Windows 7 Home Premium (x64) Service Pack 1,
I ended up getting infected with some stupid virus and had to ultimately restore to a previous saved instance of my OS.Since then my Owner/administrator account seems to have problems running applications and applying the appropriate permissions. Any apps that use the C:UsersOwnerAppData folder no longer have permission to save files to this location and I cant for the life of me figure out how to fix it.
View 2 Replies View RelatedI have checked the following settings and verified that:
- Show all folders = checked
- Show hidden system files/folders = checked
- Hide protected Operating System files = unchecked
I have also rebooted and tried Safe Mode - same results.
I was trying to display Hidden Folders/files to access an appdata folder under C:Usersusernameappdata. (it's to fix an issue with the game Dead Space 2) Anyway, I opened My Computer, then C drive, then Users. In here, I right clicked on empty space and opened properties. I checked 'Hidden' and apply. Said it needed administrator rights, I accepted. Then most desktop items disappeared, most files from my documents disappeared and after reboot, The ATI catalyst control centre is popping up an error message saying 'failed to start'.I realised I chose to hide all the files within that folder instead of showing hidden files/folders..I went to folder options and chose Show Hidden file and I can see them again but they have that see through look to them. ATI catalyst still won't start on reboot. I tried system restore to yesterday but still exact same.When I go to User Properties on the C drive again, it shows the files as Read Only and Hidden is unchecked.
View 9 Replies View RelatedCan any one tell me a good reason why when I move a folder of folders and files any executables in those folders loose their compatibility and administrative settings?
Is there any way to prevent this happening?
If not, is there any way to apply this setting for a collection of files rather than one by one?
Whenever I move folders from my shared folders ( Users/public/public documents for example) it copies the files instead of just simply moving them. The folders are on the same hard drive/partition so there does not seem to be any reason it should start doing this. I dont know what I could have changed on the computer to cause this to happen either. it is quite a frustrating problem however because large files take a while to transfer when they should be moved instantly.
View 6 Replies View RelatedI'm soon to be installing RC1, and I was thinking of abandoning my raid array and using the two discs thus:
Disc 1 ( ; system and page file
Disc 2 ; Programmes
I had my other discs organised thus:
Disc 3 ; my user's disc
Disc 4 ; My partner's users disc
Disc 5 ; storage / backup / and music stuff.
My question is this, how does one change the location of the programs folder so that it would read:
D:programs instead of C:programs?
I want to move the users folder from C: to D:.
i read, on another forum, that this could be done like so...
Lets imagine you have a PC with 3 accounts.
One is a plain admin account, (administrator) another is an account you have created for the move (adminmove) and the other is a boggo ussr account (user)
Shut down PC (important)
Fire up PC, log on as administrator. Run regedit and go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList
Change profilesdirectory to the new location. Any new users will now have their profiles go there.
go to your documents and settings folder. copy the adminmove and user folders to the new location. You will not get errors about files being locked UNLESS you have services using any of these user accounts to log on. To find out if you do go start>run>services.msc and make sure the log on as section uses no user accounts there.
Leave the S-15-18, S-15-19 and S-15-20 subkeys alone. Those profiles take up next to no space and I wouldn't risk changing them.
You will see some S-15-XX-blah subkeys. These are for the user accounts that exist on the computer. Within each key is a ProfileImagepath REG_EXPAND_SZ
Change these for all but the account you are logged on as.
Shutdown and restart the PC. Log on as adminmove.
start>run>cmd
type set and make sure the USERPROFILE shows the new location.
Move the administrator folder from documents and settings to the new location. Go into regedit again and change the profileimagepath for the administrator account.
Job done. If you want you can delete the profile for the adminmove account and delete the user. Use My computer/properties to delete the profile though. Do not use windows explorer
P.S. If you are determined to move the localservice and networkservice folders, boot in safe mode
This was posted by badass - Move the entire Documents and Settings folder to a different partition?
This has been a pet peeve of mine on Win7 ever since I upgraded months ago.
I'm real big on using Windows Explorer to navigate around my drives, looking at files, photos, movies, whatever. There are two things that the folder list, on the left side of the screen, does differently from it's XP predecessor that bug me:
1) It doesn't auto-expand a folder when I click on it. I have to double-click. Years upon years of doing things one way, and they suddenly change it.
2) This is the one I'm posting about... As I'm browsing down the list on the left, burrowing into sub-folder after sub-folder using the arrows.. right as I'm about to click on a folder that I want to view.. Suddenly the list will SNAP back to the top of the page as if it still thinks I want to be looking at whatever other folder I used to be in (usually the default Libraries folder). So I'll sit there and flip my mouse wheel a few times to get back to where I was.. and it'll SNAP BACK TO THE TOP AGAIN. It also happens when I've selected a particular folder, but I'm trying to navigate to one of the many sub-folders. It'll SNAP back up without warning, putting the root folder that I've selected at the very bottom of the screen, forcing me to scroll down. Again. Also happens when I'm trying to use Explorer to open a file from inside of a program.. File>Open, search, scroll, SNAP, scroll, SNAP, scroll, STOP IT, scroll, there it is. Frankly, it's pissing me off.
If there's one thing that bugs me the most about computers these days, it's when they try to do something "helpful" that I honestly don't want it to do. I know better than Windows what I'm trying to do when I'm using this computer. I am not the AOL-using end user that doesn't know what he's doing.. Technical Support? Yeah, been there, done that.. now I train tech support.. believe me, I know what I'm doing.
Is there some option somewhere to tell Windows to leave Explorer the hell alone when I'm browsing my drives? Get it to play the way I want it to play?
Using Windows 7, my "C" drive is a small solid state drive and all I wish to have on it is my Win 7 operating system. My "D" drive is mechanical and 500 Gig so I would like to have as much as possible on that drive. How do I move my Favorites folder to my "D" drive and have it always available when I open my Internet Explorer?
View 1 Replies View RelatedHow can I point Windows Mail to the new location of my Contacts file?
View 2 Replies View RelatedI want to move the My Documents onto a separate partition, which appears very straightforward in 7.
However, the first time I called the partition (as that was all it was going to be used for) 'My Documents' and just wanted to move the sub folders there.
Unfortunately, having moved the first item 'Desktop', the partition itself became 'Desktop' and behaved like that folder. The only way I could get it back was by creating other users and deleting the initial profile.
Subsequenty, every time I try to move 'My Documents', the folder selected is renamed by Windows to whatever folder I'm moving and the path afterwards reflects that, irrespective of my instruction.
i.e. I want to move 'My Documents' so create a folder called 'Information' (either before or during the move dialogue makes no difference. I confirm the notification to move files and receive confirmation of success.
Bizarrely, the new folder, previously 'Information', is now called 'My Documents'.
I want to move My Documents folder to another partition (D:) but I'm wondering if I do will other users on the computer now be able to access the contents?
View 9 Replies View RelatedThis might be a bit of a dumb question but I just want to check is it safe to directly cut and paste the my favorites, documents, pictures, music and video folders to another hard drive on my PC or I should do them manually through properties of each folder. Currently I'm using windows 7.
View 2 Replies View RelatedWhen I try to rename a folder, I get a comment like something open in another folder or program and I know of nothing that it is open - Hence I cant make a rename. Also if I move a File to another folder, it just copies it and then it wont let me delete the original folder --- Doing this kind of stuff used to be so easy on XP , but I guess one has to learn it all over again.
View 5 Replies View RelatedI'm somewhat confused over correct way to achieve something.I have only just upgraded to Windows 7Previously I had OS on my C drive and 'user' folders on a physically different drive.I have done a little googling .. some results show multiple pages on text on how to do this, another use 'mlink'another using robocopy & whole load of cmd line stuff, another says do it within users profile setting.hat is the simple way of moving the 'users' folder (with the number of sub user folders) to a different drive, and removing the original folders ... i.e. keeping the house clean.Purpose is to keep user data such as my documents etc
View 6 Replies View RelatedI'm running the 32 bit version of Windows 7 and it's fully up to date in terms of patches. This issue only affects libraries. The issue started out of the blue a couple of weeks ago. I hadn't installed any new software or changed any settings and I also tried using System Restore to go back to a couple of days before this issue started?
1. I go into my library called "Videos" and right-click and choose New - Folder. The new folder does not appear.
2. I either press F5 or right-click - refresh and then I can see the new folder I created.
3. I give the new folder a name, for example "test". The folder shows the name "test".
4. I rename the folder to something else, for example "renamedtest". The folder still shows the name as "test".
5. I either press F5 or right-click - refresh and then the folder name changes to "renamedtest".
Basically, any time I create a folder, rename a file or folder, delete a file/folder, move a file/folder etc. I do not see the effects of my actions until after I've manually refreshed. This only affects libraries.
our emloyees click on a folder to highlite it and at times it gets moved into the folder below it. How do we stop the from happing?
View 11 Replies View RelatedI have an existing folder. How do I move recent documents into the existing folder? I can't seem to figure it out
View 2 Replies View RelatedI notice that one of my backup programs has selected all the folders in my User folder to be backed up. Among those selected is the hidden folder AppData, containing 8800 files. Since there are files in there that seem to change daily, it slows down the daily backup. I am wondering if there is really anything in there that I need to back up. I've read that some older versions of Outlook and sometimes Windows Live Mail put data in there, but in the past I've restored computers and I've never copied anything from AppData. It does not seem to be the stored emails, perhaps it is confuguration data? So my question is, can I remove AppData from my backup job and what might I be losing?
View 9 Replies View Related