My Windows 7 ultimate x64 is rebooting itself at the welcome/logon screen, in safe mode only. Normal mode is fine. The reboot happens instantly, after a few seconds at the welcome screen, the screen goes black and the system is rebooted as though I had hit the "reboot" button on the case, with no clean shutdown taking place. I am at a loss to know what could be starting in safe mode, that _doesn't_ start in normal mode, to cause this.
I have recently done a repair install of windows (the problem was there before that), I have tried replacing the safe mode parts of the registry with clean ones downloaded from an AV vendor website (mcafee if I remember correctly), and have tried doing sfc /scannow which resulted in a corrupted boot.sdi being replaced with the archived copy. None of these have fixed the problem.
Obviously, given that I have a usable normal mode, and good backups, this isn't the biggest problem ever, but it would be nice to get it fixed especially for the next time I need to fix a dodgy driver install or similar. What I can check next, particularly in regards to understanding the startup process and what will be loading at the welcome screen that might be causing the reboot.
I have windows 7 home premium 32 bit dell laptop. Lately, it takes more than 10 minutes before it boots before the windows logo appears). From there the computer works normally. I got a suggestion to check for malwares or viruses so that is what I did. I started by going to msconfig and edited the boot options to start automatically to safe mode with networking, then rebooted my system. After booting, it loaded up the initial screen of safe mode, but then it restarted by itself.
I am now stuck on this reboot loop going into safe mode, it won't even let me go back to normal mode. I went to startup repair, but it didn't find anything, so had to reboot again onto the same situation. I have searched for possible answers, and the best that I could get was to remove the safe boot options and go back to normal mode. The syntax to type was bcdedit /deletevalue {default} safe boot but it didn't work, same with bcdedit /deletevalue safe boot.
I am getting this : "An error occurred while attempting to delete the specified data element. Element not found."
I've been looking for a fix for 5 hours and no luck- System restarts as soon as it enters the splash screen, but I can enter into safe mode - SFC /SCANNOW Detects nothing.
Tried bootrec commands and did nothing.. . Tried chkdsk /f /r and still nothing. . . Tried start up repair like 30+ times and it didn't fix it and said no root cause.
I have a boot drive which is 250gb (My C drive). I have Win 7 and some apps on it.I have installed Steam on my other hard drive. So far most games have been cooperative and install their folders close to Steam!However, one game in particular (Empire Total War) has installed one of its folders in "C:UsersXYZAppDataRoamingThe Creative Assembly".From experience from my old PC, I know this folder (The Creative Assembly) can grow to close to 20gb in a matter of a year. I don't want that to happen and therefore thought of relocating, moving, or redirecting this folder (The Creative Assembly) to another location.How do I do that and is that recommended? (I could simply go ahead and do this right now, but I would rather get some expert opinions first before any instabiliti
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
I have this backup software (GENIE9) that doesn't work. The vendor tell me I have to deletesome files that are in C:users/programs/appdata. The problem is: even though I am the administrator, I cannot even view what is in that folder, much less delete any files withinit.The vendor (GENIE9) is totally clueless as to how to do this.Apparently the operating system has put some severe restrictions on this folder even for users that are administrators.
I made a really dumb mistake last night while setting up a VPN. Long story short I deleted my user account. Now, I did not lose any data at all (the account's folder still exists, untouched, in the /Users folder), it is just the user account picture and log in information that are gone. I have no way (that I know of) of re-referencing it so that it appears on my log-in screen again.My issue is that I effectively lost some programs and all configuration files that were exclusively associated with that account. Which is years of config data that I would HATE to have to do again. My questions are as follows (which are two sides of the same coin really).
Is there some way to re-reference this user account so it shows up and loads up like normal on windows login once again? (The system displays it as "User Unknown")f not, is there something that I can do with the /AppData folders of the new (recently created) and old ("deleted") accounts to make my new account be just like the old one?
Both my laptop and PC are running out of space in the drive C. Turned out the AppData/Local folder was taking up too much space (more than half of the total of the drive). But then when I selected all the files and folders in the AppData/Local folder, right click/Properties, it said the size was only 250MB.
I need to clear some space from my System drive but the only place from where i can delete the files is AppData folder. But i am confused which files can i delete and from which i cant.
My google chrome was hanging.So googled around and when i wanted to deleted the temp folder contents i deleted the contents of the local folder.It deleted some 1.3 gb of data.Is it a must to always to delete the contents of this folder or is it okay if i leave it alone.Because there was some contents of 1.3 gb of data.will it affect the way windows operates? how to keep the system running properly and also to remove the junk from my system which tools to use and which folders should i look into make my system running faster.
I recently installed an SSD in my PC, and did a fresh install of Windows 7 in the process. I unplugged the HD with the existing install of Windows 7 during the installation process, and plugged it back in after. Now I'm trying to retrieve some settings for an app I had on my previous installation. But when I go to my old Windows 7 boot drive (now D: ) and try to access the AppData folder, it seems to be showing me the contents of my current AppData folder on C: instead. Is this what Windows does? If so, is there any way around it, so I can retrieve the application data that I'm after?
This issue is happening on a Workstation PC with Windows 7 Pro 64-bit....the last software update before login crash was Trend Micro corporate Officescan if that helps at all.
Following a re-load of Windows 7 all my data restored ok but I could not 'see' the PST which is in the Appdata folder. After a couple of attempts to restore to the original location I tried restoring the AppData folder only to another folder on the C drive. Although the Restore facility confirmed Appdata restored and the properties showed the new folder to be of considerable size, it appeared to contain no data. How do I make this 'hidden' data visible so I can restore my PST file from Outlook?Currently running Windows 7 Home Premium 64 Bit.
I'm running Windows 7 x64 and noticed I was down to the last 7 GB of storage on my 120GB app disk. I've only got about 50 GB of apps so it looked like something was amiss. I did some poking around and discovered the Users/username/AppData/Roaming folder had 41 GB of stuff in it. 36 GB is in one folder, Adobe. I have Master Collection CS5, but the program files for all of it (stored in another folder, of course) only add up to about 15 GB.
Under C:Users<username>AppData, there are three folders.
Local LocalLow Roaming
Then under Local, there's LocalVirtualStore
What are the factors and considerations that Windows 7 uses when it determines and allocates a particular file/folder to one of the three main folders?
What is going on with my system. I try to install a program and get an error message saying that it is unable to write to C:Users[MYNAME]AppDataLocalTemp So I open Windows Explorer and check the attributes for that address and all is OK but every time I click on the Application Data folder it seems to replicate itself over and over. One error says that there is not enough space when I have over 65Gb free on that drive.
Screenshots: [URL] Dell XPS420 Windows 7 Home Premium (x64) Service Pack 1,
I ended up getting infected with some stupid virus and had to ultimately restore to a previous saved instance of my OS.Since then my Owner/administrator account seems to have problems running applications and applying the appropriate permissions. Any apps that use the C:UsersOwnerAppData folder no longer have permission to save files to this location and I cant for the life of me figure out how to fix it.
I was trying to display Hidden Folders/files to access an appdata folder under C:Usersusernameappdata. (it's to fix an issue with the game Dead Space 2) Anyway, I opened My Computer, then C drive, then Users. In here, I right clicked on empty space and opened properties. I checked 'Hidden' and apply. Said it needed administrator rights, I accepted. Then most desktop items disappeared, most files from my documents disappeared and after reboot, The ATI catalyst control centre is popping up an error message saying 'failed to start'.I realised I chose to hide all the files within that folder instead of showing hidden files/folders..I went to folder options and chose Show Hidden file and I can see them again but they have that see through look to them. ATI catalyst still won't start on reboot. I tried system restore to yesterday but still exact same.When I go to User Properties on the C drive again, it shows the files as Read Only and Hidden is unchecked.
We used to map a network location an http site in Windows XP. Worked well, but under Windows 7 when we map the same location we show an empty folder and it should contain all the links from the site. I did notice that when we tried this on a different XP box we were prompted for the user ID and Password to login to the share (makes sense to me... ) but there was no prompt in Windows 7 - instead we just get "This Folder Is Empty" Did I miss something? We can access the website in IE... did not try to access the share using the computer name instead of the website... could try that.... however they use the mapping as above because they still use FrontPage to administer the site and this method provides the mappings etc that FrontPage likes to have.
I'm sharing a folder with other PCs on the network and it works fine, except in this case:1. file in D:folder1 (normal folder)2. move file to D:folder2 (shared folder)3. file not visible from other PCs
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
I have put custom folder icons (pictures basically), for some of my folders. I can see the custom folder icons, But when other computers on my network access the folders (they are shared), they can't see the custom icons. All the see are the default folder icons.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.