Have To Manually Refresh After Renaming/moving/creating New Folder Etc
Nov 14, 2011
I'm running the 32 bit version of Windows 7 and it's fully up to date in terms of patches. This issue only affects libraries. The issue started out of the blue a couple of weeks ago. I hadn't installed any new software or changed any settings and I also tried using System Restore to go back to a couple of days before this issue started?
1. I go into my library called "Videos" and right-click and choose New - Folder. The new folder does not appear.
2. I either press F5 or right-click - refresh and then I can see the new folder I created.
3. I give the new folder a name, for example "test". The folder shows the name "test".
4. I rename the folder to something else, for example "renamedtest". The folder still shows the name as "test".
5. I either press F5 or right-click - refresh and then the folder name changes to "renamedtest".
Basically, any time I create a folder, rename a file or folder, delete a file/folder, move a file/folder etc. I do not see the effects of my actions until after I've manually refreshed. This only affects libraries.
When I try to rename a folder, I get a comment like something open in another folder or program and I know of nothing that it is open - Hence I cant make a rename. Also if I move a File to another folder, it just copies it and then it wont let me delete the original folder --- Doing this kind of stuff used to be so easy on XP , but I guess one has to learn it all over again.
about 2 weeks ago i installed windows on a new custom built computer, and everything was fine till about 3 or 4 days ago when it suddenly wouldn't let me empty the recyle bin, or move or rename any file from anywhere, not even my external HD. It doesn't give me any error when I try, just nothing happens at all. Also when i try to make a new file or folder inside an existing one i get a system error 340. I've tried booting into safe mode and deleting/moving/renaming and nothing. Same with Unlocker nothing seems to work. Ide hate to have to install windows again and loose things i have downloaded since i can't move them to my external HD or burn them on a disk.
I just made my partition with 14GB memory only. I have always an error that my partition is already full, but my folder I backupped is just 9GB.I want to ask if it is okay to cut and paste to my folder (pictures) to my new partition.
Under computer I go to my drive of folders. When I click new folder either by right clicking or by hitting new folder the system then creates 2 or 3 new folders at one time. I then have to go back and delete the extra folders. At first I did not mind because it only happened once or twice and now it is every time.
Just bought a new PC. Runs Windows 7 Home Premium 64-Bit. I'm new to Windows 7 but have used previous Windows versions for years and years (but not Vista). And I've never seen this happen with any other operating system. Out of the box, Windows 7 sets up this "My Documents" & "Public Documents" system of folders (and the same for pictures, music and videos). And that's great for separating each user's documents and providing common folders which all users can see. But, shortly after setting my new PC up (installed a printer & some other hardware bits, installed Office & copied my document files across from the old PC), Windows suddenly renamed the "My" & "Public" versions of the documents, music & videos folders. Looking at it all via my own account (I'm admin, by the way), I had folders called "Documents" & "Documents" instead of "My Documents" and "Public Documents" (and the same for music & videos). But it kindly left me with "My Pictures" and "Public Pictures" folders. This has actually happened on two machines now. It happened on the original new PC. But the store exchanged it with an identical new machine
I seem to remember seeing a tool called file 2 folder which puts a files into thier own folder and names the folder the same as the original file, i have had a search both here and google but have not managed to find it. Also, I have a fair few folders all containing 1 file, the folders are named correctly but the files inside are not, is there an easy to make the files match the folder they are in?
Why is it everytime I want to rename a folder for instance of music, that has never even been opened yet, i always get "The action can't be completed because a folder or file in it is open in another program"?
I've recently picked up a new hard drive from a buddy of mine.I've managed to change my computer name and user account name.However, the user folder in "My Computer -> Local Disk C: -> Users" is locked, and I am unable to change the name.It doesn't cause any problems, I just want to find a way to change it if its possible.As well, I've also set permissions, but it only allows me to access the files, which is not the problem, since I only want to change the name of the User Account Folder.
I finally got around to recognizing the use of the Libraries feature in Windows 7, and can't believe I didn't realize it earlier. Anyways, my question is, I have 2 folders in a Library with the same name (but point to different locations), basically they contain the same files but one resides in My Dropbox and one resides on my local HD. When I rename a folder in Libraries (to distinguish btwn the 2), it also renames that folder in the actual folder location. I was wondering if I could ONLY rename the folders in the Libraries view, without having it reflect on the actual folder name. Also, I was wondering if any of you have used the Libraries feature as an Application Launcher (ie. creating different Libraries for Programs, Games, etc.), and would like to know how that works/worked out.
So I have a 16 GB Cruzer USB and it's not connecting, recognizing, nothing. Usually, the usb stick lights up, but it's not even doing that. I remember a couple of years ago I had this problem, I looked up a solution and was able to open the usb up by going through... aghh this is what I can't remember.
It's manually opening up the usb by going through some 'coding'-ish steps.
The screen I used to type in the coding was black, with white text. I think I remember typing in dmnt.mgt (Not exactly it but kind of like that??) Either way.. how can I open up my usb?
I've got a weird problem I couldn't find any solutions for on google. In trying to move my 'Users' folder to my new 1 TB Media Drive M: I accidently moved the directory (right click>Properties>Location Tab>Change directory path) "C:UsersScottMy Music" to "M:UsersMy Music" where the system MERGED it with "C:UsersScott" instead of creating it adjacent to that directoryAfter that the system has decided that the directory structure of "M:UsersScott" is the same as "M:UsersMy Music" so whenever I move a file or folder to "M:UsersScott" in trying to complete the migration it puts it in "M:UsersMy Music" instead.If I create a new folder in "M:Users" and rename it to 'Scott' the system asks if I wanted to merge the two folders as it thinks Scott already exists, even if it shows My MusicThis problem is not a huge issue and because of other potential problems this may have caused I am going to create a new profile, move my data over, and remove this profile, but I wanted to find out what is causing thi
I'm setting up my new desktop that has Windows 7 on it.I created a SHORT CUTS FOLDER on my old computer which had icons to run programs so my desktop wouldn't be cluttered.How do I setup something like this with Windows 7?I have the used all the time programs in plain view likethe Firefox browser. moranacus has chosen the best answer to his/her question.Click here to view the answer that was selected.
Running: Win 7 Home Premium 64 bit, service pack 1Logged in under account with administrator privileges (checked)I am trying to rename a folder that lives here: C:UsersUsernameAppDataRoamingWhen I right click on it and select rename and change the name ".foldername" to ".foldername2" I get the following error from Windows: "You must type a filename"Not sure what it's trying to tell me... But the "new" folder name ".foldername2" doesn't exist... I googled but didn't find any info about rules for managing directories that live under the roaming folder.
I have numerous folders each of which contain jpg images. I need to create shortcuts to all these images but I need the shortcut to be created in the same folder as the original image. How can I do this without selecting each file individually and creating the shortcut? I have tried using the search facility to identify all the jpgs but can only create shortcuts to the desktop this way.
as I have been unsuccessful finding a solution at the ATI forums I thought I would try to pick the minds of all the clever people here. Does any know how to prevent 'AMD VISION Engine Control Center' from creating a start menu program folder at boot?
Can any one tell me a good reason why when I move a folder of folders and files any executables in those folders loose their compatibility and administrative settings?
Is there any way to prevent this happening?
If not, is there any way to apply this setting for a collection of files rather than one by one?
Whenever I move folders from my shared folders ( Users/public/public documents for example) it copies the files instead of just simply moving them. The folders are on the same hard drive/partition so there does not seem to be any reason it should start doing this. I dont know what I could have changed on the computer to cause this to happen either. it is quite a frustrating problem however because large files take a while to transfer when they should be moved instantly.
I made a really dumb mistake last night while setting up a VPN. Long story short I deleted my user account. Now, I did not lose any data at all (the account's folder still exists, untouched, in the /Users folder), it is just the user account picture and log in information that are gone. I have no way (that I know of) of re-referencing it so that it appears on my log-in screen again.My issue is that I effectively lost some programs and all configuration files that were exclusively associated with that account. Which is years of config data that I would HATE to have to do again. My questions are as follows (which are two sides of the same coin really).
Is there some way to re-reference this user account so it shows up and loads up like normal on windows login once again? (The system displays it as "User Unknown")f not, is there something that I can do with the /AppData folders of the new (recently created) and old ("deleted") accounts to make my new account be just like the old one?
i read, on another forum, that this could be done like so... Lets imagine you have a PC with 3 accounts.
One is a plain admin account, (administrator) another is an account you have created for the move (adminmove) and the other is a boggo ussr account (user)
Shut down PC (important)
Fire up PC, log on as administrator. Run regedit and go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList
Change profilesdirectory to the new location. Any new users will now have their profiles go there.
go to your documents and settings folder. copy the adminmove and user folders to the new location. You will not get errors about files being locked UNLESS you have services using any of these user accounts to log on. To find out if you do go start>run>services.msc and make sure the log on as section uses no user accounts there.
Leave the S-15-18, S-15-19 and S-15-20 subkeys alone. Those profiles take up next to no space and I wouldn't risk changing them.
You will see some S-15-XX-blah subkeys. These are for the user accounts that exist on the computer. Within each key is a ProfileImagepath REG_EXPAND_SZ
Change these for all but the account you are logged on as. Shutdown and restart the PC. Log on as adminmove.
start>run>cmd
type set and make sure the USERPROFILE shows the new location.
Move the administrator folder from documents and settings to the new location. Go into regedit again and change the profileimagepath for the administrator account.
Job done. If you want you can delete the profile for the adminmove account and delete the user. Use My computer/properties to delete the profile though. Do not use windows explorer
P.S. If you are determined to move the localservice and networkservice folders, boot in safe mode
This was posted by badass - Move the entire Documents and Settings folder to a different partition?
This has been a pet peeve of mine on Win7 ever since I upgraded months ago.
I'm real big on using Windows Explorer to navigate around my drives, looking at files, photos, movies, whatever. There are two things that the folder list, on the left side of the screen, does differently from it's XP predecessor that bug me:
1) It doesn't auto-expand a folder when I click on it. I have to double-click. Years upon years of doing things one way, and they suddenly change it.
2) This is the one I'm posting about... As I'm browsing down the list on the left, burrowing into sub-folder after sub-folder using the arrows.. right as I'm about to click on a folder that I want to view.. Suddenly the list will SNAP back to the top of the page as if it still thinks I want to be looking at whatever other folder I used to be in (usually the default Libraries folder). So I'll sit there and flip my mouse wheel a few times to get back to where I was.. and it'll SNAP BACK TO THE TOP AGAIN. It also happens when I've selected a particular folder, but I'm trying to navigate to one of the many sub-folders. It'll SNAP back up without warning, putting the root folder that I've selected at the very bottom of the screen, forcing me to scroll down. Again. Also happens when I'm trying to use Explorer to open a file from inside of a program.. File>Open, search, scroll, SNAP, scroll, SNAP, scroll, STOP IT, scroll, there it is. Frankly, it's pissing me off.
If there's one thing that bugs me the most about computers these days, it's when they try to do something "helpful" that I honestly don't want it to do. I know better than Windows what I'm trying to do when I'm using this computer. I am not the AOL-using end user that doesn't know what he's doing.. Technical Support? Yeah, been there, done that.. now I train tech support.. believe me, I know what I'm doing.
Is there some option somewhere to tell Windows to leave Explorer the hell alone when I'm browsing my drives? Get it to play the way I want it to play?
Using Windows 7, my "C" drive is a small solid state drive and all I wish to have on it is my Win 7 operating system. My "D" drive is mechanical and 500 Gig so I would like to have as much as possible on that drive. How do I move my Favorites folder to my "D" drive and have it always available when I open my Internet Explorer?
I want to move the My Documents onto a separate partition, which appears very straightforward in 7.
However, the first time I called the partition (as that was all it was going to be used for) 'My Documents' and just wanted to move the sub folders there.
Unfortunately, having moved the first item 'Desktop', the partition itself became 'Desktop' and behaved like that folder. The only way I could get it back was by creating other users and deleting the initial profile.
Subsequenty, every time I try to move 'My Documents', the folder selected is renamed by Windows to whatever folder I'm moving and the path afterwards reflects that, irrespective of my instruction.
i.e. I want to move 'My Documents' so create a folder called 'Information' (either before or during the move dialogue makes no difference. I confirm the notification to move files and receive confirmation of success.
Bizarrely, the new folder, previously 'Information', is now called 'My Documents'.
I want to move My Documents folder to another partition (D:) but I'm wondering if I do will other users on the computer now be able to access the contents?
This might be a bit of a dumb question but I just want to check is it safe to directly cut and paste the my favorites, documents, pictures, music and video folders to another hard drive on my PC or I should do them manually through properties of each folder. Currently I'm using windows 7.
I'm somewhat confused over correct way to achieve something.I have only just upgraded to Windows 7Previously I had OS on my C drive and 'user' folders on a physically different drive.I have done a little googling .. some results show multiple pages on text on how to do this, another use 'mlink'another using robocopy & whole load of cmd line stuff, another says do it within users profile setting.hat is the simple way of moving the 'users' folder (with the number of sub user folders) to a different drive, and removing the original folders ... i.e. keeping the house clean.Purpose is to keep user data such as my documents etc
Every time I try to rename a folder I get the error message titled "Item not Found" and the text inside says: "Could not find this item This is no longer located in <Folder Directory>. Verify the item's location and try again."
If I click try again, (only have to once), it renames the folder, but if I click cancel, it doesn't rename the file. This wasn't a big deal until recently it has started to get annoying.
